APX7500_Salient_Characteristics(Attachment_1).pdf

SALIENT CHARACTERISTICS

Electronic Proving Ground, Ft. Huachuca, AZ Land Mobile Radio (LMR) Network Upgrade

1. Description: The Electronic Proving Ground (EPG) at Fort Huachuca has a requirement to upgrade its existing UHF Land Mobile Radio and Repeater network that provides safety of life (SOL) and command & control (C2) support throughout southern Arizona.

2. Background: The EPG LMR capability is provided via the Fort Huachuca Motorola v7.7 LMR system.

3. Requirements and Specifications: The Contractor will provide 4 Mobile UHF radios that meet the specifications below. The mobile radios must meet specifications listed in paragraph 4.

To maintain interoperability with the Fort Huachuca Motorola v7.7 LMR the system and systems at various temporary duty (TDY) locations the vendor solution must:

Be Federal Communication Commission Certified [FCC Declaration of Conformity]

Be spectrum certified by the Department of Defense [DoDI 5000.02/DoDI 4650.01]

Be interoperable to APCO and Telecommunications Industry Association (TIA) P25 Standard

Be narrowband (12.5 KHz) capable

Be compatible with, and be able to trunk on Motorola System v7.7, SmartZone

Seamlessly communicate in the following radio bands: 406-420 MHz

Support advanced hardware key/system key USB-Dongle for code plug and radio system authorization

Support emergency call/alarm ‘Red Button’ functions

Support 3600/9600 baud trunking

Meet MIL-STD-810 C, D, E, F & G

Support talk group scanning

4. Equipment Requested: The Contractor shall provide the following units.

a. REQUESTED BRAND-NAME, OR EQUAL, IS ACCEPTABLE.

b. If a contractor’s proposal included a product other than that specified in the specification, then the contractor must submit technical specifications (which must meet the salient specification listed below each requirement), cut sheets, and other product details, including pictures and brochures of the equipment that is being proposed. Any technical information, brochures and/or pictures must be included with a contractor’s offer

The components that will fall under this purchase are:

Production Description Quantity

APX7500 Consolette UHF R1 MP 4 ADD: AC Line Cord US 4 ADD: P25 Trunking Software 4 ENH: SMARTZONE Operation APX 4 ADD: 3 Year Service From The Start Lite 4 ADD: ASTRO Digital CAI Operation 4 ADD: AES Encryption APX 4 ADD: Full FP W/05/Keypad/Clock/VU 4 ENH: Over The Air Provisioning 4 ADD: UHF R1 MP Primary Band 4 ADD: APX Control Head Software 4

Standalone APX7500 salient characteristics:

GENERAL PERFORMANCE SPECIFICATIONS

Frequency Range: 380-470 MHz Channel Spacing: 25/20/12.5 MHz Emission Designator: 11K0F3E, 16K0F3E, 8K10F1D, 8K10F1E, 8K10F1W, 20K0F1E Max Frequency Separation: Full Bandsplit Rated RF Output: 10-40 Watts Max Frequency Stability: ±0.0002 % Modulation Limiting (Measured in the analog mode per ITA/EIA 603 single-tone method under nominal conditions): ± 5 kHz / ± 2.5 kHz Emissions: -5dBc Conducted Audio Response: +1, -3 dB

FM Hum & Noise: 25 kHz -53 dB, 12.5 kHz -50 dB Audio distortion: 0.60 %

Display: Tri-color display with intelligent lighting, 2 lines of text 14 characters max / 1 line of icons / 1 line of menus, available with Keypad Microphone, Multiple control head configuration (up to 2), Display contrast selector

Keypad: Volume Knob, Dim Button, Home Button, Power On/Off, Mode Knob, Menu Selection (Programmable), Navigation Button

RECEIVER PERFORMANCE SPECIFICATIONS

Frequency Range: 380-470 MHz Channel Spacing: 25/20/12.5 MHz Max Frequency Separation: Full Bandsplit Audio Output Power at 3% distortion: 7.5W or 15W Frequency Stability: ±0.8 PPM % Selectivity: 25 kHz channel 85 dB, 12.5 kHz 75 dB Intermodulation: 25 kHz 82, 12.5 kHz 83 dB Spurious Rejection: 80.6 dB FM Hum and Noise: 25 kHz -55.2 dB, 12.5 kHz Audio Distortion: 0.93 %

ENCRYPTION STANDARD

Federal Information Processing Standard (FIPS) 140-2 Level 3 Advanced Encryption Standard (AES) 256 bit encryption

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature: -30°C / +60°C Storage Temperature: -40°C / +85°C Humidity: Per MIL-STD Electrostatic Discharge (ESD): IEC 801-2 KV Water and Dust Intrusion: IP54, MIL-STD

GLOBAL POSITIONING SYSTEM

Channels: 12 Tracking Sensitivity: -153 dBm Accuracy (Accuracy specs are for long-term tracking (95th percentile values >5 satellites visible at nominal -130 dBm signal strength): <10 meters (95%) Cold Start: <60 seconds (95%) Hot Start: <10 seconds (95%) Mode of Operation: Autonomous (Non-Assisted) GPS

SPECIFIC REQUIREMENTS

Contractor shall comply with the provided equipment list; however, any deviations from this configuration shall be submitted with the offer and will be evaluated in accordance with the evaluation factor, Technical Capabilities (solution).

Ensure full compatibility with existing components.