A22_-_W912EQ17T0030_Solicitation_-__EEY_Pest_Control.pdf

SEE ADDENDUM

(No Collect Calls)

W912EQ17T0030 28-Aug-2017

b. TELEPHONE NUMBER

901-544-0780

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 12 Sep 2017

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912EQ9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

KENDELL M RILEY

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

W38XGR71927351

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

US ARMY ENGINEER DISTRICT, MEMPHIS

KENDELL RILEY

167 N. MAIN STREET

KENDELL.M.RILEY@USACE.ARMY.MIL

MEMPHIS TN 38103-1894

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W38XGR 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

W2R9 ENDIST MEMPHIS

USACE ENSLEY ENGINEER YARD

2915 RIVERPORT ROAD

MEMPHIS TN 38109-3018

TEL: 901-785-6355 FAX:

FAX:

TEL: 901-544-0780 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$11,000,000

NAICS:

561710

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF59

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 12 Months Base Year - Pest Mangement Program

FFP

The Contractor shall furnish all supervision, labor, materials, and equipment necessary to accomplish the monitoring, trapping, pesticide application, and pest removal components of the IPM program. The Contractor shall also provide detailed, site-specific recommendations for structural and procedural modifications to aid in pest prevention.

FOB: Destination

MILSTRIP: W38XGR71927351

PURCHASE REQUEST NUMBER: W38XGR71927351

NET AMT

1001 12 Months OPTION Option Year I - Pest Mangement Program

FFP

The Contractor shall furnish all supervision, labor, materials, and equipment necessary to accomplish the monitoring, trapping, pesticide application, and pest removal components of the IPM program. The Contractor shall also provide detailed, site-specific recommendations for structural and procedural modifications to aid in pest prevention.

FOB: Destination

2001 12 Months OPTION Option Year II - Pest Mangement Program

FFP

The Contractor shall furnish all supervision, labor, materials, and equipment necessary to accomplish the monitoring, trapping, pesticide application, and pest removal components of the IPM program. The Contractor shall also provide detailed, site-specific recommendations for structural and procedural modifications to aid in pest prevention.

3001 12 Months OPTION Option Year III - Pest Mangement Program

FFP

The Contractor shall furnish all supervision, labor, materials, and equipment necessary to accomplish the monitoring, trapping, pesticide application, and pest removal components of the IPM program. The Contractor shall also provide detailed, site-specific recommendations for structural and procedural modifications to aid in pest prevention.

4001 12 Months OPTION Option Year IV - Pest Mangement Program

FFP

The Contractor shall furnish all supervision, labor, materials, and equipment necessary to accomplish the monitoring, trapping, pesticide application, and pest removal components of the IPM program. The Contractor shall also provide detailed, site-specific recommendations for structural and procedural modifications to aid in pest prevention.

INSTRUCTIONS TO OFFERORS

NOTICE TO OFFERORS

A. The following documentation must be submitted with your quote for evaluation.

1. SF 1449, Solicitation, Offer and Award; include your signature, name, title, date, include prompt payment terms, remittance address, Tax Identification Number, DUNS number, and Cage Code.

2. Schedule of prices

3. Representations and Certifications. (FAR Clauses 52.212-3) (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically)

4. amendments must be acknowledged

5. Review and submit the required information from FAR clauses 52.212-2

B. Offerors ADDRESS - Prospective Offerors should indicate in the offer, the address to which payment and/or correspondence should be mailed, if such address is different from that shown for the offeror on Standard Form 1449 Block 17a.

C. System for Award Management - By submission of a quote, the Offeror acknowledges the requirement that prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from this quote. Lack of registration in the SAM database will make an Offeror ineligible for award. Contractors may obtain information on registration and annual confirmation requirements by calling 1-888-227-2423, or at: http://www.sam.gov.

D. Basis of Award - The Government intends to award a award (1) Firm Fixed Price Purchase Order from this solicitation.to the responsible contractor whose offer conforming to the solicitation will be most advantageous to the Government based on Technical Capability, Price, and Past Performance. See Performance Work Statement, and Evaluation Criteria specified in FAR Clause 52.212-2, Evaluation of Commercial Items, of this solicitation.

