3D Printer using fused filament fabrication

General Overview:
With the increasing complexity of work and shorter time frames to complete work orders, the ability to easily upload files into a 3D printer to create parts faster than traditional methods of machining is highly desirable. Not only does AFIT need fast parts, but parts that can meet or exceed the strength and weight of aluminum, without the hazards of powder metal printing machines. This is not only a time and money-saving venture, but this is also a force multiplier. A single employee can upload files, start the 3D printer, then walk away and complete other work orders as the printer is working.

Minimum Requirements:
Shall meet the following basic system requirements:

1. Build volume must be at least 12” x 10” x 7”
2. Shall be able to print 50 μm layers at minimum
3. Shall be able to create parts using fused filament fabrication, AND Continuous Filament Fabrication
4. Shall be able to print fibrous materials to include: carbon fiber, fiberglass, Kevlar ®, HSHT fiberglass
5. Shall be able to print parts with multiple types of plastics to include: Onyx, Onyx FR, Nylon White
6. Shall include in-process inspection laser scanning, active print calibration, and bed leveling
7. Shall be powered by 120 VAC
8. Shall have a footprint no bigger than 24” x 20”x 36”
9. Shall not weigh more than 120 pounds

See attachment AFIT SOW 3D Printer for full description.