Product_Description_Servicing_Platform.pdf

1 EA Servicing Platform

Equal or equivalent to a RUTHMANN STEIGER TB 220.2 (4.6 – 5,5 t). Must be able to drive off road and must have 4x4 drive.

Chassis with cab

Type: IVECO 55 S 17 W or equivialent Drive: 4x4 BB all wheel drive Chassis clearance: ca. 34000 mm must be able to be used off road Emission: Euro 6

Servicing Platform:

Steiger TB 220.2 or equivialent max. working height 22,25 m max. outreach 14,00 m Range of rotation 450 degrees Size of working cage 1,40 x 0,70 m Carrying capacity of working cage 200 kg.

Perm. siting inclination 5 degrees Overall height 3,12 m Vehicle width 2,17 m Total length of vehicle 7,20 m Jacked width (Outer edge of jack plates) 3,51 m Perm. total weight 4,6 t - 5,5 t

Paint: RAL 2011 Orange

Start/Stop of vehicle engine from working cage and atemergency control with ignition lock when gear is shifted.

Installation of an electric cable 3 x 2,5 sq.mm for 230 Volts from vehicle to working cage with implement plug (CEE) and Schuko-socket including earth leakage circuit breaker. Locking in such a way, that lifting of machine only becomes possible with extended jacks.

Cage rotating device approx. 2 x 55°

2 rings for the fixation of safety belts (without safety belts).

Mounting of hydraulic pump to power take-off of vehicle engine. Sensitive, electrical proportional control inside working cage for all movements including those of the jacks.

Comfortable emergency control with plain text indication at vehicle

Automatic positioning system: to be switched on an off by means of key switch, aligns the Steiger automatically, control by means of levelling indicator.

EMERGENCY-CUT-OFF push button in the working cage and at the emergency control.

Operating switch in vehicle for protection of machine against unauthorized operation.

4 hydraulic stabilizing-jacks horizontal-vertical,with movebable jack plates to warrant stability.

Jacked width variable. Maximum jacked width from outer edge of jack plates in front, approx. 3,51 m, at the rear approx. 3,31 m. One-side-jacking in front,approx. 2,84 m, at the rear approx. 2,74 m. Minimum jacking only approx.

2,17 m, which means: Extension of the rear stabilizing-jacksts on the ground within the vehicle-profile.

Memory function: By means of selection keys certain positions can be memorized and afterwards again be driven to.

Automatic return to basic position.

Hand pump for the emergency operation at vehicle. Installed load-moment limitation.

3 earth connecting pieces with inside thread M 12, at auxiliary frame, turret and lifting boom (without earthing cable, without fastening screws).

Mudguards (polyester) for the rear axle.

Corrosion prevention of the surface area underneath the aluminum-decking by means of a paint-preservative (wax), as additional protection against environmental and atmospheric influences.

Safety sign with reflecting films (red / white) according to DIN 30710.

CE-mark and Attestation of Conformity CE.

Polyester working cage, size 1,40 x 0,70 m, with lateral entrance, instead of the standard aluminum working cage

Including insulation according to DIN VDE 0682-742 standards:

TÜV-inspection according to the German regulation StVZO

Cover for the control panel with a grey, heat resistant synthetic canvas.

2 LED marker lights in tall execution, orange, on the left and on the right side of the turret, to be controlled simultaneously by means of an original truck rocker-switch on the dashboard.

4 polyester supporting-plates for the stabilizing jacks, with grab handle, anti-slip / rubberized bottom side, milled slot for the base plate of the jack, including manual. Size approx. 400 x 500 x 40 mm,with supports left / right at the vehicle.

Protection cover for the group of valves underneath the aluminum decking

VEHICLE PAPERS

Registration Document (Fahrzeugschein) Vehicle Title (Fahrzeugbrief) CE - Confirmation

INSTRUCTIONS/TRAINING

Manufacturer or equivalent has to provide training and instructions to end user. Training time has to be coordinated with end user.

DELIVERY

USAG ANSBACH, Directorate of Public Works. Katterbach Kaserne or Storck Barracks.

Delivery location shall be agreed to at least one week prior delivery with customer.

Delivery and instructions needs to be during operation hours of the DPW.