Chain hoist

The Defense Logistics Agency (DLA) Maritime Contracting Office at Norfolk Naval Shipyard has a requirement for Brand Name (JDN PROFI) or equal of the following:

QTY 5- EA: 1 TON PROFI AIR HOIST W/ 80 FT LIFT W/30 FI CONTROL PENDANT

Brand: ProfI

Model:  CB

Capacity: 1 Ton

Load Chain Length: 80 ft.

Hand Chain Length: 

Quantity: 5

5.10.1 Manual and powered portable hoists must conform to ASME B30.

5.10.4 All Hand Chain Manually Operated Chain Hoist (Chain falls) must meet the requirements of ASME Performance Standard for Hand Chain Manually Operated Chain Hoist – HST-2

5.10.6. All air chain hoist must meet the requirements of ASME Performance Standard for Air Chain Hoist – HST -5

Certificate Requirement:

-A Certificate of Compliance stating compliance with the applicable ASME B30 Volume stated above. Ensure load (proof) test certification documents indicate the actual load test and test duration

QTY 5 EA: 2 TON PROFI AIR HOIST W/ 80 FT LIFT W/30 FI CONTROL PENDANT

Brand: ProfI

Model:  CB

Capacity: 2 Ton

Load Chain Length: 80 ft.

Hand Chain Length: 

Quantity: 5

5.10.1 Manual and powered portable hoists must conform to ASME B30.

5.10.4 All Hand Chain Manually Operated Chain Hoist (Chain falls) must meet the requirements of ASME Performance Standard for Hand Chain Manually Operated Chain Hoist – HST-2

5.10.6. All air chain hoist must meet the requirements of ASME Performance Standard for Air Chain Hoist – HST -5

Certificate Requirement:

-A Certificate of Compliance stating compliance with the applicable ASME B30 Volume stated above. Ensure load (proof) test certification documents indicate the actual load test and test duration

QTY 5 EA: 2 TON PROFI AIR HOIST W/ 80 FT LIFT W/30 FI CONTROL PENDANT

Brand: ProfI

Model:  CB

Capacity: 2 Ton

Load Chain Length: 80 ft.

Hand Chain Length: 

Quantity: 5

5.10.1 Manual and powered portable hoists must conform to ASME B30.

5.10.4 All Hand Chain Manually Operated Chain Hoist (Chain falls) must meet the requirements of ASME Performance Standard for Hand Chain Manually Operated Chain Hoist – HST-2

5.10.6. All air chain hoist must meet the requirements of ASME Performance Standard for Air Chain Hoist – HST -5

Certificate Requirement:

-A Certificate of Compliance stating compliance with the applicable ASME B30 Volume stated above. Ensure load (proof) test certification documents indicate the actual load test and test duration

Procurement will be a total small business set-aside. The NAICS Codes for this procurement is 333923. Award will be made on the basis of lowest-price, technically acceptable. Ensure the solicitation number is included in the subject line of any email correspondence. Emails without subject lines will not be read due to security issues. By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.

The solicitation is expected to be posted on or around 12 August 2020.

Quotations must include:

1. A signed copy of the solicitation, to include the total price of each CLIN and the filled‐in Representations and Certifications.

2. If applicable, executed copies of all amendments.

3. If applicable, shipping charges

4. Vendor Address, Point of Contact, Telephone Number, CAGE Code & Tax ID

Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.beta.sam.gov, as this office no longer issues hard-copy solicitations.