PWS_TREE_REMOVAL_with_WD.pdf

PERFORMANCE WORK STATEMENT (PWS)

FOR

SELFRIDGE AIR NATIONAL GUARD BASE, MICHIGAN (SANGB)

TREE/BRUSH REMOVAL

1.0 General:

1.1 Scope. The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to remove all tree growth vegetation (standing, leaning, or lying down) and brush located within the designated areas shown on the project drawings, to support Selfridge Air National Guard Base (ANGB), Michigan (Macomb County), as defined in this PWS. The contractor shall perform to the standards in this contract.

1.2 Background. The Government is seeking tree/brush removal services to support Selfridge ANGB, MI. The contractor’s staff shall be fully qualified, professional, and customer service oriented. The contractor shall ensure quality work performance in accordance with (IAW) applicable standards and guidelines. Additionally, the contractor is expected to be a partner with the base community in continuously improving the quality of programs and service offered to customers.

1.3 Period of Performance (PoP): Services shall be completed within 12 months of contract award.

1.4 General Information:

1.4.1 Quality Control (QC). The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed IAW this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary. A written copy of the contractor’s QCP shall be furnished to the Contracting Officer (KO) at the pre-performance meeting. Records of the contractor’s quality inspections shall be maintained for the life of the contract and made available for Government inspection as requested. The Government evaluator must have a specific contractor quality control inspector to notify in case of customer complaints. After acceptance of the QCP, the contractor shall obtain the KO’s acceptance in writing of any proposed changes to its QCP.

(Technical Exhibit 2)

1.4.2 Quality Assurance (QA). The Government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government must do to ensure that the contractor has performed IAW the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality levels/defect rates.

1.4.2.1 Government remedies. The KO will follow the requirements of FAR 52.246-4, Inspection of Services – Fixed-Price, for contractor’s failure to correct non-conforming services. In the event that services fail to conform to contract requirements, and cannot be remedied by re-performance, the Government reserves the right to reduce the contract price to reflect the reduced value of the non-conforming services.

1.4.2.1.1 The contractor shall ensure that timely and effective corrective action is obtained for all deficiencies identified by the Government. All deficiency responses shall include identification of the cause of the deficiency to preclude recurrence and an analysis of the quality program’s effectiveness in the area of the deficiency.

1.4.3 Recognized Holidays. The contractor is not required to work during Federal Holidays. The following are recognized US holidays.

New Year’s Day 1 January Martin Luther King, Jr.’s Birthday 3rd Monday in January Presidents Day 3rd Monday in February

Memorial Day Last Monday in May Independence Day 4 July Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans Day 11 November Thanksgiving Day 4th Thursday in November Christmas Day 25 December

1.4.3.1 When the holiday falls on a Saturday, the observed day shall be on the prior Friday. When the holiday falls on a Sunday, the observed day shall be on the following Monday.

1.4.4 Place and Performance of Services. The contractor shall perform the services required under this contract within core operating hours, which are 7:00 a.m. through 4:30 p.m. Eastern Standard Time, Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be in locations as indicated on the Project Drawings, at Selfridge ANG Base, MI. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS.

1.4.4.1 The contractor may request permission to work outside these hours by obtaining approval from the KO at no additional cost to the Government (includes weekends and extended daily work hours). Overtime and/or weekend, or holiday work typically involves internal extra costs to the Government for overtime inspection and utilities, and generally is not approved unless determined to be absolutely necessary to sustain mission critical facilities.

1.4.4.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.4.3 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times. The contractor shall ensure compliance with all regulations and orders of the installation which may affect performance.

1.4.4.4 Base Entry. The contractor and its employees shall comply with all base traffic regulations. The award of this contract does not create a right to have access to any military installation.

1.4.4.5 Retrieving Identification Media. The contractor shall retrieve all identification media, including vehicle passes, from employees who depart for any reason before the contract expires (e.g. terminated for cause, retirement, etc.), and upon completion of all work of the contract. Contractor shall turn in all retrieved identification media to the Pass and Identification Office. (Technical Exhibit 2)

1.4.4.6 Employees with Criminal Records. Employees with criminal records shall be identified on an individual basis to the KO.

1.4.4.7 Employee Training. The contractor is responsible for providing a fully trained and qualified workforce.

Therefore, except as otherwise indicated, the contractor shall train, qualify, and certify personnel for specific job tasks to be performed at its own expense. Records of training, qualification, and certification shall be maintained by the contractor and made available for Government review upon request.

1.4.5 Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR).

The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes. The contractor, his employees, and his subcontractors are subject to, and shall abide by and comply with, all relevant statutes, ordinances, laws and regulations of the United States (including Executive Orders of the President) and any state (or other public authority now or hereafter in force).