E. How to submit questions: Questions should be emailed to the Contract Specialist, Kendell.M.Riley@usace.army.mil and a response will be provided.

F. How to submit Proposal: Contractor may submit an electronic offer to the following email addresses no later than the stated due date and time in block 8 of the SF 1449. Submit and electronic offer to Kendell.M.Riley@usace.army.mil. You may also deliver hand carried offers to 167 N. Main Street, Memphis TN 38103 and must be time stamped no later than the stated due date in block 8 of the SF 1449. Submission of offers via fax will not be accepted.

G. Site Visit Scheduled: A formal Site Visit is scheduled for September 6, 2017 at 10:00AM CST. Please contact the Contract Specialist prior to the site visit date if you plan to attend.

The site visit will be held at Ensley Engineering Yard, See blck #15 of the SF 1449 details.

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

SCOPE OF WORK:

Integrated Pest Management Program Ensley Engineer Yard

1. GENERAL:

A. Description of Program:

This specification is part of a comprehensive Integrated Pest Management (IPM) program for Ensley Engineer Yard, 2915 Riverport Road, Memphis, Tennessee 38109. IPM is a process for achieving long-term, environmentally sound pest suppression and prevention through the use of a wide variety of technological and management practices. Control strategies in an IPM program include:

Structural and procedural modifications to reduce food, water, harborage, and access used by pests.

Pesticide compounds, formulations and application methods that present the lowest potential hazard to humans and the environment.

Non-pesticide technologies such as trapping and monitoring devices.

Coordination among all facilities management programs that have a bearing on the pest control effort.

B. Contractor Service Requirements: The Contractor shall furnish all supervision, labor, materials, and equipment necessary to accomplish the monitoring, trapping, pesticide application, and pest removal components of the IPM program. The Contractor shall also provide detailed, site-specific recommendations for structural and procedural modifications to aid in pest prevention.

C. Schedule of Buildings: The schedule of buildings listed below shall be the minimum that are to be serviced in accordance with the Pest Control plan as noted in section 4.

1. Administration – Building 1 (+/- 8500 sq ft)

2. Yard and Docks including Guard Tower – Building 2 (+/- 2185 sq ft)

3. Main Shop – Building 3 (+/- 2030 sq ft)

4. Carpenter/Electric/Electronics/Pipe Shop – Building 5 (+/- 4220 sq ft)

5. Operations Supply Warehouse, including ULA Offices - Building 8 (+/- 1740 sq ft)

6. Occupational health Clinic/Safety Office – Building 10 (+/- 2100 sq ft)

7. Heavy Equipment/Outboard Engine and Boat Repair – Building 20 (+/- 890 sq ft)

8. Guardhouse (Main Gate) – Building 11 (+/- 85 sq ft)

9. Outboard/General Storage—Building 17 (+/- 85 sq ft)

10. Dry Dock Control rooms—Dock 5801, Dock 1015, and Dock Rouse (+/- 300 sq ft combined)

11. String-out – Yard and Docks Office Barge, including main hold (+/- 250 sqft)

12. The equipment listed below shall receive service twice (once in March and once in May):

a. Dredge Hurley; Motor Vessel Ward; Motor Vessel Lusk; Motor Vessel Key Woods; and Crane Barge 9103, including main hold

b. Motor Vessel Grugett; and Special Barge 8501, including main hold

c. Grader Barge 4919, Mooring Barge 7401,Whirley Crane Barge, Barge 5801 (Tractor Shop), all including main hold

2. PESTS INCLUDED AND EXCLUDED:

A. The Contractor Shall Adequately Suppress the Following Pests:

1. Indoor populations of rodents, insects, arachnids, and other anthropoids.

2. Outdoor populations of potentially indoor-infesting species that are within the property boundaries of the specified buildings.

3. Nests of stinging insects within the property boundaries of the specified buildings.

4. Individuals of all excluded pest populations that are incidental invaders inside the specified buildings, including winged termite swarmer’s emerging indoors.

