Air Hose

The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 326220 Rubber and Plastics Hoses and Belting Manufacturing. This requirement will be set aside as a 100% Small Business concern.

The Contract Line Items (CLINs) are as follows.

0001 108 Assembly

N4215811896002

FFP

HOSE ASSEMBLY

NSN: 4720-LL-L95-0100

COG: 9B

ITEM NAME: HOSE, ASSEMBLY, AIR SERVICE, 2"

ORDERING DATA:

• 2" HOSE ASSEMBLY (2.00" ID x 2.625" OD) x 50’ LENGTH (+/- 12"),

(WALL THICKNESS SHALL BE 0.3125 " MINIMUM.)

• WORKING PRESSURE TO BE 150 PSI MINIMUM

• CONSTRUCTION TO BE SYNTHETIC RUBBER INNER TUBE,

REINFORCED WITH SYNTHETIC HIGH STRENGTH TEXTILE YARN, AND

A SYNTHETIC RUBBER COVER. THE COVER COLOR SHALL BE RED

AND SHALL NOT CONTAIN ANY COLOR CONTAINING YELLOW OR

MAGENTA SHADES.

• COVER TO BE MILD ACID AND OIL RESISTANT

• END FITTINGS TO BE PERMANENTLY ATTACHED AND ARE TO BE

ALL BRASS AND/OR STAINLESS STEEL ONLY.

• END FITTINGS TO BE SWAGE TYPE x 2" MALE NOMINAL PIPE

THREAD.

• HANSEN QUICK CONNECT COUPLING PART NUMBER B16-T51 (PLUG),

"OR EQUAL" TO BE INSTALLED ON ONE END OF THE HOSE ASSEMBLY

AND HANSEN QUICK CONNECT COUPLING PART NUMBER B16-S-51-SL

(SOCKET), "OR EQUAL" TO BE INSTALLED ON THE OPPOSITE END.

THESE FITTNGS ARE TO BE ALL BRASS AND/OR STAINLESS STEEL

ONLY.

• A SAFETY CABLE EQUAL TO "DIXON" STYLE "W" WHIPCHECK IS TO

BE PERMANENTLY ATTACHED BEHIND THE SHOULDER ON THE MALE

END OF THE HOSE ASSEMBLY. THIS PERMANENT ATTACHMENT

METHOD IS TO BE DONE VIA CRIMPING.

• EACH HOSE ASSY. SHALL HAVE A LAYLINE CONTAINING, AT A

MINIMUM, MANUFACTURERS NAME, WORKING PRESSURE AND

REQUISITION NUMBER. MARKINGS SHALL CONSISTOF MINIMUM 1/2"

HIGH WHITE LETTERS IN INDELIBLE INK.

• EACH COMPLETED HOSE ASSEMBLY SHALL BE HYDROSTATICALLY

TESTED TO THE MINIMUM WORKING PRESSURE OF THE HOSE BEING

SUPPLIED AND HELD FOR 30 MINUTES WITH ZERO LEAKAGE

ALLOWED.

• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT EACH

HOSE ASSEMBLY (HOSE AND FITTINGS) HAS BEEN

HYDROSTATICALLY TESTED AT (MINIMUM WORKING PRESSURE OF

THE HOSE BEING SUPPLIED FOR 30 MINUTES WITH ZERO LEAKS

AND/OR BULGES.) A COPY OF THIS CERTIFICATION IS TO BE SENT TO

CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO

BE FILED WITH THE CONTRACT.

• AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD

RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR

TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS

DURING THE EVALUATION PROCESS.

• HOSES MUST BE PALLETIZED

FOB: Destination

NSN: 4720-LL-L95-0100

MILSTRIP: N4215811896002

SPMYM121Q0107

PURCHASE REQUEST NUMBER: N4215811896002

PROJECT: 606

PSC CD: 4720

This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM121Q0107 and it is expected to be posted on or about 13 August 2021 and posted in SAM, https://.sam.gov/. Quotes will be due by 12:00 pm EST on 17 August, 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM121Q0107) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues.

Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://.sam.gov/

By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.