1.4.5.1 COMSEC/IT Security. All communications with DoD organizations are subject to communications security (COMSEC) review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractors place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information.

1.4.5.2 Base Access/Security. Prior to access to this installation the contractor shall provide a list to the CS of contractor employees that includes the employees’: full name, date of birth, driver’s license number, state of issue, gender, and race. The contractor shall submit a revised list to the KO whenever changes occur (new hire and terminated employee). (Technical Exhibit 2)

1.4.5.2.1 Contractor and contractor personnel shall comply with Selfridge ANGB registration requirements for company and privately owned vehicles on Government property. Entry authorizations and vehicle registrations must be renewed as required by Pass and Identification.

1.4.5.2.2 Vehicles. Contractor personnel are subject to random personnel and vehicle searches. If contractor personnel refuse to be searched, they will be denied entry to the base. Denial of entry to personnel who refuse to be searched, or detention of personnel found to be in possession of contraband, may result in loss of base driving privileges, debarment from the base, or other administrative action.

1.4.5.2.3 Contractor personnel are subject to random vehicle speed control checks. Contractor personnel cited for speeding on the installation may lose base driving privileges, debarment from the base, or other administrative action. Contractor personnel wishing to operate a privately owned vehicle on Selfridge ANGB must comply with all base registration requirements.

1.4.5.2.4 Weapons, Firearms, and Ammunition. Contractor employees are prohibited from possessing weapons, firearms, or ammunition, on themselves or within their contractor-owned or privately-owned vehicles while on Selfridge ANGB.

1.4.5.3 Antiterrorism: Contractor shall adhere to installation guidance and operational plans concerning the antiterrorism program. Attend required meetings as identified by the installation’s antiterrorism office. Participate in installation random antiterrorism measure (RAM) program for surveillance and protection of infrastructure.

Report results of RAMs to the installation antiterrorism office. Initiate actions directed by the installation commander during changes to force protection conditions to increase surveillance and protection of infrastructure.

Immediately notify base security forces on any suspicious events

1.4.5.4 Contractor personnel shall not enter any restricted area without the prior approval of the KO and without being accompanied by a proper security escort.

1.4.5.5 Physical Security. The contractor shall be responsible for safeguarding all Government property and controlled forms, if provided for contractor use. The contractor shall ensure at the end of each work period, all Government facilities, equipment, and materials are secured, to include turning off all lights and water, turning down the heat, and securing all facility doors and windows.

1.4.6 Safety/Environmental: The contractor shall comply with all federal and state OSHA requirements and standards, technical orders, regulations, and referenced publications as published in the OSHA 29 CFR. The contractor shall comply with the highest degree of safety protection where any disagreements exist. The contractor shall comply with the US Army Corps of Engineers Safety and Health Requirements Manual EM 385-1-1.

Additionally, the contractor shall comply with installation regulations governing safety and fire prevention, IAW SANGBI 32-7, Fire Protection Program. The KO, Base Civil Engineer (BCE) or designated representative, Ground

Safety, and Security Police may issue an order to the contractor or employee(s) to stop all or part of the contractor’s work until all violations are corrected. Bio-environmental Engineering personnel, who notice violation of OSHA or local standards, will notify the KO who has the authority to stop all or part of the contractor’s work. The contractor shall not be excused for unsatisfactory performance that may result from a stop work order.

1.4.6.1 Accident prevention and safety practices on contractual work under the jurisdiction of the Contracting Officer are the responsibilities of the contractor concerned. The contractor shall brief all employees on proper safety and accident reporting. The contractor shall provide all occupational health services to his employees. Contractor employees shall be instructed to notify the contractor’s Contract Manager of potential or existing occupational health hazards that require attention.

1.4.6.2 Liability. The contractor hereby agrees to release the Government (to include its officer, enlisted personnel, agents, and employees) from any liability for any loss, damage, or injury sustained by the contractor or his employees during the performance of this contract. The contractor also agrees to indemnify the Government for any loss, damage, or injury to Government personnel or agents or other third parties, provided such loss to the Government is caused by the negligence of the contractor or his personnel while performing this contract.

1.4.6.3 Hazardous Materials (HM) Handling. The contractor shall comply with all federal, state, local and Selfridge ANGB regulations concerning the use, storage, and reporting of any HM used, or planned to be used in the contractor’s operations. IAW AFI 32-7086, Chapter 2, paragraph 2.6.9.2. HMs Management, the contractor shall provide to the Selfridge ANGB HAZMAT office, a list of any HM. The list shall be submitted to the KO prior to the start of work requiring HMs. The list shall identify each HM, an estimate of how much material will be used, amount stored, and location of the storage facility and also contain a copy of each material’s Material Safety Data Sheet (MSDS). The contractor shall also maintain a copy of all MSDS used in the performance of this contract.

Where applicable the contractor shall use environmentally safe products in the course of completion of the project.

