Attachment_1_-_Specifications.pdf

Part Number: 012T88-33190-29

Cross Section of Part Number: 012T88-33190-29

Flame-Retardant Outer Jacket

Ripcord

Dielectric Strength Members

Dielectric Strength Members

Tight-Buffered Fiber

Dielectric Strength Members

Corning MIC® plenum cables are designed for use in plenum, riser and general purpose environments for in-trabuilding backbone and horizontal installations. These multifiber cables use 900 μm TBII® buffered fibers to al-low easy, consistent stripping and to facilitate termination.

The fibers are surrounded by dielectric strength members and protected by a flame -retardant outer jacket.

The all -dielectric cable construction requires no ground-ing or bonding. MIC plenum cables are ideal for routing inside buildings, within plenum areas and riser shafts, to the telecommunications rooms and workstations. The MIC plenum cables meet the application requirements of the National Electrical Code® (NEC®) Article 770 and are OFNP and FT -6 listed.

This cable is available in 12 different jacket colors – blue, orange, green, brown, slate, white, red, black, yellow, violet, rose and aqua. The colored jacket allows for easy visual identification of the cables. The standard jacket color will be determined by the dominant fiber type in the cable and will use the standard part numbers shown here. Contact Customer Care at 1 -800 -743 -2675 to order other color options.

Features and Benefits 900 µm TBII® Buffered Fibers Easy, consistent stripping

All-dielectric construction Requires no grounding or bonding

Flame-retardant jacket Rugged and durable

Standards Approval and Listings National Electrical Code®

(NEC®) OFNP, CSA FT-6,

ICEA S-83-596

Flame Resistance NFPA 262 (for plenum, riser and general building appli-cations)

MIC® Tight-Buffered Cable, Plenum 12 F, 50 µm multimode (OM4)

Product Specification 012T88-33190-29_NAFTA_AEN Page 1 | Revision date 2014-08-16

Part Number: CCH-01U

Closet connector housings (CCHs) provide interconnect or cross -connect capabilities between outside plant, riser or distribution cables and opto -electronics. Like other LANscape solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules.

From fiber and cable routing and strain relief, to port la-beling and termination, these housings reduce the risk of error that can disrupt networks.

The units are designed for rack mounting in 19 -in (48 cm) racks or optional 23 -in (58 cm) equipment racks (1.75 -in EIA hole spacing). They are available in rack space op-tions of 1U (two panels, cassettes or modules), 2U (four panels, cassettes or modules), 3U (six panels, cassettes or modules) and 4U (12 panels, cassettes or modules).

The 1U, 2U and 3U options feature a slide -out tray and see -through, removable top covers. The CCH -04U fea-tures a clear door, removable front and rear enclosures and a platinum -colored interior for maximum visibility and access.

Every CCH housing is shipped complete with strain relief brackets, routing clips and guides, and mounting brackets for proper installation. Documentation labels are provided and components can be added as needed to construct a fiber distribution frame for any application.

All housings include a removable tinted polycarbonate front door. All size housings have field -installable lock kits available for both front and rear doors.

All CCH housings can also be upgraded for pigtail splic-ing to full fiber capacity and easy, modular fiber manage-ment through the use of CCH Splice Cassettes (CCH - CS), or for easy, modular fiber management when using field -installable connectors through the use of CCH Slack Cassettes (CCH -CF).

Interconnect and cross-connect capability Ideal for field connectorization

Removable, translucent top covers (1U, 2U, 3U), re-movable rear cover (4U) Visibility and ease of access for installation, testing, and troubleshooting

Internal and external strain-relief options Flexibility for installation and moves, adds, and changes (MACs)

Accepts panels, modules, and cassettes Variety of field-termination options

Closet Connector Housing (CCH) one rack unit, holds two CCH connector panels

Product Specification CCH-01U_NAFTA_AEN Page 1 | Revision date 2016-02-12

CCH-04U (open) | Photo LAN1860

Closet connector housings (CCHs) provide interconnect or cross -connect capabilities between outside plant, riser or distribution cables and opto -electronics. Like other LANscape solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules.

From fiber and cable routing and strain relief, to port la-beling and termination, these housings reduce the risk of error that can disrupt networks.

The units are designed for rack mounting in 19 -in (48 cm) racks or optional 23 -in (58 cm) equipment racks (1.75 -in EIA hole spacing). They are available in rack space op-tions of 1U (two panels, cassettes or modules), 2U (four panels, cassettes or modules), 3U (six panels, cassettes or modules) and 4U (12 panels, cassettes or modules).

The 1U, 2U and 3U options feature a slide -out tray and see -through, removable top covers. The CCH -04U fea-tures a clear door, removable front and rear enclosures and a platinum -colored interior for maximum visibility and access.

Every CCH housing is shipped complete with strain relief brackets, routing clips and guides, and mounting brackets for proper installation. Documentation labels are provided and components can be added as needed to construct a fiber distribution frame for any application.

All housings include a removable tinted polycarbonate front door. All size housings have field -installable lock kits available for both front and rear doors.

All CCH housings can also be upgraded for pigtail splic-ing to full fiber capacity and easy, modular fiber manage-ment through the use of CCH Splice Cassettes (CCH - CS), or for easy, modular fiber management when using field -installable connectors through the use of CCH Slack Cassettes (CCH -CF).

Interconnect and cross-connect capability Ideal for field connectorization

Removable, translucent top covers (1U, 2U, 3U), re-movable rear cover (4U) Visibility and ease of access for installation, testing, and troubleshooting

Internal and external strain-relief options Flexibility for installation and moves, adds, and changes (MACs)

Accepts panels, modules, and cassettes Variety of field-termination options

Closet Connector Housing (CCH) four rack units, holds 12 CCH connector panels

Product Specification CCH-04U_NAFTA_AEN Page 1 | Revision date 2016-02-11

Part Number: CCH-CS12-E7-P00TE

CCH pigtailed splice cassettes enable faster field splicing and easy modular management of connectorization with-in the housing.

The CCH pigtailed splice cassettes are preloaded and pre -routed for quick fusion splicing of either individual or ribbon fiber pigtails, using the same space -saving plat-form as the standard CCH splice cassette.

The pre -routed pigtailed cassettes reduce field labor by streamlining the features and components of the pigtail cassette to allow for efficiencies in the field. They are prepped with a 3m pigtail assembly with all pre -existing CCH panel connector options. The pigtailed cassettes have 900 µm at the connector panel for added durability and colored 250 µm for ease of splicing as well as having strain relief pre -applied to the assemblies from the manu-facturing facility.

With the pigtailed cassette, the field will also enjoy the elimination of individual splice trays or separate splice housings, as well as allowing splicing to be done away from the rack housing in a suitable workspace as need-

ed. The modular design makes it easy to access the fiber in an individual cassette without disturbing the other fibers in the housing.

Each cassette is shipped with the pigtailed CCH adapter panel of choice, one rail for use with CCH -01U/2U/3U housings, and two rails used with CCH -04U housings.

Grommets and cable ties for additional strain relief and protective braided tubing for incoming cable are also included. Splicing cassettes ship with the appropriate quantity and type of heat -shrink splice protectors.

Many of our fiber optic hardware products are highly configurable. If you don’t see what you are looking for here, please review the ordering matrix contained in the family spec sheet found on the right, or con-tact Customer Care at 1 -800 -743 -2675.

Manage cable slack for a CCH panel in a modular footprint Fast, easy and reliable initial routing, and quick, simple reaccess for moves, adds and changes (MACs)

Includes everything needed to convert a CCH hous-ing for modular routing and/or splicing Easy ordering and field installation

Modular splice capability Manage all splices inside the housing

CCH Pigtailed Splice Cassette 12 F, SC duplex, 50 µm multimode (OM3/4)

Product Specification CCH-CS12-E7-P00TE_NAFTA_AEN Page 1 | Revision date 2016-03-09

Single-Panel Housing | Photo LAN6787

Single-Panel Housing (open) | Photo LAN6767

Corning single -panel housing is a cost -effective option for storage, protection and termination of optical fiber cables in applications with minimal mounting space. The hous-ing accepts standard LANscape® solution CCH connector panels and offers protection for the fiber cable and con-nectors for indoor wall -mount installations.