B. Populations of the Following Pests are Excluded From This Contract:

1. Birds, bats, snakes, and all other vertebrates other than commensal rodents.

2. Termites and other wood-destroying organisms

3. Mosquitoes

4. Pests that feed primarily feed on outdoor vegetation.

3. INITIAL BUILDING INSPECTIONS:

The contractor shall complete a thorough, initial inspection of each building or site at least ten (10) working days prior to the starting date of the contract. The purpose of the initial inspections is for the Contractor to evaluate the pest control needs of all locations and to identify problem areas and any equipment, structural features, or management practices that are contributing to pest infestations. Access to building space shall be coordinated with the Contracting Officer’s Representative (COR). The COR will inform the Contractor of any restrictions or areas requiring special scheduling.

4. PEST CONTROL PLAN:

The contractor shall submit to the COR a Pest Control Plan at least five (5) working days prior to the starting date of the contract. Upon receipt of the Pest Control Plan, the COR will render a decision regarding its acceptability within two (2) working days. If aspects of the Pest Control Plan are incomplete or disapproved, the Contractor shall have two (2) working days to submit revisions. The contractor shall be on-site to perform the initial service visit for each building within the first five (5) working days of the contract.

The Pest Control Plan shall consist of five parts as follows:

A. Proposed Materials and Equipment for Service: The contractor shall provide current labels and Safety Data Sheets for all pesticides to be used, and brand names of pesticide application equipment, rodent bait boxes, insect and rodent trapping devices, pest monitoring devices, pest detection equipment, and any other pest control devices or equipment that may be used to provide service.

B. Proposed Methods for Monitoring and Detection: The Contractor shall describe methods and procedures to be use for identifying sites of pest harborage and access, and for making objective assessments of pest population levels throughout the term of the contract.

C. Service Schedule for Each Building or Site: The Contractor shall provide complete service schedules that include monthly frequency of Contractor visits, specific time of Contractor visits, and approximate duration of each visit. The contractor shall establish a routine time to perform the monthly treatments on the second Wednesday of every month. If the contractor is unable to come on the second Wednesday of the month, the contractor shall give the COR at least a seven day notice and the monthly treatment can be rescheduled plus/minus two days from the second Wednesday of that month, i.e. the second Monday, Tuesday, Thursday, or Friday can possibly be days that the treatment can be done pending COR approval.

D. Description of any Structural or Operational Changes That Would Facilitate the Pest Control Effort: The contractor shall describe site-specific solutions for observed source of pest food, water, harborage, and access. The site-specific solutions for observed pests shall be submitted along with a schedule indicating the anticipated abatement of the observed pests.

E. Commercial Pesticide Applicator Certificates or Licenses: The Contractor shall provide photocopies of State-issued Commercial Pesticide Applicator Certificates or Licenses for every Contractor employee who will be performing on-site service under this contract.

The contractor shall be responsible for carrying out work according to the approved Pest Control Plan. The Contractor shall receive the concurrence of the COR prior to implementing any subsequent changes to the approved Pest Control Plan, including additional or replacement pesticides and on-site service personnel.

5. RECORD KEEPING:

The Contractor shall be responsible for maintaining a pest control logbook or file for each building or site specified in this contract. These records shall be kept on-site and maintained on each visit by the Contractor. Each logbook or file shall contain at least the following items:

A. Pest Control Plan: A copy of the Contractor’s approved Pest Control Plan, including labels and MSDS sheets for all pesticides used in the building, brand names of all peat control devices and equipment used in the building, and the Contractors service schedule for the building.

B. GSA Forms 3638: Field Office copies of GSA Form 3638, Pest Control Work and

Inspection Report, or an equivalent. These forms will be used to advise the contractor of routine service requests and to document the performance of all work, including emergency work. Upon completion of a service visit to the building or site, the Contractor’s employee performing the service shall complete, sign, and date the Form 3638, and return it to the logbook or file in the same or succeeding day of the services rendered.

C. Contractor’s Service Report Forms: Customer copies of the Contractor’s Service Report Form, documenting all information on pesticide application required by statute in the jurisdiction where service is actually performed. These forms shall not be mandatory if all required information on pesticide application is included on the GSA Pest Control Work and Inspection Report.

6. MANNER AND TIME TO CONDUCT SERVICE:

A. Time Frame of Service Visits: The Contractor shall perform routine pest control services that do not adversely affect tenant health or productivity during the regular hours of operation in buildings. When it is necessary to perform work outside of the regularly scheduled service time set forth in the Pest Control Plan, the Contractor shall notify the COR at least seven (7) days in advance.

