6520--FY24_Dental Vacuum Equipment Replacement
Closed Pre-Solicitation Posted
A newer solicitation was posted. See the latest solicitation from .
- Solicitation number
- 36C24824Q1182
- Agency
- Veterans Integrated Service Network 8 Veterans Health Administration, Department of Veterans Affairs
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 339114 Dental Equipment and Supplies Manufacturing
- Points of contact
-
- Benjamin Amato benjamin.amato@va.gov (407) 646-4005
Notice details come from SAM.gov. Updated .
About this opportunity
Paragraph 1:
The Department of Veterans Affairs Veterans Health Administration, through Veterans Integrated Service Network 8, is seeking to procure the replacement of the Dental Vacuum Systems at the Lake Nona Campus of the Orlando VA Healthcare System. The requirement is for a Dental Vacuum System-ECO DRY-VAC VACUUM SYSTEM DUAL MOTOR, with specific technical specifications including 2 x 20 HP regenerative type vacuum producers, 460-volt 3 phase power, and the ability to support 32 chairs independently. The system must be compliant with ADA standards. The solicitation number is 36C24824Q1182, with a response due date of June 21, 2024 by 1:00 PM Eastern Time.
Paragraph 2:
This procurement is set aside for small businesses. The NAICS code is 339114 - Dental Equipment and Supplies Manufacturing, and the PSC is 6520 - Dental Instruments, Equipment, And Supplies. No potential incumbents or current contractors are mentioned. The pre-solicitation notice does not provide any information about award values or budget ranges.
Notice text
The Orlando VA Healthcare System requires the replacement of the Dental Vacuum Systems at the Lake Nona Campus.
Brand Name or Equal Description:
Dental Vacuum System-ECO DRY-VAC VACUUM SYSTEM DUAL MOTOR
2 x 20 HP Regenerative type vacuum producers skid mounted (or equivalent)
Motors are TEFC 2 pole 3 phase CSA approved.
460-volt 3 phase power.
Each motor produces 480 CFM @ 8" of mercury vacuum at 3450 RPM
Variable frequency drives on each motor. These control the vacuum level which greatly reduces electrical usage.
Compact design dimensions are 48" wide x 40" deep for the vacuum pumps Skid mounted, vacuum weighs 1500 LBS or less.
Must be able to support 32 chairs independently.
Each motor has an inline check valve to allow operation of each motor separately or in tandem.
Must fit on provided equipment pad. Dimensions are as follows:
- 82 inches long
- 57 inches wide
Motor control panel is mounted on the skid with the vacuum motors. It is all prewired and fully tested.
Units must be able to be individually serviced. And capable of operating independently.
System must be compliant with all current ADA (American Dental Association) standards
Attachments
| File | Type | Posted |
|---|---|---|
| 36C24824Q1182_1.docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| 6520--FY24_Dental Vacuum Equipment Replacement | Solicitation | |
| 6520--FY24_Dental Vacuum Equipment Replacement | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity