Forward rotor

Added: Jul 15, 2014 9:21 am

NSN# 1005-01-044-6074 / 26 EA w/100% OPTION (52 EA)
OPEN/CLOSE: 7/30/14 - 8/29/14
*****************************************************

ROTOR, FORWARD

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND
SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS
REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT
CONTROL ACT (22 U.S.C.A. 2778-2799).  ANY
MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS
REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE
TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.
DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED
PRIOR TO AWARD.  ADDITIONAL EXPORT RESTRICTIONS APPLY
AS INDICATED HEREIN.  FAILURE TO SUBMIT DDTC
REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER
INELIGIBLE FOR AWARD

NO DATA IS AVAILABLE.  THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR EVALUATION.

This item contains a phosphate coating requirement
IAW MIL-STD-171 and MIL-DTL-16232.  In lieu of the
required submittal of a preproduction phosphate
procedure the following is now required:  The
contractor responsible for the actual coating
procedure must be certified by the Performance Review
Institute (PRI) to the Nadcap standard for chemical
processes.  Verification of this certification may be
required and must be supplied upon request of the
Contracting Officer.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA
AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED
THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE
DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO
INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY
CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE
WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF
GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL
DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN
APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO
RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE:  JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25."

DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS
SOLICITATION, THEREFORE SURPLUS MATERIAL WILL
NOT BE CONSIDERED. IF PRESENT IN THE
SOLICITATION, PROVISION 52.211-9003 AND CLAUSE
52.211-9000 ARE NOT APPLICABLE.

GENERAL DYNAMICS-OTS, INC. DBA 05606 P/N 205F335

IAW REFERENCE DRAWING NR 05606 205F335
REVISION NR W   DTD 04/23/1986
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 205F335
REVISION NR AP  DTD 10/04/2001
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 A10345
REVISION NR A   DTD 01/06/1983
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 304A835
REVISION NR D   DTD 03/15/1991
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 119A2115
REVISION NR R   DTD 08/08/2006
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 891C700
REVISION NR C   DTD 06/28/1976
PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-PRF-46010H
REVISION NR H   DTD 10/02/2006
PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-16232G NOT 1
REVISION NR G   DTD 10/03/2006
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1
REVISION NR 34  DTD 10/03/2006
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1
REVISION NR 84  DTD 10/03/2006
PART PIECE NUMBER:

IAW REFERENCE UNK QPL-46010-18 NOT 1
REVISION NR 18  DTD 10/03/2006
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485
REVISION NR C   DTD 09/05/2008
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 304A843
REVISION NR V   DTD 03/21/2012
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP010446074
REVISION NR A   DTD 07/10/2010
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 PHOS-OUTLINE-16232
REVISION NR A   DTD 10/15/2010
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 PHOS-OUTLINE-DRY
REVISION NR A   DTD 10/15/2010
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 PHOS-QAR-CHECK
REVISION NR A   DTD 10/15/2010
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 PHOS-DL-MANG
REVISION NR     DTD 11/05/2010
PART PIECE NUMBER: