Computer and Software for IPF Alameda

Statement of Work

Computer and Software for IPF Alameda

IOD-Compliance

1. GENERAL

1.1 Background

The Coast Guard is seeking to procure an SSD controller retrofit service plus Ballbar calibration for the 2013 M2B, CWJ, with a 30SA pump. Upgraded service and parts are needed to operate current Integrated Water-Jet system located at Industrial Production Facility (IPF) Alameda. IPF Alameda’s current system is degraded, and software is no-longer supported. The current Integrated Water-Jet, model number M2-3120B W/30SA, serial number 120292 will require an upgraded WIN10 embedded computer panel assembly with Flow master STD, PMAC software with a BAS ESL 60 KSI intensifier assembly. Due to excessive cost to replace the waterjet system, refurbishment is required. Waterjet provides precision cutting required by IPF Alameda.

1.2 Scope

The vendor shall provide a hopper retrofit for the computer and upload new software to include the installation of an abrasive transfer system within the current waterjet system. Vendor is responsible for supplying suitable hardware and software capable of returning the current waterjet system back online. Vendor shall ensure that the waterjet is fully operational and test the system before being complete.

1. REQUIREMENTS

1. 1. Supply & Services

Supply required from Flow Shape Technologies Group:

• WIN10 embedded computer panel assembly.
• PMAC Flow master Flow-Software
• 60 KSI BAS Intensifier assembly
• ABR delivery Flow Master Hopper assembly
• Abrasive Transfer System (ATS)
• ATS plumbing kit
• Preform all services needed to remove and install new hardware, update system with new software and test equipment.  

2.2 Delivery Location and POC:

Location USCG IPF Alameda, Alameda CA:

The U.S. Coast Guard IPF Alameda is located at Coast Guard Island, #1 Eagle Rd, Building 15

Alameda, CA 94501.  Arrangements for services shall be made with the General Forman: Scott Vorhees (510) 437-3510.  Delivery times shall be between the hours of 6:00 AM to 2:30 PM local time, Monday through Friday inclusive. 

1. ACCEPTANCE

1. 1. On-site Testing

Waterjet shall be operated through a minimum of three complete cycles of each cutting function required by US Coast Guard IPF Alameda’s needs. If any cycle fails during testing, the defective equipment shall be repaired and retested.

1. PERIOD OF PERFORMANCE

The period of performance is fourteen (14) calendar days from date of contract award. If applicable, award of Optional Item is expected to take place within 3 calendar days of award of base items.

4.1 Contracting Officer’s Representative

COR information will be provided at time of award.