CNC Equipment Alignment
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- FA8125-21-Q-0014
- Agency
- Air Force Sustainment Center Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
Notice details come from SAM.gov. Updated .
Notice text
The Air Force intends to solicit for the following service:
The Contractor shall provide a one-time repair for the equipment listed within the Equipment List, based upon the findings of the health assessment, to return equipment to original operational specifications. The Contractor shall perform the below listed repair work, calibrate, and realign the equipment listed within the Equipment List.
- OC11144, Cincinnati 30V
- Level and square
- Pitch error compensate all axes
- Adjust slide way bearing gibs for wear
- Reinforce column brace crack
- OC16986, SNK RB200F
- Level and square
- Pitch error compensate all axes
- T/S z-axis ball screw and roller pack due to current fluctuations
- OC18908, SNK FSP80V
- Level and square
- Pitch error compensate all axes
- Replace y axis ball screw and ball nut
- OC18911, SNK CMV150T
- Level and square
- Pitch error compensate all axes
- Tune drives to eliminate scaling mismatch
- OC22299, Starrag Heckert STC1000/130
- Level and square
- Pitch error compensate linear x axis and a/b rotary axes
A Firm Fixed Price type contract is contemplated.
Estimated Period of Performance: 90 days ARO
System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 811310 with a size standard of $8M.
Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through FedBizOps at https://www.fbo.gov/. Notelephone requests. See Note 22. Authority is 10 USC 2304 (c)(1).
For further information contact:
Sheridan Robison,
Contracting Specialist
Notice history
| Notice | Type | Posted |
|---|---|---|
| CNC Equipment Alignment | Award Notice | |
| CNC Equipment Alignment | Solicitation | |
| CNC Equipment Alignment | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity