Cable and reel assy

Added: Mar 24, 2017 8:50 am

CABLE AND REEL ASSY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) theycan also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. 

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN (End of STO)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES (End of STO)

ALRE CSI
2100FT = REEL
1 RL = 2,100 FT
P/N 524630-2 MOD is a SPECIAL ORDER CABLE the length is to be 2100 FEET LONG. 

**MRI INSPECTION REQUIRED***

This NSN requires MATERIAL RECEIPT INSPECTION (MRI) at NAVAIR LKE prior to Final Delivery. Please Include Production Testing Inspection Report and required material certification package with parts. If parts must be shipped individually, please Include Production Testing Inspection Report and required material certification package with each part.

Please ship parts to:
NAVAIR
CODE 4.8.8.8 / BLDG. 148-1
HWY 547
JOINT BASE MDL, NJ 08733
ATTN: Branko Turcich
MRI Inspection Required for this contract.

THE FOLLOWING DRAWINGS AND DOCUMENTS APPLY TO THIS NSN:
DWG-80020-524630 REV E
DWG-80020-524631 REV E
DWG-80020-A92791 REV 45
DWG-80020-508056 REV R
DWG-80020-421404 REV R
DWG-80020-323822 REV T
DWG-80020-323182 REV F
DWG-80020-419442 REV G
DWG-16236-CN014510841 (REV A)
QAP-16236-SQAP014510841QA (REV A)
QAP-16236-SQAP014510841GFAT (REV A)
QAP-16236-SQAP014510841PLT (REV A)
QAP-80020-CDRL-1512110(A)COQC
QAP-80020-CDRL-1512110(A)GFAT
QAP-80020-CDRL-1512110(A)MP
QAP-80020-CDRL-1512110(A)PTI
QAP-80020-CDRL-1512110Q(A)PLT

THD-TDR-15-12110A (GOVT ONLY/ EXPIRES: 11/01/17 AUTH FOR ONE MORE YEAR)

THE First Article Test (FAT) CLIN has been waived.

PCO MANDATORY INSPECTION. DURING PRODUCTION, MANDATORY INSPECTION IS REQUIRED TO BE ACCOMPLISHED AND DOCUMENTED BY THE CONTRACTOR AS FOLLOWS:

CRITICAL AND MAJOR CHARACTERISTICS AS IDENTIFIED IN CLASSIFICATION OF CHARACTERISTICS BLOCK ON DRAWING(S), TECHNICAL SPECIFICATIONS, SECOND TIER DOCUMENTS REFERENCED IN THE ACQUISITION ITEM DESCRIPTION AND SPECIFIED IN THE PROCUREMENT DOCUMENT, AND CHARACTERISTICS DEFINED AS:

(A) MATERIAL CERTIFICATIONS
(B) DESTRUCTIVE AND / OR NONDESTRUCTIVE TEST RESULTS (WHEN APPLICABLE)
(C) ATTRIBUTES FOR PLATING HARDNESS

IMPORTANT MINOR CHARACTERISTICS SHALL BE DEFINED BY THE CONTRACTOR SUBJECT TO QAR CONCURRENCE, UNLESS OTHERWISE DEFINED ON APPLICABLE DRAWING(S), SPECIFICATIONS AND CHARRACTERISTICS DEFINED AS:

(A) DIAMETRICAL AND LINEAR DIMENSIONS HAVING A TOLERANCE OF +/- 0.005 INCH OR LESS

(B) GEOMETRIC FEATURE CONTROLS HAVING A TOTAL TOLERANCE OF 0.003 INCH OR LESS

(C) SURFACE FINISHES HAVING A 16 VALUE OR LESS

(D) CLASS THREE THREADS

(E) ANGULAR TOLERANCES WITH A TOTAL RANGE LESS THAN 1 DEGREE LEVEL OF INSPECTION: ANSI / ASQC Z1.4 FOR SINGLE SAMPLING USING A GENERAL INSPECTION LEVEL O II

(A) CRITICAL AND MAJOR CHARACTERISTICS: 100% INSPECTION APPLIES

(B) IMPORTANT MINOR CHARACTERISTICS: AQL OF 1.5 CERTIFICATION / DATA REPORTS: THE CONTRACTOR IS RESPONSIBLE FOR PREPARING A CERTIFICATE OF QUALITY COMPLIANCE (COQC) IN ACCORDANCE WITH THE DD FORM 1423 CONTRACT DATA REQUIREMENTS LIST (CDRL). THE COQC CONTENT WILL INCLUDE AS A MINIMUM THE DATA DESCRIBED IN DLAD CLAUSE 52.246-9000, IN ADDITION TO ALL PCO MANDATORY INSPECTION RESULTS. THIS COQC REQUIREMENT APPLIES TO EACH UNIT OF CONTRACT QUANTITY. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REMINDER: THIS IS A CRITICAL ITEM AND ALL MAJOR AND MINOR WAIVER/DEVIATION REQUESTS MUST BE FORWARDED TO THE DSCC CONTRACTING OFFICER WHO WILL COORDINATE THE REVIEW AND APPROVAL THROUGH THE RESPONSIBLE ENGINEERING SERVICE ACTIVITY.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH & RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA DRAWINGS PROVIDED. 

BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.

If this NSN provides Contract Data Requirement Lists (CDRLs) as part of the Technical Data Package, the line items from this solicitation are not to be separately priced. Offerors must factor into the end item unit price all costs associated with the preparation and delivery of the data deliverables in the contract.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT.

EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. (February 2016)

SURPLUS IS NOT ACCEPTABLE FOR THIS NSN

CRITICAL APPLICATION ITEM

WIRECO WORLDGROUP INC. 80967 P/N 524631-2
INDUSTRIES DE CABLES DACIER LTEE 35043 P/N 524631-2
WIREROPE WORKS INC 77141 P/N 524631-2

IAW REFERENCE DRAWING NR 80020 323182
REVISION NR F DTD 09/14/1998
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 524630
REVISION NR E DTD 11/14/2014
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 508056
REVISION NR R DTD 03/28/2008
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 524631
REVISION NR E DTD 11/14/2014
PART PIECE NUMBER: 524631-2

IAW REFERENCE DRAWING NR 80020 323822
REVISION NR T DTD 02/12/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 421404
REVISION NR R DTD 02/29/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 80020 A92791
REVISION NR 45 DTD 04/02/2012
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 CN014510841
REVISION NR A DTD 08/31/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-16188
REVISION NR DTD 08/05/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP014510841QA
REVISION NR A DTD 08/31/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL15-12110(A)COQC
REVISION NR DTD 08/08/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL15-12110(A)PTI
REVISION NR DTD 08/08/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP014510841GFAT
REVISION NR A DTD 08/31/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL15-12110(A)PLT
REVISION NR DTD 08/08/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL15-12110(A)MP
REVISION NR DTD 08/08/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP014510841PLT
REVISION NR A DTD 08/31/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL15-12110(A)FAT
REVISION NR DTD 08/08/2016
PART PIECE NUMBER:

The shipping requirements are as follows:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2001 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US

For transportation assistance see DLAD 52.247-9034.

The packaging requirements are as follows:
PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP: 001 PRES MTHD: 10 CLNG/DRY: 1 PRESV MAT: 00
WRAP MAT: 00 CUSH/DUNN MAT: AD CUSH/DUNN THKNESS: M
UNIT CONT: F2 OPI: M
PACK CODE: U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE: ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. (February 2016)

Quantity: 24

Unit of Issue: RL

Destination Information: Destination

Delivery Schedule:  Every 30 days beginning 5 RL at 250 days, 5 RL at 280 days, 5 RL at 310 days, 5 RL at 340 days, and the remaining 4 RL at 370 days.