This compact unit has a 1.5 inch frontal projection and is optimized for use in locations such as Box -in -a -Box applications, building entrances, terminals, wiring closets, open office and other areas where space is a premium.

The SPH -01P housings have a stacking feature to al-low up to three independent SPH -01P housings to be stacked and function as one wall -mount unit allowing capacity expansion without consuming additional wall space. The built -in splice tray with routing guides pro-vide both protection and segregation of the cable and fiber during initial install and any future MAC work that is needed. The durable black metal housing can be used for splice management, cross -connect or both for up to 12 single fiber heat -shrink splices, and the improved splice organizer will also handle six ribbon heat -shrink splices if so desired. The single -panel housing can be mounted in multiple orientations including a DIN rail mounting option to allow fiber protection and connectivity in electronic and/or control cabinet applications as well as standard wall mounting.

Small wall-mount housing for pre-term or field term Minimal mounting space required; Box-in-a-Box

Metal housing with smooth, black powder coat finish Durability with better label adhesion

Stackable Grow capacity without more wall space

Built in splice tray Cable and fiber management; protection

DIN Rail Mountable Versatile mounting options

LANscape® Solutions Complexity reduction and adapter panel availability

Single-Panel Housing (SPH) Wall-mountable, holds one CCH connector panel, black

Product Specification SPH-01P_NAFTA_AEN Page 1 | Revision date 2016-02-29

Standards RoHS Free of hazardous sub-stances according to RoHS

2002/95/EG

Specifications

General Specifications Application Enterprise Networks

Mounting Type Wall-Mountable

Product Type Wall-Mountable Hardware

Design - Hardware Housing Color Black

Housing Type SPH

Number of Panels per Housing 1

Panel or Module Type CCH

Splice Tray Options Includes a 6-slot, 0.4-in splice holder which accommodates up to 12 heat-shrink single splices (double-stacked) and/or six heat-shrink ribbon splices

Mechanical Characteristics Dimensions (HxWxD) 16 cm x 14 cm x 5 cm (6.3 in x 5.5 in x 2.0 in)

Ordering Information Part Number SPH-01P

Product Description Single-Panel Housing, wall-mountable, holds 1 CCH connec-tor panel, black

EAN Code 4056418142739

Shipping Information Units per Delivery 1/1

Packaging Dimensions (W x D x H) 196.85 mm x 171.45 mm x 54.10 mm (7.75 in x 6.75 in x 2.13 in)

Single-Panel Housing (SPH) Wall-mountable, holds one CCH connector panel, black

Product Specification SPH-01P_NAFTA_AEN Page 2 | Revision date 2016-02-29

Shipping Information Shipping Weight 0.5 kg (1.0 lb)

Package Contents Housing; installation guide; 6 tie wraps, 1/8 x 4, black; 4 screws, #6-32 x .25 inch; 4 screws, #8-18 x 0.625 inch; and 1 small alcohol wipe for label surface cleaning

Single-Panel Housing (SPH) Wall-mountable, holds one CCH connector panel, black

Product Specification SPH-01P_NAFTA_AEN Page 3 | Revision date 2016-02-29

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.

All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.

© 2016 Corning Optical Communications. All rights reserved.