B. Safety and Health:

1. The contractor shall observe all safety precautions throughout the performance of this contract. All work shall be in strict accordance with all applicable Federal, state, and local safety and health requirements.

Where there is a conflict between applicable regulations, the most stringent will apply.

2. The contractor shall assume full responsibility and liability for compliance with all applicable regulations pertaining to the health and safety of personnel during the execution of work.

C. Special Entrance: Certain areas within some buildings may require special instructions for persons entering them. Any restrictions associated with these special areas will be explained by the COR. The Contractor shall adhere to these restrictions and incorporate them into the Pest Control Plan.

D. Uniforms and Protective Clothing: All Contractor personnel working in or around buildings specified in this contract shall wear distinctive uniform clothing. The Contractor shall determine the need for and provide any personal protective items required for the safe performance of work. Protective clothing, equipment, and devices shall, as a minimum, conform to U.S. Occupational Safety and Health Administration (OSHA) standards for the products being used.

E. Vehicles: Vehicles used by the Contractor shall be identified in accordance with state and local regulations.

7. SPECIAL REQUEST AND EMERGENCY SERVICE:

On occasion, the COR may request that the Contractor perform corrective, special, or emergency service(s) that are beyond routine requests. The Contractor shall respond to these exceptional circumstances and complete the necessary work within three (3) hours after receipt of the request.

8. CONTRACTOR PERSONNEL

Throughout the term of this contract, all Contractor personnel providing on-site pest control service must maintain certification as Commercial Pesticide Applicators in the category of Industrial, Institutional, Structural, and Health Related Pest Control. Uncertified individuals working under the supervision of a Certified Applicator will not be permitted to provide service under this contract.

9. USE OF PESTICIDES

The Contractor shall be responsible for application of pesticides according to the label. All pesticides used by the Contractor must be registered with the U.S. Environmental Protection Agency (EPA), state and/or local jurisdiction. Transport, handling, and use of all pesticides shall be in strict accordance with the manufacturer’s label instructions and all applicable Federal, state, and local laws and regulations.

The Contractor shall adhere to the following rules for pesticide use:

A. Approved Products: The Contractor shall not apply any pesticide product that has not been included in the Pest Control Plan or approved in writing by the COR. All pesticide products mixed in the spray tank that will improve the efficiency and the effectiveness of the chemicals, including sticking agents, wetting agents, and etcetera must consist of a minimum of 50% Bio-based content.

B. Pesticide Storage: The Contractor shall not store any pesticide product in the buildings specified in this contract.

C. Application by Need: Pesticide application shall be according to need and not by schedule. As a general rule, application of pesticides in any inside or outside area shall not occur unless visual inspection or monitoring devices indicate the presence of pests in that specific area. Request for preventive pesticide treatments in areas where surveillance indicates a potential insect or rodent infestation will be evaluated by the COR on a case-by-case basis. Written approval must be granted by the COR prior to any preventive pesticide application.

D. Minimization of Risk: When pesticide use is necessary, the Contractor shall employ the least hazardous material, most precise application technique, and minimum quantity of pesticide necessary to achieve control.

10. INSPECTION CONTROL

A. Emphasis on Non-Pesticide Methods: The Contractor shall use non-pesticide methods of control whenever possible. For Example:

1. Portable vacuums rather than pesticide sprays shall be the standard method for initial cleanouts of cockroach infestations, for swarming (winged) ants and termites, and the control of spiders in webs.

2. Trapping devices rather than pesticide sprays shall be the standard method for indoor fly control.

B. Application of Insecticides to Cracks and Crevices: As a general rule, the Contractor shall apply all insecticides as “crack and crevice’ treatments only, defined in this contract as treatments in which the formulated insecticide is not visible to a bystander during or after the application process.

C. Application of Insecticides to Exposed Surfaces or as Space Sprays: Application of insecticides to exposed surfaces or as space sprays (“fogging”) shall be restricted to exceptional circumstances where no alternative measures are practical. The Contractor shall obtain approval of the COR prior to any application of insecticide to an exposed surface or any space spray treatment. No surface application or space spray shall be made while tenant personnel are present. The Contractor shall take all necessary precautions to ensure tenant and employee safety, and all necessary steps to ensure the containment of the pesticide on the site of application.

