2_-_SOW-GMTK.PDF

STATEMENT OF WORK (SOW) FOR SUPPLIES

ILLINOIS ARMY NATIONAL GUARD (ILARNG) G4

DATE: 20190711

TITLE: Kit, Tool General Mechanics: IL-MT-07 SN - MC8011

1. PURPOSE. To supply maintenance facilities with an adequate amount tool kits in order to perform daily maintenance operations throughout the state.

2. SCOPE OF WORK. The contractor shall provide all materials and support necessary to meet the required specifications for the fully equipped general mechanics tool kits.

3. DELIVERY LOCATION AND DELIVERY DATE. This equipment shall be delivered to the Illinois National Guard Warehouse, Building 03, located at Camp Lincoln, 1301 N.

MacArthur Blvd., Springfield, Illinois 62702-2317 no later than 160 days after award.

4. QUANTITY REQUIRED: 17 each.

5. SPECIFICATIONS REQUIRED.

5.1 SnapOn General Mechanic Tool Kit (KRA5311FPBO) includes the following tools:

Part No. Description Qty

5.2 Specification 1: Wrenches must be constructed from chrome nickel molbdenum boron stele, with minimum Rockwell Hardness of 52, box ends with 7.5 degree offset broaching, open ends with flank drive.

5.3 Specification 2: Ratchets must be constructed from chrome nickel molbdenum boron stele, with minimum Rockwell Hardness of 52; dual paw.

5.4 Specification 3: Screwdrivers must be constructed from shock resistant tool steel, with minimum Rockwell Hardness of 57, cold forged shank, hexagon bolster, and long tri-lobe handle.

5.5 Specification 4: Sockets must be constructed from chrome nickel molbdenum boron stele, with minimum Rockwell Hardness of 52; concentric thin wall broaching, extra deep broach depth, and flank drive.

5.6 Specification 5: Chisels/Punches must be constructed from shock resistant tool steel, with minimum Rockwell Hardness of 57, parabolic curve and hex bar stock.

5.7 Specification 6: Ratchet adapter must be constructed from chrome nickel molbdenum boron stele, with minimum Rockwell Hardness of 52; 20 tooth 18 degree swing arc, and dual paw.

5.8 Specification 7: Pick/Awls must be constructed from shock resistant tool steel, with minimum Rockwell Hardness of 57, cold forged shank and long tri-lobe handle.

5.9 Specification 8: Tape FOD (Foreign Object Damage) 12' Tape Measure.

5.10 Specification 9: Bits must be constructed from shock resistant tool steel, with minimum Rockwell Hardness of 57, and cold forged.

5.11 Specification 10: Tool Box Lock N Roll system which prevents drawers from drifting open during unit movement, 2" inch mounting centers which provide maximum drawer arrangement flexibility, ball bearing drawer slides with 227 lb capacity per drawer, double wall construction and corner gussets for extra strength and rigidity, reinforced 14-gauge bottom channels, standing seam, rolled safety edge that prevents racking and tears in the metal, and ISO-Ride+® heavy-duty torsion spring casters which absorb impact and dampen vibration.

5.12 Specification 11: Wire Twist Pliers designed for simple operation with a one-handed locking function, spring-loaded handles which automatically open when lock is released, jaw tips designed for precision work and hard to reach areas.

5.13 Specification 12: Files must be constructed from shock resistant tool steel with a minimum Rockwell Hardness of 57.

5.14 Specification 13: Pliers must be constructed from shock resistant tool steel with a minimum Rockwell Hardness of 57, cold forged, and talon grip diamond serration.

5.15 Specification 14: Cutters must be constructed from shock resistant tool steel with a minimum Rockwell Hardness of 57, cold forged, vector edge, and cushioned handle.

5.16 Specification 15: Wire brush must be constructed of carbon steel bristles.

5.17 Specification 16: Snips which cut 18ga cold rolled steel, Hot Drop Forged blades which remain sharp, bottom blade is serrated in order to grip material

5.18 Specification 17: Torque Wrench must be accurate to ±4% clockwise and ±6% counterclockwise from 20% to 100% of full scale, Snap-on® high strength sealed ratchet head, sealed ratchet head which keeps out dirt and moisture while being virtually maintenance-free, torque instrument must be calibrated at the factory, is certified to meet the accuracy specified in ASME® and was calibrated on a torque standard traceable to the National Institute of Standards Technology (NIST®), minimal friction “Hour Glass” cam which minimizes friction due to reduced contact area between the cam and internal tube wall. Easy to read laser etched scale.

5.19 Specification 18: Magnetic Pick-up that lifts a minimum of 2 lbs, minimum length of 16 ¾” long and extends to 26 ¾”; aluminum head and the probe O.D. is ½”.

5.20 Lifetime warranty for materials and workmanship of all none consumable tools and tool boxes.

5.21 Lifetime warranty tools/tool boxes must be processed/delivered at end user site.

5.22 Limited warranty tools (consumable tools) must be processed/delivered at end user site.

5.23 Delivery within 90 days of contract acceptance.

6. FOAM SHADOW LINED TOOL BOX DRAWER SPECIFICATIONS REQUIRED.

6.1 Each tool box and tool box drawer will be provided foam cut outs that shadow individual tools that are placed/assigned to that specific drawer. The foam shadow lining will meet aviation maintenance standards.

6.2 The tool box drawers will be constructed of foam and the cut out will be of a gray or black colored foam material. The bottom will be constructed of a foam material with contrasting color.

6.3 Each individual tool will have a cut out provided.

6.4 Spare tool box drawers do not require foam shadow lining.

7. TOOL ETCHING SPECIFICATIONS REQUIRED.

7.1 Each individual tool will be etched to identify/account for the tool box assigned to and the tool number assigned to the specific tool box; not to exceed 12 characters.

END