The contractor shall be responsible for the safe handling of all potentially HMs while on Selfridge ANGB. In the case of a release of a HM into the environment, the contractor shall initiate clean up and make all notifications as outlined in the Selfridge ANGB Spill Plan. If base personnel are involved in clean-up operations, the contractor’s responsibility will include the reimbursement of all costs incurred by the Government to include supplies, man-hours, and disposal of the waste. HM will be defined as any substance listed as having characteristics of flammability, corrosivity, reactivity, toxicity, or contains any listed constituents, or be otherwise harmful to personnel and/or the environment.

1.4.6.3.1 Handling, Storage and Disposal of Hazardous Waste (HW). All HW shall be handled and stored in strict compliance with federal, state and, local regulations. Contractors will be held fully liable for any negligence that results in a Notice of Violation or other penalty. HW will be defined as a solid or liquid waste which exhibits a characteristic such as flammability, corrosivity, reactivity, or toxicity, as identified in 40CFR 261.20-261.33 (Code of Federal Regulations: Discarded commercial chemical products, off-specification species, container residues, and spill residues). Any mixture of a solid or liquid waste and a listed HW is also considered a HW. It must be understood that proper management of any waste generated, hazardous or non-hazardous, shall and will be the responsibility of the contractor. Any Government owned shipment of HW shall be documented on a HW Manifest and signed by a Civil Engineering Environmental Office representative. A copy of the generators’ manifest shall be maintained by the 127th Civil Engineering Squadron/ Environmental Flight (127CES/CEV).

1.4.6.4 Solid Waste Disposal: Following the instructions on the form, the contractor shall report the disposition of any wood chips, cutting, and/or miscellaneous debris to the 127CES/CEV, using a Selfridge ANGB Solid Waste Tracking and Diversion Form, SANGB form 72. (Technical Exhibit 2)

1.4.7 The contractor shall comply with the requirements of the Air Force Affirmative Procurement Program and EPA’s Comprehensive Procurement Guideline and Recovered Materials Advisory Notice contained therein, and the installation Affirmative Procurement Program. Affirmative Procurement is the purchase of supplies and services containing post-consumer, recycled or recovered materials. The contractor shall support the program by identifying, pursuing, and tracking the procurement of these items where applicable.

1.4.8 Special Qualifications:

1.4.8.1 All contractor employees must read, write, speak, and understand English fluently.

1.4.8.2 All contractor employees who operate motorized vehicles on SANGB shall possess a current state driver’s license.

1.4.9 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR Subpart 42.5. The KO, Contracting Officer’s Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9.1 Government Observations and Inspections. Government personnel other than KOs and CORs may occasionally observe contract operations. These personnel will not, however, interfere nor provide direction to the contractors’ performance.

1.4.10 Contract Manager (CM): The contactor shall provide a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO. The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, or the KO if a COR is not available, to resolve issues, receive directions and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10.1 The CM or alternate(s) shall be available during normal duty hours within 45 minutes of notification to meet on the installation with the COR or other Government personnel (designated by the KO). After normal duty hours, the manager or designated alternate(s) shall be available within one (1) hour of notification. The contractor shall furnish, in writing to the KO, the names and phone numbers of the CM and alternate(s) not later than the contract pre-performance conference. The KO shall be notified immediately whenever changes are made.

1.4.10.2 Performance Evaluation Meetings. The KO will require the CM to meet with the KO, CS, COR, and other Government personnel as deemed necessary. These meetings shall be held weekly for the first month of the contract and monthly thereafter, or as determined by the KO. The purpose of these meetings is to establish a partnership to resolve issues. Written minutes of any such meeting shall be recorded in the contract and distributed to all interested parties.

1.4.11 Contractor Employees. The contractor shall employ only personnel who meet or exceed minimum qualifications. Resumes/additional documentations for personnel proposed to fill the CM position shall be provided to the KO at the pre-performance conference. Documentation shall also be provided during the contract performance should any changed in personnel be made. The contractor shall not employ persons for work on this contract if such employee is identified to the contractor by the KO as a potential threat to the health, safety, security, general well-being, or operational mission of the installation and its population.

1.4.11.1 The contractor’s staff shall be fully qualified, professional, and customer service oriented. The contractor shall ensure quality work performance IAW applicable standards and guidelines. Additionally, the contractor is expected to be a partner with the base community in continuously improving the quality of programs and service offered to customers.

1.4.11.2 Identification of Contractor Employees: All contractor personnel are required to identify themselves as such to avoid creating an impression that they are Government employees. Contractor personnel shall present a neat appearance and wear identification badges or uniforms distinguishing themselves as such. The badges/uniforms shall have the company name and employee name displayed.

1.4.12 Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in any form of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at FAR 22.17.

