2015 Berenda/Kingston Fence

Added: Jun 01, 2015 5:26 pm This contract is to acquire services for approximately 1.5 miles of fence reconstruction. The construction will be between two separate project locations, 1 mile on the Kingston Allotment and .5 miles on the Berenda Allotment. The 1.5 miles of fence will be a 4 strand barbed wire fence. The fence must meet Forest Service standards and specifications as outlined in this document. Designated gate locations will be identified for wire gate or pipe gate installation. The fence right of way will be identified by the existing fence and will be cleared eight foot on each side of the fence for a sixteen foot right of way. The old existing fence material (barbed wire, smooth wire, t-posts, and brace posts) that are to be replaced will need to be removed and properly disposed of by the contractor completing the work on the ground. Off road travel will be assessed and authorized on a case-by-case basis by COR and District Ranger. Due to topography and location, more brace posts than usual may be required and packing of materials to and from the job site will be required. The majority of fence material will be Government furnished material.

There are no cultural resource sites located within the project area.