900 µm jacket at the connector panel Added fiber protection at the connector

Colored 250 µm at splice point Easy to identify and prep colored 250 µm for fast and easy splicing

Pre-prepped splice cassette Saves time in the field with a ready to splice product

Standards Approvals and Listings Meets ANSI/TIA/EIA-568A and 606

Specifications

General Specifications Application Enterprise Networks, Data Center

Product Type Rack-Mountable Hardware

Mounting Type CCH Housings, Wall-Mountable

Cable Type 250 µm

Fiber Category OM4/OM3

Technology Fusion Splice

Design - Hardware Fiber Count 12

Panel or Module Type CCH

Splice Protectors Type Heat-shrink splice protection

Number of Splice Protectors 12

Connector Configuration SC

Mechanical Characteristics Dimensions (L x W x D) 162 mm x 35 mm x 200 mm (6.4 in x 1.4 in x 7.9 in)

CCH Pigtailed Splice Cassette 12 F, SC duplex, 50 µm multimode (OM3/4)

Product Specification CCH-CS12-E7-P00TE_NAFTA_AEN Page 2 | Revision date 2016-03-09

Design Adapter Adapter Type SC

Chemical Characteristics

RoHS Free of hazardous substances according to RoHS 2002/95/

EG

Ordering Information Part Number CCH-CS12-E7-P00TE

Product Description CCH Pigtailed Splice Cassette, 12 F, SC duplex, aqua, 50 µm multimode (OM3/4)

EAN Code 4056418151373

Shipping Information Units per Delivery 1/1

Dimensions (HxWxD) 5 cm x 20.3 cm x 36.8 cm (2 in x 8 in x 14.5 in)

CCH Pigtailed Splice Cassette 12 F, SC duplex, 50 µm multimode (OM3/4)

Product Specification CCH-CS12-E7-P00TE_NAFTA_AEN Page 3 | Revision date 2016-03-09

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.

All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.

Adaptable to use as a modular splice housing Splices are stored and protected in same footprint

Standards Approvals and Listings Meets ANSI/TIA/EIA-568A and 606

RoHS Free of hazardous sub-stances according to RoHS

2002/95/EG

UL-Listed United States and Canadian safety standards

Specifications

General Specifications Application Enterprise Networks, Data Center, Carrier Networks

Mounting Type Rack 19-in, Rack 23-in, Cabinet-mount

Product Type Fiber Optic Hardware

Environment Indoor

Mounting Technology Flush mount, Protruding, Recessed

Access Type Front and rear access slidable

Lockable Yes

Design - Hardware Housing Type CCH

Housing Color Black

Height Unit 4U

Locking Availability Front or rear

Number of Panels per Housing 12

Panel or Module Type CCH

Splice Tray Options CCH Splice Cassette (CCH-CS)

Mechanical Characteristics Dimensions (HxWxD) 17.8 cm x 48.3 cm x 43 cm (7 in x 19 in x 17 in)

Closet Connector Housing (CCH) four rack units, holds 12 CCH connector panels

Product Specification CCH-04U_NAFTA_AEN Page 2 | Revision date 2016-02-11

Ordering Information Part Number CCH-04U

Product Description Closet Connector Housing (CCH), four rack units, holds 12 CCH connector panels

EAN Code 4056418169439

Shipping Information Units per Delivery 1/1

Shipping Weight 7.5 kg (17 lb)

Dimensions (HxWxD) 58.42 cm x 58.42 cm x 30.48 cm (23 in x 23 in x 12 in)

Closet Connector Housing (CCH) four rack units, holds 12 CCH connector panels

Product Specification CCH-04U_NAFTA_AEN Page 3 | Revision date 2016-02-11

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.

All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.

Adaptable to use as a modular splice housing Splices are stored and protected in same footprint

Standards Approvals and Listings Meets ANSI/TIA/EIA-568A and 606

RoHS Free of hazardous sub-stances according to RoHS

2002/95/EG

UL-Listed United States and Canadian safety standards

Specifications

General Specifications Application Enterprise Networks, Data Center, Carrier Networks

Mounting Type Rack 19-in, Rack 23-in, Cabinet-mount

Product Type Fiber Optic Hardware

Environment Indoor

Mounting Technology Flush mount, Protruding, Recessed

Access Type Front and rear access slidable

Lockable Yes

Design - Hardware Housing Type CCH

Housing Color Black, transparent top cover

Height Unit 1U

Locking Availability Front or rear

Number of Panels per Housing Up to 2

Pigtail Length 2.25 m

Panel or Module Type CCH

Splice Tray Options CCH Splice Cassette (CCH-CS)