1.4.13 Conservation of Utilities. The contractor shall ensure employees practice utilities conservation. Service problems shall be immediately identified to the COR.

1.4.14 Coordination with Other Contractors. The Government may award other contracts or additional work not prescribed in this contract. The contractor shall fully cooperate with other such contractors. The contractor shall not commit or permit any act that will interfere with the performance of work by another contractor.

1.4.15 The contractor may propose substitutions for the Government’s consideration for any equipment and software for any provided product(s) that may become available as a result of technical improvements, to include billing administration and processing services.

2.0 Definitions/Acronyms

2.1 CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.2 CONTRACTING OFFICER (KO). A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.3 CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.4 DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.5 DELIVERABLE. Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.6 KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.7 PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.8 QUALITY ASSURANCE (QA). The Government procedures to verify that services being performed by the contractor are performed according to acceptable standards.

2.9 QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.10 QUALITY CONTROL (QC). All necessary measures taken by the contractor to assure that the quality of an end product or service shall meet contract requirements.

2.11 SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.12 WORK DAY. The number of hours per day the contractor provides services in accordance with the contract.

2.13 WORK WEEK. Monday through Friday, unless specified otherwise.

2.14 ACRONYMS: Following are acronyms commonly used in DoD contracts.

ADLS Advanced Distribution Learning System AF Air Force AFI Air Force Instruction AFMAN Air Force Manual ANG Air National Guard AT/OPSEC Antiterrorism/Operational Security CAC Common Access Card CFR Code of Federal Regulations CM Contract Manager CMRA Contractor Manpower Reporting Application COD Certificate of Destruction COMSEC Communications Security COR Contracting Officer Representative COTS Commercial-Off-The-Shelf CPARS Contract performance reporting system CS Contract Specialist DD254 Department of Defense Contract Security Requirement List DEERS Defense Enrollment Eligibility Reporting System DFARS Defense Federal Acquisition Regulation Supplement DFAS Defense Finance and Accounting System DOD Department of Defense FAR Federal Acquisition Regulation FPCON Force Protection Condition GFP/M/E/S Government Furnished Property/Material/Equipment/Services IA Information Assurance IAW In Accordance With IS / IT Information System(s) / Information Technology KO Contracting Officer MSDS Material Safety Data Sheets NHO Normal hours of operation NOTAM Notice to Airmen OCI Organizational Conflict of Interest ODC Other Direct Costs OPM Office of Personnel Management OPSEC Operations Security OSHA Occupational Safety and Health Standards PII Personally Identifiable Information PIPO Phase In/Phase Out PIV Personal Identity Verification PKI Public Key Infrastructure POC Point of Contact PoP Period of Performance

PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program RC Records Custodian SANGB Selfridge Air National Guard Base TA Trusted Agent TASS Trusted Associate Sponsorship System TE Technical Exhibit UIC Unit Identification Code UCI Unit Compliance Inspection WBT Web Based Training

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): The Government will not provide GFP/M/E/S to the contractor.

3.1 Emergency Medical Services: For response to on-site emergencies, call 911, and indicate to the operator that you are located on Selfridge ANGB.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E): The contractor shall furnish everything required to perform these services as indicated in Section 1.1.

4.1 Vehicles. The Government will not provide vehicles for use on this contract. The vehicle shall be of a conservative color, shall be maintained in a safe and serviceable condition, and shall present a professional appearance at all times. Vehicles found to be unsafe or unable to function as designed shall be removed from the installation and replaced at the contractor’s expense. Vehicle repairs shall not be accomplished on base. All vehicles shall be registered, licensed, and insured at all times.

4.1.1 Contractor vehicles shall have the company name prominently displayed on both sides of the vehicle and be maintained clean to present a neat, professional appearance

4.2 EQUIPMENT LIST: The contractor shall submit a complete list of equipment that will be used during the performance of this contract. This list shall be submitted with the contractor’s proposal.

5.0 Requirements:

5.1 TREE REMOVAL: The contractor shall remove all tree vegetation located within the designated areas.

5.1.1 Contractor shall accomplish all tree removal on dry and/or frozen ground before 15 March 2017 per Migratory Bird Action Guidance and jurisdictional wetland regulations.

5.1.2 Based on the plan, the contractor shall survey and establish the boundary limit of each area.

5.1.3 Trees shall be cut so that the stumps shall be no higher than 2” above ground level. At no point shall a stump be ground to below ground level.

5.1.4 All material (trunks, branches, and other debris generated during the removal process, as well as any and all downed, deadfalls or leaning trees and branches) and brush are to be removed from the designated cutting areas. All material shall be removed from SANGB and disposed of in a legal manner.

