Coat, electrical workers NSN 8415-01-463-4015

The proposed acquisition will result in an Indefinite Delivery Purchase Order (IDPO) and covers a requirement for the item: COAT,ELECTRICAL WORKERS (NSN 8415-01-463-4015)

Approved CAGE - Part Number ; 44NS5

Paramount Corp DBA Oberon Company

TCG40-CT-XL

The award will be issued as a simplified acquisition and the total dollar value will not exceed $250,000 for the total of all delivery orders issued during the two-year base period.  The IDPO may have multiple delivery destinations throughout the continental USA. All deliveries will be FOB Destination and Inspection and Acceptance at Destination. Delivery will be required 45 days after the date of award. All materials used in the fabrication are to be furnished by the successful offeror. It is anticipated this solicitation will be posted to the DLA Internet Bid Board System (DIBBS) on or after March 2023. All offerors MUST be registered in The System for Award Management (SAM) in order to be eligible for award. All responsible sources may submit offers which, if timely received, shall be considered.

Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form.

Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include:

 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process.

 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in The System for Award Management (SAM) system. All Contractors must register on the SAM website:  https://www.sam.gov/portal/public/SAM/ in order to be considered for award.

 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their (SAM) registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance).

Important Note on Foreign Content:

 The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as 'The Berry Amendment') impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and 'specialty metals' (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies.

•           DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns, and drawings on our contracting page. To request technical data for this solicitation use the following link to the DLA Troop Support C&T Technical Data Repository area:

https://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx

COAT,ELECTRICAL WORKERS

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

Part Numbers: TCG40-CT-M  NSN:8415-01-563-4013 TCG40-CT-L

 NSN:8415-01-563-4014 TCG40-CT-XL  NSN:8415-01-563-4015 CAGE: 44NS5 ALL

MATERIALS USED IN THE CONSTRUCTION OF THESE GARMENTS ARE INHERENTLY

FLAME RESISTANT, INCLUDING THE THREAD, THE COATS AND COVERALLS FEATURE

NOMEX SLEEVE CUFFS AND DOUBLE FRONT CLOSURES WITH FR ZIPPER TAPE AND

DUPONT, NOMEX, VELCRO SAFETY FLAP

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C<(>&<)>T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C<(>&<)>T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C<(>&<)>T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST

CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE"

SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-2073-1:

.

NO ADDITIONAL INFORMATION FOLLOWS

(Ref. T0898)

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE

FOLLOWING:

LABEL TAG:  EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG

FOR PERSONAL CLOTHING ITEMS.  THE PAPER USED FOR THE TAGS SHALL BE

STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A

SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING.  THE TAGS

SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.  THE BAR CODING ELEMENT SHALL

BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT

CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC"

MUST APPEAR BENEATH THE CODE.  THE BAR CODES FOR NSN AND UPC SHALL BE A

MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY

VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE

LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED

UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII

(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE

TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

PARAMOUNT CORP. 44NS5 P/N TCG40-CT-L