W912P5-16-T-0046-0001.pdf

W38XDD61667238

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

W912P5-16-T-0046 For the supply and delivery of tw o (2) Doble 6150e Three Phase Pow er System Simulator, Electronics Services Section, Hendersonville, TN

This solicitation is being amended to address questions asked after the question period, revise the technical specifications (remove IEC61850 compliant specification) and extend the solicitation due date to 22 September 2016 at 11:00 a.m. Central Time.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 15-Sep-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P5-16-T-0046

X 9B. DATED (SEE ITEM 11)

08-Sep-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

15-Sep-2016

CODE

US ARMY CORPS OF ENGINEERS-CELRN-RC-N

DIRECTORATE OF CONTRACTING

110 9TH AVENUE SOUTH, ROOM A680

NASHVILLE TN 37202-1070

W912P5 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912P5-16-T-0046

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

Q&A

1. The solicitation is asking for two F6150e Test Sets but on page 6 of the solicitation it is stating that the system should be IEC61850 compliant. The F6150e does not have this capability, we do have a F6150SV that is capable of this request. Will the Government correct the specifications?

Answer: IEC61850 compliant specifications has been removed from the specifications.

2. DFARS 252.204-7011 on page 34 and 35 of the solicitation has a Computer, Desktop with CPU, Monitor, Keyboard and Mouse for a Quantity of 20 listed, please explain if that information is a requirement of this procurement.

Answer: The information provided in that clause is for informational purposes only.

3. Model F6150E does not meet the specification on the IEC 61850 requirement and as such they are unable to quote. Model F6159sv is the right one to have that capability and that they have send that feedback to ACE as well.

Will the Government correct the specifications?

Answer: See answer one (1).

REVISED SPECIFICATIONS

Specifications for Doble F6150e Three Phase Power System Simulator

Required: 02 items

Deliver to the following address

USACE

Attn: Richard Rieger 15 Overlook Circle Hendersonville, TN 37075

POC: Skylar Holloway 615-824-1032

Contractor shall provide a Doble 6150e with the following specifications:

Convertible Amplifiers o Current Mode

Convertible Source AC Ranges: 6 X 0.5, 1.0 A RMS (L-N); 3 X 0.5, 1.0 A RMS (L- N); a X 1.5, 3.0, 6.0 A RMS (L-N)

Convertible Source DC Ranges: 6 X 0.354, 0.707 A DC; 3 X .354, 0.707, 1.41 A DC;

1 X 1.06,2.12, 4.24 A DC

Power: 6 X 75VA/75 W; 3 X 150VA/150 W; 1 X 450 VA/450 W Resolution AC Ranges: 0.0001 A; 0.0001 A; 0.001 A Resolution DC Ranges: 0.0001 A; 0.0001 A; 0.001 A o Current Transient Mode Convertible Source AC Ranges: 8 X 0.75, 1.5 A RMS (L-N); 3 X 0.75, 1.5, 3.0 A

RMS (L-N); 1 X 2.25, 4.5, 9.0 A RMS (L-N)

Convertible Source DC Ranges: 6 X 0.53, 1.06 A DC; 3 X 0.53, 1.06, 2.12 A DC; 1 X

1.59, 3.18, 6.36 A DC

Power: 6 X 97.5 VA/97.5 W; 3 X 195 VA/195 W; 1 X 585 VA/585 W Resolution AC Ranges: 0.0001 A; 0.0001 A; 0.001 A Resolution DC Ranges: 0.0001 A; 0.0001 A AT .53, 1.06 A DC and 0.001 A AT 2.12

A DC; 0.001 A

o Voltage Mode

Convertible Source AC Ranges: 6X 75, 150 V RMS (L-N); 3 X 75, 150, 300 V RMS

(L-N); 1 X 150, 300, 600 V RMS (L-L)

Convertible Source DC Ranges: 6 X 106, 212 V DC; 3 X 106, 212, 424 V DC; 1 X

212, 424, 848 V DC

Power: 6 X 75VA/ 75 W; 3 X 150 VA/150 W; 1 X 300 VA/300 W Resolution AC Ranges: 0.01 V Resolution DC Ranges: 0.01 VVAT 106 V DC; 0.1 V DC AT 212, 424 V DC; 0.1 V

DC

Current Amplifiers o Conventional Mode

AC Ranges: 6 X 7.5, 15, 30 A RMS (L-N); 3 X 7.5, 15, 30, 60 A RMS (L-N); 1 X 7.5, 15, 22.5, 45, 90, 180 A RMS (L-N)

DC Ranges: 6 X 5.0,10.0, 20.0 A DC; 3 X 5.0, 10.0, 20.0, 40.0 A DC; 1 X 5.0, 10.0, 15.0, 30, 60, 120 A DC