5.2 CHIPPING: Chipped material shall be removed from the site. No piles of chips can remain.

5.3 BURNING: Burning is not allowed.

5.4 SCHEDULING: The contractor shall prepare and submit a practical schedule showing the order in which the contractor will perform the work, and the dates on which the contractor anticipates starting, completing, and inspecting each task. This schedule shall be submitted with the contractor’s proposal.

5.5 WORK PLAN: The contractor shall describe how he/she plans to perform the contract. The plan shall be submitted with the contractor’s proposal.

5.6 RESTORATION: All ground surfaces disturbed (non-wetland) by the processes necessary to perform this work shall be restored.

5.7 CODE COMPLIANCE: All work shall be accomplished in accordance with the applicable codes and/or ordinances in force at the time of performance. It is the contractor’s responsibility to insure that where USDA, MDNR, EPA, MDEQ or other such regulations control the removal, handling, or disposal of materials, they shall be strictly adhered to whether or not specifically referenced in the project documents. Contractor shall follow all Federal, State and Local regulations concerning wetland protection. The contractor shall be responsible to develop, apply for, and pay for any soil erosion and/or wetland permits should it be determined that, due to the manner in which the contractor is conducting his removal operations, they are required.

5.8 Contractor Manpower Reporting Application (CMRA):

5.8.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Air Force via a secure data collection site.

5.8.2 The contractor shall completely fill in all required data fields using the following web address:

http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2013.

Contractors may direct questions to the help desk at http://www.ecmra.mil.

UIC Code: FFTQN0 Issuing Office DoDAAC: W912JB http://www.ecmra.mil/ http://www.ecmra.mil/

6.0 Publications/References: Publications applicable to this PWS are listed below: Publications may be found through the AF Portal https://www.my.af.mil/ publications link.

6.1 The contractor is obligated to follow those publications to the extent specified in other sections of this PWS.

The contractor shall be guided by those publications to the extent necessary to accomplish requirements in this PWS. The Government, at the start of the contract shall provide all publications and forms listed, or will provide access to the Air Force e-publishing website through the Air Force Portal, or other Government internet/intranet web pages.

6.2 Changes to listed publications from any organizational level may be issued during the life of the contract. The contractor shall implement changes and notify the KO in writing of any such change. If such change alters the magnitude of work, the contractor shall provide a proposal for a change in the contract price to the KO within 30 calendar days.

6.3 Publications. The contractor shall maintain access (electronic) to all items listed in this section. The contractor shall maintain currency by researching appropriate WEB sites.

6.4 All the publications are considered mandatory for successful performance of the contract.

PWS

Paragraph

Publication (Chapter/Page) Publication Title

1.4.2.1 FAR 52.246-1 Inspection of Services-Fixed Price

1.4.6 OSHA 29CFR

EM 385-1-1

SANGBI 32-7

• Occupational Safety and Health Administration Standards

• Army Corps of Engineers Safety and Health Requirements

Manual

• SANGB Fire Protection Program

1.4.6.3 AFI 32.7086, Ch 2, Para 2.6.9.2

Hazardous Material Handling

1.4.6.3.1 40CFR 261.20-261.33 CFR: Discarded commercial chemical products, off-specification species, container residues, and spill residues.

1.4.12 FAR 22.17 Combatting Trafficking in Persons

https://www.my.af.mil/

TECHNICAL EXHIBIT 1

Performance Requirements Summary

This Performance Requirements Summary includes performance standards. The Government will use these standards to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

PWS

Paragraph Task Performance Standard Acceptable Quality Levels (AQL)

Surveillance Method / By COR

5.1 Tree removal Remove tree vegetation from

designated areas

All tree vegetation is removed. 100% inspection

5.1.3 Stump height All remaining stumps shall be

no higher than 2 inches

95% of all stumps are less than 2” high Periodic inspection

5.2 Chipping

All chipped material shall be removed from site.

90% of all chipped material is removed from site.

Periodic inspection

5.4 Schedule

Contractor performs services in accordance with submitted schedule.

Services comply with the submitted schedule 90% of the time.

Periodic inspection

5.5 Ground

Restoration

Disturbed ground surfaces are restored to previous condition.

95% of ground surfaces are at pre-work condition upon completion.

Periodic inspection

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title Frequency Number of

Copies Medium/Format Submit To

1.4.1 - QCP Pre-performance meeting 1 Electronic Submission KO

1.4.4.5 Identification Media

Return upon completion of contract performance. Original(s) Hard Copy Pass and

Identification Office

1.4.5.2 Base Access

Information List

Prior to gaining access to base 1 Electronic Submission KO

1.4.6.3 HM List Prior to start of work 1 Electronic Submission KO

1.4.6.4 Solid Waste Tracking and

Diversion Form

Follow instructions on SANGB form 72 1 Electronic

Submission

127 CES/CEV

4.2 Equipment List With proposal 1 Hard Copy KO

5.4 Work Schedule With proposal 1 Hard Copy KO

5.5 Work Plan With proposal 1 Hard Copy KO

WD 05-2273 (Rev.-18) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2273 Daniel W. Simms Division of | Revision No.: 18 Director Wage Determinations| Date Of Revision: 12/29/2015 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Michigan

