12 - Periscope, Armored Vehicle

The response date referenced is estimated. Issue date is on or around 2/11/2019, with the Response date on or around 3/15/2019. Note: Copies of this solicitation will only be available via the World Wide Web approximately 15 days after this notice is published (solicitation should be posted on or around 2/11/2019). The DSCC Website address (URL) is https://www.dibbs.bsm.dla.mil/RFP/. Hard copies of the solicitation and any applicable drawings (if available) can be downloaded at this website. Purchase request number: 0077344655, NSN: 1240-01-390-4980, Nomenclature: Periscope, Armored Vehicle.

Item is to be manufactured IAW:

IAW BASIC DRAWING NR 19200 12548774
REVISION NR M DTD 05/17/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12387279
REVISION NR A DTD 01/27/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7680606
REVISION NR AB DTD 04/19/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607
REVISION NR C DTD 08/04/2009
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12297953
REVISION NR A DTD 01/22/2018
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548768
REVISION NR A DTD 08/30/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344344
REVISION NR K DTD 05/25/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 ATPD-2167
REVISION NR A DTD 09/06/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285860
REVISION NR E DTD 08/07/2008
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12285860
REVISION NR L DTD 08/08/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7641866
REVISION NR V DTD 04/19/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285860
REVISION NR G DTD 05/15/2014
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12344343
REVISION NR J DTD 06/24/2015
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548779
REVISION NR H DTD 08/29/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344343
REVISION NR M DTD 02/26/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548772
REVISION NR G DTD 10/20/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548773
REVISION NR B DTD 09/19/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549807
REVISION NR A DTD 03/28/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549146
REVISION NR A DTD 03/27/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12918300
REVISION NR A DTD 06/28/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548771
REVISION NR H DTD 10/20/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549136
REVISION NR G DTD 03/27/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548769
REVISION NR D DTD 10/20/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548770
REVISION NR A DTD 09/06/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548774
REVISION NR DTD 04/09/2018
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12473000
REVISION NR B DTD 06/26/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548767
REVISION NR A DTD 07/14/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548774
REVISION NR DTD 02/21/2002
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12549747
REVISION NR B DTD 08/30/2016
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12931825
REVISION NR C DTD 10/21/2016
PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12548771
REVISION NR J DTD 10/28/2015
PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12548772
REVISION NR F DTD 10/28/2015
PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12548773
REVISION NR B DTD 10/28/2015
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01417 SC-X17343
REVISION NR D DTD 12/09/2015
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12548769
REVISION NR D DTD 03/31/2017
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12285860
REVISION NR D DTD 04/18/2002
PART PIECE NUMBER:

Contractor First Article Testing Applies. First Article Testing Applies to all non-waived, non-approved sources. Currently waived sources for FAT are: Meopta USA (66083), and General Dynamics (01417).

CONTRACTOR FIRST ARTICLE TEST (CFAT) IS REQUIRED

SAMPLE SIZE SHALL CONSIST OF 2 PERISCOPES.

THE CONTRACTOR WILL NOTIFY DCMA REPRESENTATIVES 15 DAYS PRIOR TO START
OF TESTS.

THE CFAT WILL BE DUE BY 120 DAYS FROM CONTRACT AWARD. A TEST REPORT IS
REQUIRED AT THIS TIME FOR DCMA QAR REVIEW.

THE GOVERNMENT HAS 30 DAYS TO REVIEW THE TEST RESULTS.

THE SAMPLES WILL NOT BE PART OF THE PRODUCTION QUANTITY AND WILL NOT BE
USED AS A MANUFACTURING STANDARD.

A PRETEST REPORT IS NOT REQUIRED.

THE CONTRACTOR IS REQUIRED TO PERFORM ALL OTHER TESTS AS REQUIRED BY
SPECIFICATIONS ATPD-2167 AND SC-X17343D.

A TEST REPORT IS REQUIRED FOR ALL UNWAIVED CFAT SOURCES.

Procurement Note H07 Supply Assurance through Multisource Contracting (SEP 2017) applies to this solicitation.

The solicitation will be posted on or around 2/11/2019 via our website, https://www.dibbs.bsm.dla.mil/RFP/. Total quantity of the PR is for 779 units, with all 779 units being shipped to Red River, TX. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies and services. However, interested persons may identify to the contracting officer their interests and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All responsible sources may submit an offer/quote which shall be considered. For any questions about this, please contact the buyer by e-mail at: brian.maxwell@dla.mil

.