Housing Material Powder-coated metal and Polycarbonate Tray

Number of Ports Up to 24

Fiber Count Up to 48

Closet Connector Housing (CCH) one rack unit, holds two CCH connector panels

Product Specification CCH-01U_NAFTA_AEN Page 2 | Revision date 2016-02-12

Design - Hardware Cable entry type External and Internal strain-relief bracket

Number of splice cassettes Up to 2

Number of Adapters Up to 24

Number of pigtails Up to 48

Mechanical Characteristics Dimensions (HxWxD) 4.4 cm x 48.3 cm x 43 cm (1.75 in x 19 in x 17 in)

Weight 3.9 kg

Ordering Information Part Number CCH-01U

Product Description Closet Connector Housing (CCH), one rack unit, holds two CCH connector panels

EAN Code 4056418169491

Shipping Information Units per Delivery 1/1

Shipping Weight 4.5 kg (10 lb)

Dimensions (HxWxD) 54.61 cm x 57.15 cm x 19.05 cm (21.5 in x 22.5 in x 7.5 in)

Closet Connector Housing (CCH) one rack unit, holds two CCH connector panels

Product Specification CCH-01U_NAFTA_AEN Page 3 | Revision date 2016-02-12

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.

All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified.

Specifications

General Specifications Environment Indoor

Application General Purpose Horizontal, Vertical Riser, Plenum

Cable Type Tight-Buffered

Product Type Distribution

Flame Rating Plenum (OFNP)

Fiber Category 50 µm MM (OM4)

Temperature Range Storage -40 °C to 70 °C (-40 °F to 158 °F)

Installation 0 °C to 60 °C (32 °F to 140 °F)

Operation 0 °C to 70 °C (32 °F to 158 °F)

Cable Design Central Element Yarn

Fiber Count 12

Tight Buffer Color Blue, Orange, Green

Tensile Strength Elements and/or Armoring - Layer 1 Dielectric strength members

Tight Buffer Color, Layer 2 Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua

Tensile Strength Elements and/or Armoring - Layer 2 Dielectric strength members

Number of Ripcords 1

Outer Jacket Material Flame-retardant

Outer Jacket Color Aqua

Mechanical Characteristics Cable Max. Tensile Strength, Short-Term 440 N (100 lbf)

Max. Tensile Strength, Long-Term 132 N (30 lbf)

Nominal Outer Diameter 6.1 mm (0.24 in)

Weight 37 kg/km (26 lb/1000 ft)

Min. Bend Radius Installation 92 mm (3.6 in)

Min. Bend Radius Operation 31 mm (1.2 in)

MIC® Tight-Buffered Cable, Plenum 12 F, 50 µm multimode (OM4)

Product Specification 012T88-33190-29_NAFTA_AEN Page 2 | Revision date 2014-08-16

Fiber Specifications

Optical Characteristics (cabled) Fiber Core Diameter 50 µm

Fiber Category OM4

Fiber Code T

Performance Option Code 90

Wavelengths 850 nm / 1300 nm

Maximum Attenuation 2.8 dB/km / 1.0 dB/km

Serial 1 Gigabit Ethernet 1100 m / 600 m

Serial 10 Gigabit Ethernet 550 m / -

Min. Overfilled Launch (OFL) Bandwidth 3500 MHz*km / 500 MHz*km

Minimum Effective Modal Bandwidth (EMB) 4700 MHz*km / -

Ordering Information Part Number 012T88-33190-29

Product Description MIC® Tight-Buffered Cable, Plenum, 12 F, 50 µm multimode

(OM4)

MIC® Tight-Buffered Cable, Plenum 12 F, 50 µm multimode (OM4)

Product Specification 012T88-33190-29_NAFTA_AEN Page 3 | Revision date 2014-08-16

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.

Corning Optical Communications is ISO 9001 certified. © 2014 Corning Optical Communications. All rights reserved.