Area: Michigan Counties of Genesee, Lapeer, Macomb, Monroe, Oakland, St Clair, Wayne **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.22 01012 - Accounting Clerk II 15.96 01013 - Accounting Clerk III 18.77 01020 - Administrative Assistant 26.95 01040 - Court Reporter 19.80 01051 - Data Entry Operator I 13.85 01052 - Data Entry Operator II 15.12 01060 - Dispatcher, Motor Vehicle 21.98 01070 - Document Preparation Clerk 15.38 01090 - Duplicating Machine Operator 15.38 01111 - General Clerk I 13.37 01112 - General Clerk II 14.60 01113 - General Clerk III 16.39 01120 - Housing Referral Assistant 22.04 01141 - Messenger Courier 11.47 01191 - Order Clerk I 14.16 01192 - Order Clerk II 15.95 01261 - Personnel Assistant (Employment) I 17.30 01262 - Personnel Assistant (Employment) II 19.35 01263 - Personnel Assistant (Employment) III 21.57 01270 - Production Control Clerk 21.45 01280 - Receptionist 13.67 01290 - Rental Clerk 15.38 01300 - Scheduler, Maintenance 17.30 01311 - Secretary I 17.30 01312 - Secretary II 19.35 01313 - Secretary III 22.04 01320 - Service Order Dispatcher 19.04 01410 - Supply Technician 25.70

6/30/2016http://www.wdol.gov/wdol/scafiles/std/05-2273.txt?v=18

01420 - Survey Worker 18.56 01531 - Travel Clerk I 13.02 01532 - Travel Clerk II 14.14 01533 - Travel Clerk III 15.31 01611 - Word Processor I 15.07 01612 - Word Processor II 16.92 01613 - Word Processor III 18.93 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 23.66 05010 - Automotive Electrician 22.58 05040 - Automotive Glass Installer 21.84 05070 - Automotive Worker 21.84 05110 - Mobile Equipment Servicer 20.43 05130 - Motor Equipment Metal Mechanic 23.31 05160 - Motor Equipment Metal Worker 21.84 05190 - Motor Vehicle Mechanic 23.31 05220 - Motor Vehicle Mechanic Helper 19.71 05250 - Motor Vehicle Upholstery Worker 21.12 05280 - Motor Vehicle Wrecker 21.84 05310 - Painter, Automotive 22.58 05340 - Radiator Repair Specialist 21.84 05370 - Tire Repairer 19.58 05400 - Transmission Repair Specialist 23.31 07000 - Food Preparation And Service Occupations 07010 - Baker 18.55 07041 - Cook I 13.99 07042 - Cook II 15.07 07070 - Dishwasher 11.64 07130 - Food Service Worker 11.64 07210 - Meat Cutter 16.26 07260 - Waiter/Waitress 12.36 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 23.44 09040 - Furniture Handler 18.10 09080 - Furniture Refinisher 23.44 09090 - Furniture Refinisher Helper 20.50 09110 - Furniture Repairer, Minor 21.98 09130 - Upholsterer 23.44 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 14.97 11060 - Elevator Operator 14.97 11090 - Gardener 17.38 11122 - Housekeeping Aide 13.40 11150 - Janitor 13.41 11210 - Laborer, Grounds Maintenance 14.78 11240 - Maid or Houseman 12.13 11260 - Pruner 13.63 11270 - Tractor Operator 15.88 11330 - Trail Maintenance Worker 14.78 11360 - Window Cleaner 14.24 12000 - Health Occupations 12010 - Ambulance Driver 17.90 12011 - Breath Alcohol Technician 19.72 12012 - Certified Occupational Therapist Assistant 22.17 12015 - Certified Physical Therapist Assistant 22.17 12020 - Dental Assistant 17.03 12025 - Dental Hygienist 30.37 12030 - EKG Technician 25.82 12035 - Electroneurodiagnostic Technologist 25.82 12040 - Emergency Medical Technician 17.90 12071 - Licensed Practical Nurse I 17.61 12072 - Licensed Practical Nurse II 19.72