Power: 6 X 75 VA/75 W and Transient 6 x 112.5 VA/112.5 W; 3 X 150 VA/ 150 W and transient 3 X 225 VA/ 225 W; 1 X 450 VA/45 W and transient 1 X 675 VA/675 W

Resolution AC Ranges: 0.001 A; 0.001 A at 7.5, 15, 30 A RMS AND 0.01 at 60 A RMS; 0.001 A at 7.5, 15, 22.5 A RMS and 0.01 A at 45, 90, 180 A RMS

Resolution DC Ranges: 0.001 A at 5 A DC and 0.01 A at 10, 20, 40 A DC; 0.001 A at

5.83 A DC and 0.01 A at 10, 20, 30, 60, 120 A DC

o Enhanced Mode AC Ranges: 6 X 8.75, 17.5, 35 A RMS (L-N); 3 X 8.75, 17.5, 35, 70 A RMS (L-N); 1

X 8.75, 17.5, 26.25, 52.5, 105, 210 A RMS (L-N)

DC Ranges: 6 X 5.83, 11.7, 23.3 A DC; 3 X 5.83, 11.7, 23.3, 46.6 A DC; 1 X 5.83, 11.7, 17.5, 35, 70, 140 A DC

Power: 6 X 87.5 VA/87.5 W, 131.25 VA/131.25 W; 3 X 175 VA/175 W, 262.5

VA/262.5 W; 1 X 525 VA/525 W, 787.5 VA/787.5 W

Resolution AC Ranges: 0.001 A; 0.001 A at 8.75, 17.5, 35 A RMS and 0.01 at 70 A

RMS; 0.001 A at 8.75, 17.5, 26.25 A RMS and 0.01 A at 52.5, 105, 210 A RMS

Resolution DC Ranges: 0.001 A at 5.83 A DC and 0.01 A at 11.7, 23.3 A DC; 0.01 A at 11.7, 23.3,46.6 A DC; 0.01 A at 11.7, 23.3, 35, 70, 140 A DC o AC Amplitude Accuracy at 60 Hz and 20-30 degrees C: 0.09% + .04%range o Convertible Source in Current Mode accuracy <0.5% o Phase Angle at 60 Hz: range - (359.9) – (0) – (-359.9) degrees, accuracy - +- .25 degrees, resolution +- 0.1 degrees o Distortion at 60 Hz: <0.1% o Frequency:

Bandwith: DC 3kHz at full power Range: DC; 0.1 HZ – 2.0kHz continuous full load Resolution: 0.001 Hz o Total logic inputs: 8 Isolated Inputs: 2

Voltage sense: 250 V RMS AC/ 300 V DC

Open Circuit Test Voltage: 12 V DC

Short Circuit Test Current 20 mA DC

Response Time: 0.1 msec max pickup/dropout

Input Impedance: 150 kohms

Isolation: +- 500 V peak Paried Inputs: 3 pairs

Voltage Sense: 250 V RMS AC 300 V DC

Open Circuit Test Voltage: 4 V DC

Short Circuit Test Current: >50 mA DC

Response Time: 0.1 msec max pickup/dropout

Input Impedance: 150 kohms

Isolation: +- 500 V peak o Logic Outputs: 8 (4 FET and 4 Relay)

Isolation Voltage: +- 500 V peak Response Time: FET: 0.1millisecond Relay: <10 millisecond Maximum make/break current: FET: 0.5 amps; Relay: Breaking cap AC: 2000 VA with Vmaz 250 V, Imax 8 A and breaking cap DC: 50 W with Vmax 300 V, Imax 8 A Input Voltage: 250 V RMS o Metering Functions DC Meter Inputs

Input Range: 0 - +- 10 V DC/ 0 - +-20 mA DC

Accuracy: <+0.05% AC Sources: <0.02% of metering loads Logic Input as Counters

Frequency: 10 k Hz

Pulse width: >175 nanoseconds o Variable Output Battery Simulator

Range: 6 – 300V DC Resolution: 0.3 V Power: 90 W, 1.5 A max 60 Hz ripple: <0.2% of range Accuracy: < +-5%

Enclosure: High impact, molded, flame-retardant ABS-meets National Sage Transit Association testing specification No. 1A for immunity to sever shock and vibration

Electronic Discharge Immunity: IEC 801-2 I.E.C. performance level 1 @ 10 kV:

normal performance within specifications. I.E.C. performance level 2 @ 20 kV: no permanent damage

Surge Withstand capacity: ANSI/IEEE c37.90. Simulator acts as a source during surge withstand capability tests, when the ANSI/IEEE specified isolating circuit is interposed between the simulator and the test relay

Line Power Supply: 105-264 V, 47-63 Hz

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 16-Sep-2016 02:00 PM to 22-Sep-2016 11:00 AM.

(End of Summary of Changes)