ATCH_1_SOW_Mobile_Loading_Ramp_FBO_4520.pdf

ATTACHMENT #1 STATEMENT OF WORK

Iowa Army National Guard Mobile Loading Ramp

RFQ# W912LP-19-Q-4520

You are invited to submit a quote to the NGIA-PFO-PC, 7105 NW 70th Avenue, Camp Dodge Joint Maneuver Training Center (CDJMTC), Johnston, IA 50131- 1824, ATTN: Ms. Kelsey Letcher, USPFO Purchasing & Contracting for a Mobile Loading Ramp.

All specifications of the proposed items must meet or exceed the salient characteristics indicated below. Those specifications which do not meet the minimum salient characteristics must be identified as a deviation to the requirement, and the technical specifications of the proposed deviation must be provided in writing as an attachment to the quotation. Product specifications/cut sheets MUST be included as an attachment to the quotation.

The following item(s) are requested:

LINE ITEM #: 0001

ITEM: Mobile Loading Ramp QUANTITY / UNIT: 1 each DESCRIPTION: Self-contained portable/mobile loading dock designed for loading and unloading all types of cargo; boxes, barrels, aircraft parts, mobile/non-mobile vehicles or any typical freight handled when loading and off-loading delivery trucks.

Salient Characteristics:

• Minimum of 55,000 weight bearing capacity

• Minimum level loading platform of 12’ wide and 12’ long

• Minimum 12’ wide ramp (to match the width of the loading platform)

• Maximum 15% grade ramp

• Minimum 5 year on-site repair warranty

• Trailer impact bumpers

• Min 8′ wide, fully adjustable dock plate/leveler (prefer 10’ wide)

• Ship’s ladder 24 inches wide to climb onto level part of dock from the side with a safety chain during non use.

• Heavy duty Wheel chocks to protect against trailer departure per OSHA

1910.178(k)

• Slot or compartment to hold the chocks that is attached to dock

• Removable handrails per OSHA Code 1910.23 (c)(1 &2)

• Hydraulic adjustable front safety legs (minimum 42” to 56” service range)

• Weatherproof and no maintenance height adjustment mechanisms

• Free-standing as an independent piece of equipment

• Size appropriate tires, capable for use on gravel and concrete

• Lunette ring installed for pintle connection for movement of ramp

• Bilateral forklift brackets to adjust placement of dock

ATTACHMENT #1 STATEMENT OF WORK

• Non-slip replaceable heavy duty dock and ramp grating

• Minimum 12 inch high dock and ramp curbing

• Onsite Training on setup and movement of ramp

• Technical Manual for the ramp

Contractor shall provide product specifications and warranty information for all items quoted. Warranty information must include the process for requesting warranty repairs.