12073 - Licensed Practical Nurse III 21.34 12100 - Medical Assistant 14.58 12130 - Medical Laboratory Technician 22.29 12160 - Medical Record Clerk 15.74 12190 - Medical Record Technician 19.47 12195 - Medical Transcriptionist 18.11 12210 - Nuclear Medicine Technologist 33.56 12221 - Nursing Assistant I 11.25 12222 - Nursing Assistant II 12.27 12223 - Nursing Assistant III 13.40 12224 - Nursing Assistant IV 15.04 12235 - Optical Dispenser 19.36 12236 - Optical Technician 17.61 12250 - Pharmacy Technician 17.78 12280 - Phlebotomist 15.04 12305 - Radiologic Technologist 26.11 12311 - Registered Nurse I 29.83 12312 - Registered Nurse II 32.20 12313 - Registered Nurse II, Specialist 32.20 12314 - Registered Nurse III 44.14 12315 - Registered Nurse III, Anesthetist 44.14 12316 - Registered Nurse IV 52.92 12317 - Scheduler (Drug and Alcohol Testing) 24.02 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.47 13012 - Exhibits Specialist II 26.61 13013 - Exhibits Specialist III 32.54 13041 - Illustrator I 25.01 13042 - Illustrator II 30.40 13043 - Illustrator III 35.82 13047 - Librarian 30.28 13050 - Library Aide/Clerk 13.49 13054 - Library Information Technology Systems 27.34 Administrator 13058 - Library Technician 18.56 13061 - Media Specialist I 18.54 13062 - Media Specialist II 20.75 13063 - Media Specialist III 23.13 13071 - Photographer I 19.42 13072 - Photographer II 22.83 13073 - Photographer III 29.56 13074 - Photographer IV 34.28 13075 - Photographer V 39.82 13110 - Video Teleconference Technician 19.13 14000 - Information Technology Occupations 14041 - Computer Operator I 17.16 14042 - Computer Operator II 19.20 14043 - Computer Operator III 21.40 14044 - Computer Operator IV 23.77 14045 - Computer Operator V 26.33 14071 - Computer Programmer I (see 1) 22.60 14072 - Computer Programmer II (see 1) 27.62 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.16 14160 - Personal Computer Support Technician 23.77 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 32.52 15020 - Aircrew Training Devices Instructor (Rated) 39.35

15030 - Air Crew Training Devices Instructor (Pilot) 50.79 15050 - Computer Based Training Specialist / Instructor 32.52 15060 - Educational Technologist 30.30 15070 - Flight Instructor (Pilot) 50.79 15080 - Graphic Artist 30.61 15090 - Technical Instructor 26.84 15095 - Technical Instructor/Course Developer 32.69 15110 - Test Proctor 21.80 15120 - Tutor 21.80 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 10.00 16030 - Counter Attendant 10.00 16040 - Dry Cleaner 13.34 16070 - Finisher, Flatwork, Machine 10.00 16090 - Presser, Hand 10.00 16110 - Presser, Machine, Drycleaning 10.00 16130 - Presser, Machine, Shirts 10.00 16160 - Presser, Machine, Wearing Apparel, Laundry 10.00 16190 - Sewing Machine Operator 14.52 16220 - Tailor 15.65 16250 - Washer, Machine 11.08 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 26.18 19040 - Tool And Die Maker 29.03 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 20.65 21030 - Material Coordinator 24.49 21040 - Material Expediter 24.54 21050 - Material Handling Laborer 18.05 21071 - Order Filler 15.92 21080 - Production Line Worker (Food Processing) 20.65 21110 - Shipping Packer 17.34 21130 - Shipping/Receiving Clerk 17.34 21140 - Store Worker I 17.19 21150 - Stock Clerk 21.86 21210 - Tools And Parts Attendant 20.65 21410 - Warehouse Specialist 20.65 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.30 23021 - Aircraft Mechanic I 27.91 23022 - Aircraft Mechanic II 29.30 23023 - Aircraft Mechanic III 30.84 23040 - Aircraft Mechanic Helper 19.51 23050 - Aircraft, Painter 25.78 23060 - Aircraft Servicer 22.27 23080 - Aircraft Worker 23.38 23110 - Appliance Mechanic 23.44 23120 - Bicycle Repairer 18.66 23125 - Cable Splicer 27.79 23130 - Carpenter, Maintenance 25.15 23140 - Carpet Layer 24.10 23160 - Electrician, Maintenance 32.65 23181 - Electronics Technician Maintenance I 26.20 23182 - Electronics Technician Maintenance II 27.07 23183 - Electronics Technician Maintenance III 31.31 23260 - Fabric Worker 23.20 23290 - Fire Alarm System Mechanic 24.83 23310 - Fire Extinguisher Repairer 22.37 23311 - Fuel Distribution System Mechanic 25.62 23312 - Fuel Distribution System Operator 22.26 23370 - General Maintenance Worker 23.96 23380 - Ground Support Equipment Mechanic 27.91

