Vendor Question and Answer.pdf

1. Are each of the 80 Units to be Stand-Alone, 6-sided Structures? for example, they would not be sharing sides with adjacent lockers? Correct. All 6 sides are to be enclosed with a steel, open mesh pattern.

2. Please clarify and/or offer an example image of 'Full Drop Front Panel'. Is that a Full

Unit Height, single door and single padlock hasp, that when opened would allow access to the (5) Lockers? Is this a standard left or right hand swing door, or is the door hinging along the bottom edge to fold down, in the case of having individual Locker Compartment Doors? Each Unit will have 5 individual lockers, each locker will have its own door that hinges on the bottom and drops down and must be capable of being locked with a padlock.

3. Open Mesh is noted as FRONT, TOP, and BACK; but 6 gauge is noted for SIDES, END, &

LID. Are TOP and LID different surfaces? The frame is to be 6 gauge steel, and the covering is open wire mesh.

4. Are the 'shelves' to be Wire Mesh, or Solid Sheet Metal, or other? The shelves are to be steel and have a weight capacity of a minimum of 200lbs.

5. Is the 200-pound capacity requested for one opening, a column of five units, or the entire rack system. The weight limit is for every shelf (opening). There are 80 Units total. Each Unit needs to have 5 individual lockers (openings) in it. Each individual locker (opening) needs to have a minimum weight limit of 200 lbs.