F118-GE-100 front frame assembly

Added: Sep 16, 2009 11:59 am REMANUFACTURE F118 FRONT FRAME ASSEMBLY, SOL FA8121-09-R-0078, PR FD2030-09-07967. Buying Office: 448 SCMG/PKBB, TINKER AFB OK 73145-3015. For additional information contact Albert Long (405) 734-4629. A firm fixed-price Requirements Type Commercial Contract is contemplated with one basic year and 4 (four) one year options. Item 0001: NOUN - Teardown, Inspect and Quote; Input/Output NSN 2840-01-296-9470LR, 2840-01-500-2245LR, 2840-01-388-0213LR, 2840-01-500-2246LR, 2840-01-464-6760LR, 2840-01-506-8112LR, 2840-01-531-1394LR, and 2840-01-528-4199LR; Input/Output P/N's 9545M13G03/G04/G05/G19/G20/G21/G22/G36/G42/G44/G45/G46/G47. BEQ as follows: 3 EA Basic Year; 4 EA OPT I; 4 EA OPT II; 2 EA OPT III; 2 EA OPT IV. Applicable to the F118 Engine on the B-2; Dest: Tinker Air Force Base, OK 73145. Item 0002: Remanufacture of the F118 Front Frame Assembly. NSN's, P/N's and BEQ's the same as Item 0001. Item 0003: Comprehensive Engine Management System (CEMS) Required IAW DD Form 1423-1. Item 0004: AFMC FORM 413 Depot Maintenance Production Report Required IAW DD Form 1423-1. Item 0005: CAV II/CAV AF Reporting required IAW DD Form 1423-1. Item 0006 Deficiency Reporting required IAW DD Form 1423-1. Item 0007: AFMC Form Teardown Deficiency Report Required IAW DD Form 1423-1. Description: The F118 Front Frame provides the structural support of the fan rotor through the #1 bearing, provides the forward mounting point for the engine to the B-2 airframe, directs intake air into the fan rotor, and contributes to the radar absorptive capability of the B-2 weapon system. Delivery: Item 0001: 5 EA 30 days ARO and receipt of reparable assets; Item 0002: TBD; Item 0003: IAW DD Forms 1423; Item 0004: IAW DD Forms 1423; Item 0005: IAW DD Forms 1423; Item 0006: IAW DD Forms 1423; Item 0007: IAW DD Forms 1423 Qualification requirements: Sources must be qualified prior to being considered for award. Qualification requirements are available for this acquisition. The approximate solicitation issue date is 1 OCT 09 and the estimated solicitation response date will be 29 OCT 09. The anticipated award date will be 15 DEC 09. Electronic procedures will be used for this solicitation through FedBizOpps at http://www.eps.gov/. THIS IS A SOLE SOURCE REQUIREMENT. GE ENGINE SERVICES (062W2) IS THE ONLY APPROVED SOURCE. All responsible sources solicited may submit a bid, proposal, or quotation that shall be considered. Award will be made only if the offeror, the product/service or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Please contact: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 in writing for further information concerning the source approval process. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. See Note (s) 22 and 23.