23381 - Ground Support Equipment Servicer 22.27 23382 - Ground Support Equipment Worker 23.38 23391 - Gunsmith I 22.37 23392 - Gunsmith II 24.10 23393 - Gunsmith III 25.75 23410 - Heating, Ventilation And Air-Conditioning 25.96 Mechanic 23411 - Heating, Ventilation And Air Contditioning 26.71 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 29.63 23440 - Heavy Equipment Operator 27.30 23460 - Instrument Mechanic 29.03 23465 - Laboratory/Shelter Mechanic 24.89 23470 - Laborer 16.69 23510 - Locksmith 23.44 23530 - Machinery Maintenance Mechanic 28.66 23550 - Machinist, Maintenance 27.99 23580 - Maintenance Trades Helper 19.60 23591 - Metrology Technician I 29.03 23592 - Metrology Technician II 29.96 23593 - Metrology Technician III 30.88 23640 - Millwright 34.10 23710 - Office Appliance Repairer 24.76 23760 - Painter, Maintenance 26.60 23790 - Pipefitter, Maintenance 29.87 23810 - Plumber, Maintenance 29.24 23820 - Pneudraulic Systems Mechanic 25.75 23850 - Rigger 25.62 23870 - Scale Mechanic 24.10 23890 - Sheet-Metal Worker, Maintenance 29.24 23910 - Small Engine Mechanic 23.98 23931 - Telecommunications Mechanic I 26.29 23932 - Telecommunications Mechanic II 27.07 23950 - Telephone Lineman 26.29 23960 - Welder, Combination, Maintenance 26.46 23965 - Well Driller 25.34 23970 - Woodcraft Worker 25.75 23980 - Woodworker 22.37 24000 - Personal Needs Occupations 24570 - Child Care Attendant 13.85 24580 - Child Care Center Clerk 18.10 24610 - Chore Aide 11.03 24620 - Family Readiness And Support Services 16.29 Coordinator 24630 - Homemaker 19.20 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 28.00 25040 - Sewage Plant Operator 25.78 25070 - Stationary Engineer 28.00 25190 - Ventilation Equipment Tender 21.57 25210 - Water Treatment Plant Operator 25.78 27000 - Protective Service Occupations 27004 - Alarm Monitor 20.29 27007 - Baggage Inspector 12.93 27008 - Corrections Officer 23.65 27010 - Court Security Officer 23.72 27030 - Detection Dog Handler 19.75 27040 - Detention Officer 23.65 27070 - Firefighter 21.27 27101 - Guard I 12.93 27102 - Guard II 19.75 27131 - Police Officer I 27.65

27132 - Police Officer II 30.72 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 14.14 28042 - Carnival Equipment Repairer 14.65 28043 - Carnival Equpment Worker 12.22 28210 - Gate Attendant/Gate Tender 14.59 28310 - Lifeguard 13.00 28350 - Park Attendant (Aide) 16.32 28510 - Recreation Aide/Health Facility Attendant 11.16 28515 - Recreation Specialist 16.58 28630 - Sports Official 13.00 28690 - Swimming Pool Operator 20.87 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 22.58 29020 - Hatch Tender 22.58 29030 - Line Handler 22.58 29041 - Stevedore I 21.82 29042 - Stevedore II 23.37 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 38.88 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.82 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.53 30021 - Archeological Technician I 20.08 30022 - Archeological Technician II 22.47 30023 - Archeological Technician III 27.83 30030 - Cartographic Technician 27.83 30040 - Civil Engineering Technician 27.83 30061 - Drafter/CAD Operator I 20.08 30062 - Drafter/CAD Operator II 22.47 30063 - Drafter/CAD Operator III 25.05 30064 - Drafter/CAD Operator IV 30.82 30081 - Engineering Technician I 18.36 30082 - Engineering Technician II 21.64 30083 - Engineering Technician III 25.16 30084 - Engineering Technician IV 31.16 30085 - Engineering Technician V 36.70 30086 - Engineering Technician VI 44.38 30090 - Environmental Technician 25.01 30210 - Laboratory Technician 21.70 30240 - Mathematical Technician 27.83 30361 - Paralegal/Legal Assistant I 20.88 30362 - Paralegal/Legal Assistant II 25.86 30363 - Paralegal/Legal Assistant III 31.63 30364 - Paralegal/Legal Assistant IV 38.28 30390 - Photo-Optics Technician 27.83 30461 - Technical Writer I 25.25 30462 - Technical Writer II 30.90 30463 - Technical Writer III 36.08 30491 - Unexploded Ordnance (UXO) Technician I 24.71 30492 - Unexploded Ordnance (UXO) Technician II 29.90 30493 - Unexploded Ordnance (UXO) Technician III 35.84 30494 - Unexploded (UXO) Safety Escort 24.71 30495 - Unexploded (UXO) Sweep Personnel 24.71 30620 - Weather Observer, Combined Upper Air Or (see 2) 24.80 Surface Programs 30621 - Weather Observer, Senior (see 2) 27.55 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 13.47 31030 - Bus Driver 17.19 31043 -…