Cylinder Rolling Bearing

The Air Force Sustainment Center (AFSC) is contemplating to procure the manufacture of the Cylinder Roller Bearings. This is for a 5-Year (one 3-year Base period and two 1-year Option periods) Multiple-Year Indefinite Delivery Indefinite Quantity (IDIQ) Firm Fixed Price (FFP) Competitive Contract. Minimum quantity is 14 each and total contract maximum quantity is 252 each.

This item has been identified as a critical safety item by cognizant engineering authority.

1. Estimated issue date and estimated closing/response date - Issue Date: 8 April 2019
Closing Date: 8 May 2019
2. PR# - FD2030-18-01769
3. This will be an IDIQ Type contract
4. Spare - New Manufacture
5. Item - Cylinder Rolling Bearing
6. NSN - 3110-01-319-3657 NZ
7. PN - 4067896 (OEM)
8. Description -
CLIN 0001: Cylinder Rolling Bearing Item Material: 725 Steel and Cage is AMS 6415 Steel;
CLIN 0002: CEMS Tracking
9. Total Line Item Quantity (Best Estimated Quantity):
L/I 0001 - The Best Estimated Quantity is 168 each, minimum quantity is 14 each and total contract maximum quantity is 252 each.
L/I 0002 - 1 unit(s) monthly
10. Application (Engine or Aircraft) - F100-PW-229 Engine-Fan Drive Turbine Module
11. Destination: FOB Origin: Ship to Code: SW3211; DLA Distribution Depot of Oklahoma; Central Receiving 3301 F Avenue; Building 506 Door 22; Tinker AFB, OK 73145-8000
12. Delivery: CLIN 0001- 20 each per month ARO, CLIN 0002 - 1 each per month
13. IUID: Note to Contractor: If unit price exceeds $5,000 then UID requirements will apply.
14. Buyer name, phone#, and email address: Anna Mroz 405-734-4629, anna.mroz.2@us.af.mil
15. AMC Code: 1/B

This requirement is for the manufacture of the cylinder roller bearing for the F100 engine program. Sources must be qualified prior to award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards. Additional sources for this item require engineering source approval by the original equipment manufacturer, United Technologies Corporation, DBA: Pratt Whitney Spare Parts Division. This item is not export controlled.

Currently approved sources: The Timken Co, FAG Aerospace, Inc., SKF USA, Inc., MPB Corp.

Electronic procedures will be used for this solicitation. IAW FAR 5.207 (c) (15) (ii), all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

NOTE: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

.

The Air Force Sustainment Center (AFSC) is contemplating to procure the manufacture of the Bearing, Roller, Cylinder. This is for a 3-Year Multi-Year Requirements type IDIQ contract for a Firm Fixed Price (FFP) Competitive Contract. Minimum quantity is 13 each and total contract maximum quantity is 240 each.

This item has been identified as a critical safety item by cognizant engineering authority.

1. Estimated issue date and estimated closing/response date - issued 9 July 2018

Closes 09 August 2018

2. PR# - FD2030-18-01769

3. This will be an IDIQ Requirements Type contract

4. Spare - New Manufacture

5. Item - Cylinder Rolling Bearing

6. NSN - 3110-01-319-3657 NZ

7. PN - 4067896 (OEM)

8. Description -

CLIN 0001: Cylinder Rolling Bearing Item Material: 725 Steel and Cage is AMS 6415 Steel;

CLIN 0002: CEMS Tracking

9. Total Line Item Quantity (Best Estimated Quantity):

L/I 0001 - The Best Estimated Quantity is160, Minimum quantity is 13 each and total contract maximum quantity is 240 each.

L/I 0002 - 1 unit(s) monthly

10. Application (Engine or Aircraft) - F100-PW-229 Engine-Fan Drive Turbine Module

11. Destination: FOB Origin: Ship to Code: SW3211; DLA Distribution Depot of Oklahoma; Central Receiving 3301 F Avenue; Building 506 Door 22; Tinker AFB, OK 73145-8000

12. Delivery: CLIN 0001- 20 each per month ARO, CLIN 0002 - 1 each per month

13. IUID: Note to Contractor: If unit price exceeds $5,000 then UID requirements will apply.

14. Buyer name, phone#, and email address: Alexandra Crothers 405-734-4629, alexandra.crothers@us.af.mil

15. AMC Code: 1/B

This requirement is for the manufacture of the cylinder roller bearing for the F100 engine program. Sources must be qualified prior to award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards. Additional sources for this item require engineering source approval by the original equipment manufacturer, United Technologies Corporation, DBA: Pratt Whitney Spare Parts Division. This item is not export controlled.

Currently approved sources: The Timken Co, FAG Aerospace, Inc., SKF USA, Inc., MPB Corp.

Electronic procedures will be used for this solicitation. IAW FAR 5.207 (c) (15) (ii), all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

NOTE: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

.

Added: Jun 22, 2018 2:44 pm  

The Air Force Sustainment Center (AFSC) is contemplating to procure the manufacture of the Bearing, Roller, Cylinder.  This is for a 3-Year Multi-Year Requirements type IDIQ contract for a Firm Fixed Price (FFP) Competitive Contract. Minimum quantity is 13 each and total contract maximum quantity is 240 each.

This item has been identified as a critical safety item by cognizant engineering authority. 

1. Estimated issue date and estimated closing/response date - issued 9 July 2018

Closes 09 August 2018

2. PR# - FD2030-18-01769

3. This will be an IDIQ Requirements Type contract

4. Spare - New Manufacture

5. Item - Cylinder Rolling Bearing

6. NSN - 3110-01-319-3657 NZ

7. PN - 4067896 (OEM)

8. Description -

CLIN 0001: Cylinder Rolling Bearing Item Material: 725 Steel and Cage is AMS 6415 Steel;

CLIN 0002: CEMS Tracking

9. Total Line Item Quantity (Best Estimated Quantity):

L/I 0001 - The Best Estimated Quantity is160, Minimum quantity is 13 each and total contract maximum quantity is 240 each.

            L/I 0002 - 1 unit(s) monthly

10. Application (Engine or Aircraft) - F100-PW-229 Engine-Fan Drive Turbine Module

11. Destination: FOB Origin: Ship to Code: SW3211; DLA Distribution Depot of Oklahoma; Central Receiving 3301 F Avenue; Building 506 Door 22; Tinker AFB, OK 73145-8000

12. Delivery: CLIN 0001- 20 each per month ARO, CLIN 0002 - 1 each per month

13. IUID: Note to Contractor: If unit price exceeds $5,000 then UID requirements will apply.

14. Buyer name, phone#, and email address: Alexandra Crothers 405-734-4629,  alexandra.crothers@us.af.mil

15. AMC Code:  1/B

This requirement is for the manufacture of the cylinder roller bearing for the F100 engine program.  Sources must be qualified prior to award.  To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements.  The Government is not required to delay contract award to review pending Source Approval Requests (SARs).  Therefore, offerors are encouraged to submit SARs as soon as possible.  If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards.  Additional sources for this item require engineering source approval by the original equipment manufacturer, United Technologies Corporation, DBA: Pratt Whitney Spare Parts Division.  This item is not export controlled.

Currently approved sources:  The Timken Co, FAG Aerospace, Inc., SKF USA, Inc., MPB Corp.

Electronic procedures will be used for this solicitation. IAW FAR 5.207 (c) (15) (ii), all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency.

NOTE:  An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition.  The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel.  When requested, the Ombudsman will maintain strict confidentiality as to source of concern.  The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273.  DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.