Clutch Fan, Engine

Contract Specialist: Jennifer Chavez Email: jennifer.chavez@dla.mil

NSN: 2930-01-399-0852

Nomenclature: Clutch Fan, Engine

Set-Aside Type: Unrestricted

FOB: Origin

I/A: Origin

The requirement for NSN 2930-01-399-0852 will be procured under an Indefinite Delivery Contract (IDC) using FAR subpart 15, Contracting by Negotiation. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. A base period of 3 years and two separate 1-year option years with a total duration not to exceed 5 years is anticipated. This item has a Contractor First Article Test Requirement. Deliveries are DLA Direct within 76 days of order if FAT is waived and 240 days if FAT is required. There is one FAT waived source listed below. This solicitation will be issued on an unrestricted basis using other than full and open competition. The approved (FAT Waived) source of supply and the applicable drawing references are listed below:

CRITICAL APPLICATION ITEM

BORGWARNER THERMAL SYSTEMS INC 51377 P/N 1090-09000-01

IAW BASIC DRAWING NR 19207 12421971

REVISION NR D DTD 08/07/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421971

REVISION NR DTD 08/16/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421971

REVISION NR A DTD 11/06/1997

PART PIECE NUMBER:

This NSN is being procured under the First Destination Transportation (FDT) program, and as a result F.O.B. Origin (Government managed freight) and Inspection/Acceptance at Origin is requested. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

The AMC/AMSC for this item is 3B. This means this part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. The Small Business size standard is 1250 employees.

The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of May 22, 2019. Hard copies of this solicitation are not available. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS.

DLA Internet Bid Board System (DIBBS) proposals are not acceptable for this solicitation. Offerors must complete the entire solicitation. Proposals must be submitted on a hard copy of the Request for Proposal (RFP), scanned, and emailed to Jennifer.Chavez@dla.mil.

While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, past performance, and other factors as identified in the solicitation.

Shipping instructions shall be provided with individual delivery orders. Material ordered under the terms of this contract shall be delivered within 76 days after the date of the order. Notwithstanding any other provisions/clauses of this contract, no deliveries shall be made prior to issuance of delivery order (DD Form 1155).

.

Contract Specialist: Jennifer Chavez Email: jennifer.chavez@dla.mil

NSN: 2930-01-399-0852

Nomenclature: Clutch Fan, Engine

Set-Aside Type: Unrestricted

FOB: Origin

I/A: Origin

The requirement for NSN 2930-01-399-0852 will be procured under an Indefinite Delivery Contract (IDC) using FAR subpart 15, Contracting by Negotiation. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. A base period of 3 years and two separate 1-year option years with a total duration not to exceed 5 years is anticipated. This item has a Contractor First Article Test Requirement. Deliveries are DLA Direct within 76 days of order if FAT is waived and 240 days if FAT is required. There is one FAT waived source listed below. This solicitation will be issued on an unrestricted basis using other than full and open competition. The approved (FAT Waived) source of supply and the applicable drawing references are listed below:

CRITICAL APPLICATION ITEM

BORGWARNER THERMAL SYSTEMS INC 51377 P/N 1090-09000-01

IAW BASIC DRAWING NR 19207 12421971

REVISION NR D DTD 08/07/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421971

REVISION NR DTD 08/16/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421971

REVISION NR A DTD 11/06/1997

PART PIECE NUMBER:

This NSN is being procured under the First Destination Transportation (FDT) program, and as a result F.O.B. Origin (Government managed freight) and Inspection/Acceptance at Origin is requested. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

The AMC/AMSC for this item is 3B. This means this part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. The Small Business size standard is 1250 employees.

The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: https://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.

The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/rfp on or about the issue date of February 25, 2019. Hard copies of this solicitation are not available. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS.

DLA Internet Bid Board System (DIBBS) proposals are not acceptable for this solicitation. Offerors must complete the entire solicitation. Proposals must be submitted on a hard copy of the Request for Proposal (RFP), scanned, and emailed to Jennifer.Chavez@dla.mil.

While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, and past performance as identified in the solicitation.

Shipping instructions shall be provided with individual delivery orders. Material ordered under the terms of this contract shall be delivered within 76 days after the date of the order. Notwithstanding any other provisions/clauses of this contract, no deliveries shall be made prior to issuance of delivery order (DD Form 1155).

.