W912PB19Q30220001.pdf

0011281463

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to answ er vendor questions, revise the CLIN description, and extend the closing date. Due to the number of changes, additional questions may be submitted up until 23 January 2019. The Specialist w ill compile and provide the answ ers to them via a subsequent amendment. How ever, the closing date of the solicitation w ill not be extended beyond 5 February 2019. Please see Summary of Changes.

Please see Summary of Changes.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 17-Jan-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912PB19Q3022

X 9B. DATED (SEE ITEM 11)

14-Jan-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

17-Jan-2019

CODE

RCO BAVARIA

AMERIKANISCHE BESCHAFFUNGSSTELLE

GEB 542

92655 GRAFENWOEHR LAGER

GERMANY

W912PB 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912PB19Q3022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 28-Jan-2019 10:00 AM to 05-Feb-2019 10:00 AM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

Metal: Dimensions: Height / Hoehe: 180 - 190 Centimeters Depth / Tiefe: 45 - 50 Centimeters Width / Breite: 91 - 101 Centimeters General: Color: One Color with a powder coat (single) light gray color paint finish. Material: 16 gauge Steel Frame & Doors: 2-Door with continuous or multiple hinges and 2-3 point locking mechanism (Top, bottom, and unhinged side of door) Lock: Lockable with Padlock Bottom closedThe interior compartment should be divided into two or three sections. A fixed top shelf (top section) may or may not be placed over a central dividing wall. With or without the fixed shelf, the interior sections should be divided by a central dividing wall separating an interior clothes rod for hanging clothes on one side, and multiple shelves, either fixed or adjustable, on the other side. The storage/wardrobe locker should have a raised base to keep contents of cabinet away from moisture from the floor. The locking mechanism should be heavy duty and consist of a two or three point locking mechanism that can be secured with a padlock. The doors shall be reinforced and secured to the cabinet with either a continuous, or multiple (more than 2) hinges for security. The contractor will coordinate scheduling of delivery with CMC Manager of delivery of Lockers to specific buildings. The contractor shall unload the pre-assembled lockers, place them ready for use in the barracks, and remove all packaging material to complete delivery. Contractor will coordinate access to the installation to perform warranty work if/when required.

To:

70”-75”H x 36”W x 18”-20”D Storage/wardrobe locker constructed with 16 gauge steel, with a powder coat (single) light gray color paint finish. The interior compartment should be divided into three sections. A fixed top shelf (top section 13”) placed over a central dividing wall. The lower interior sections should be divided equally by a central dividing wall. The right interior side, as you face the cabinet, will have a clothes rod for hanging clothes. The left side, as you face the cabinet, will have four fixed shelves. The storage/wardrobe locker should have a 2”- 4” raised base to keep the contents of cabinet from moisture on the floor. The locking mechanism should be heavy duty and consist of a two or three point locking mechanism that secures both doors. The doors must be capable of being locked with a padlock. The doors shall be reinforced and secured to the cabinet with either a continuous, or multiple (more than 2) hinges for security. The storage / wardrobe locker must be preassembled and ready for use. Delivery will be to the interior of the buildings at Camp Aachen, Grafenwoehr Training Area. Delivery may be phased as detailed in the Questions and Answers.

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0001 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

30 dys. ADC 1,646 USAG BAVARIA, TOWER BARRACKS

BLDG. 1001

92655 GRAFENWOEHR

GERMANY

FOB: Destination

W81NTH

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

72 dys. ADC 1,646 USAG BAVARIA, TOWER BARRACKS

BLDG. 1001

92655 GRAFENWOEHR

GERMANY

FOB: Destination

W81NTH

The following have been added by full text:

QUESTIONS AND ANSWERS

Question: How many side shelves do you require per locker?

Answer: 4

Question: Is the locker to be solid, have louvers or be completely ventilated?

Answer: The locker can be solid or have louvers/be ventilated as long as it does not affect usability or security.

Question: Would 24 inches be an acceptable depth for the wardrobe?

Answer: No; a depth of 24 inches is not acceptable.

Question: Where on post are the lockers to be delivered?

Answer: In Camp(s) Aachen/Algiers, Tower Barracks, Grafenwoehr, Germany.

Question: Will unloading equipment be available for use?

Answer: No; contractor must supply own equipment for unloading the delivery vehicle.

Question: Can delivery be phased? If so, over how much time?

Answer: Deliver 25% of the units within 30 days, with 25% of the units following every 2 weeks until completed.

Early deliveries are acceptable to the Government.

Question: Would a thickness of 22 gauge be acceptable?

Answer: No; 22 gauge is not acceptable.

Government Point of Contact:

Contract Specialist: Jason Travis E-mail: jason.w.travis.civ@mail.mil Phone: (+49) 09641-83-5108

(End of Summary of Changes)