1305--Ammunition -

Training Ammunition Scope of Work

Background:

The VA Police service provides law enforcement, protective and investigative services to the U.S. Department of Veteran Affairs facilities and properties. Current VA training requirements require every armed VA Police officer to train quarterly to maintain weapons proficiency. VA Police are currently authorized to carry the following handguns:

Sig Sauer 229R DAK in 9mm

Sig Sauer 239 DAK in 9mm

Berretta 92D in 9mm

The VA Police will require the vender to deliver a total of 150,000 rounds of 124 grain, 9mm full metal jacketed (FMJ) training ammo to our VISN s eight duty stations located throughout New England. The ammunition should be packaged in 1000 round cases of 50 round, boxes. Bagged ammo is not permitted. Training ammunition for the service handgun will be 124 grain full metal jacketed (FMJ). . Service handgun training ammunition may be of any brand, as long as it is produced by a reputable manufacturer and meets the Sporting Arms and Ammunition Manufacturers Institute specifications. Reloaded ammunition is not authorized.

All ammunition must be current production verified by lot number through the manufacturer. The vendor must guarantee that all ammunition sold has been stored under manufacturer-recommended conditions to protect the integrity of the product.

The projectile design shall not require a clean barrel to be seasoned by the firing of fouling shots to achieve optimal accuracy. If any type of surface coating is applied to the projectile, it shall not wear off or transfer under normal handling and/ or storage (inside a pocket, etc.).

The bullet pull force will be sufficient so as not to dislodge the projectile from its seated position in a previously un-chambered cartridge during recoil (when contained in the magazine) or when feeding/chambering in the VA Approved weapons listed.

The manufacturers shall certify that the warrant that the projectile designs are compatible with all listed VA Approved weapons and will not cause abnormal wear or damage to any components of these weapons.

.

Ammunition shall consist of production ammunition offered by the manufacturer.

No component of ammunition shall have been used previously. Reloaded

ammunition is unacceptable.

Vendor shall be capable of -providing the entire quantity of ammunition within the required time frames.

Vendor shall ensure that all applicable laws have been complied with concerning construction, packaging, labeling, registration, and transporting.

The vendor shall not make any unannounced alterations to the ammunition design or components, including powder, primer, cartridge case, projectile, or suppliers, without prior notification and written approval by the COR.

In the event of ammunition failure, findings of failure analysis will be reported to the vendor in writing, within 5 business days. Concerning the findings, remedial action may be required to be taken by the vendor to, replace the defective product if warranted. Findings of failure shall be reported to the manufacturer.

The breakdown of the total 150,000 rounds is as follows:

Bedford MA

70 cases

Boston MA

25 cases

Central Western Mass

56 cases

VA Connecticut

89 cases

Providence RI

60 cases

White River Junction VT

39 cases

Manchester NH

36 cases

Togus Maine

34 cases

TOTAL: 409 CASES

DELIVERY LOCATIONS/POC s

Facility

Mailing address

Chief Supply Chain Officer

689 - VA Connecticut

950 Campbell Ave, West Haven CT 06516

Gary Boucher

608- Manchester NH

718 Smyth Road Manchester ,NH 03104

Michael Casey

405 - White River Jct

215 North Main St, White River Jct, VT 05001

Trevor McCants

650-Providence RI

830 Chalkstone Ave Providence RI 02908

Steven Francis

518 - Bedford

200 Springs Road, Bedford MA 01730

John Mchale

631-VA CWM

421 N Main Street Leeds MA 01062

Suzanne Krafft

402 - Togus

1 VA Center, Augusta, ME 04330

Rob Coro

523A - VA Brocton, MA

940 Belmont Street, Brockton, MA 02301

Cheryl Hayes-Montville