D. Insecticide Bait Formulations: Bait formulations shall be the standard pesticide technology for cockroach and ant control, with alternate formulations restricted to unique situations where baits are not practical.

E. Monitoring: Sticky traps shall be used to guide and evaluate indoor insect control efforts where necessary.

11. RODENT CONTROL

A. Indoor Trapping: As a general rule, rodent control inside buildings shall be accomplished with trapping devices only. All such devices shall be concealed out of general view and in protected areas so as not to be affected by routine cleaning and other operations. Trapping devices shall be checked on a schedule approved by the COR. The Contractor shall be responsible for disposing of all trapped rodents and all rodent carcasses in an appropriate manner.

B. Use of Rodenticides: In exceptional circumstances, when rodenticides are deemed essential for adequate rodent control inside buildings, the Contractor shall obtain approval of the COR prior to making any interior rodenticide treatment. All rodenticides, regardless of packaging, shall be placed either in locations not accessible to children, pets, wildlife, and domestic animals, or in EPA-approved tamper-resistant bait boxes. As a general rule, rodenticide application outside buildings shall emphasize the direct treatment of rodent burrows wherever feasible.

C. Use of Bait Boxes: All bait boxes shall be maintained in accordance with EPA regulations, with an emphasis on the safety of non-target organisms. The Contractor shall adhere to the following five points:

1. All bait boxes shall be placed out of the general view, in locations where they will not be disturbed by routine operations.

2. The lids of all bait boxes shall be securely locked or fastened shut.

3. All bait boxes shall be securely attached or anchored to floor, ground, wall, or other immovable surface, so that the box cannot be picked up or moved.

4. Bait shall always be secured in the feeding chamber of the box and never placed in the runway or entryways of the box.

5. All bait boxes shall be labeled on the inside with the Contractor’s business name and address, and dated by the Contractor’s technician at the time of installation and each servicing.

12. STRUCTURAL MODIFICATIONS AND RECOMMENDATIONS

Throughout the term of this contract, the Contractor shall be responsible for advising the COR about any structural, sanitary, or procedural modifications that would reduce pest food, water, harborage, or access. The Contractor shall be responsible for adequately suppressing all pests included in this contract regardless of whether or not the suggested modifications are implemented. The Contractor will not be held responsible for carrying out structural modifications as part of the pest control effort. However, minor applications of caulk and other sealing materials by the Contractor to eliminate pest harborage or access may be approved by the COR on a case by case basis. The Contractor shall obtain the approval of the COR prior to any application of sealing material or other structural modification.

13. PROGRAM EVALUATION:

The COR will continually evaluate the progress of this contract in terms of effectiveness and safety, and will require such changes as necessary. The Contractor shall take prompt action to correct all identified deficiencies.

14. ADDITIONAL TREATMENTS AND RECORD KEEPING:

Additional treatments for populations of excluded pests (paragraph 2.B) may be requested at any time throughout the life of this contract on an as needed basis. Record keeping for additional treatments shall be in accordance with paragraph 5. Payment for additional treatments may be made by Government credit card.

15. ADDITIONAL REQUIREMENTS:

Additional requirements may be added in accordance with Federal/DOD/Army/Corps Acquisition Regulations. In event of conflict of between these specifications and the Acquisition Regulations, the Acquisition Regulations shall govern.

16. SUSTAINABILITY:

Safer Choice The contractor shall provide Safer Choice labeled products under this contract, as applicable. The contractor is encouraged to visit http://www2.epa.gov/saferchoice/products for updated lists of qualifying products.

Bio-based The United States Department of Agriculture (USDA) designates certain bio-based products for federal procurement and specifies minimum bio-based content levels for those products. Any designated product that is being offered or supplied under this contract shall meet USDA Bio-Preferred’s minimum bio-based content level.

Visit https://www.biopreferred.gov/BioPreferred/faces/pages/ProductCategories.xhtml for the complete list of designated products and the associated minimum bio-based content level requirements.

17. SECURITY REQUIREMENTS:

The Contractor shall be responsible for safeguarding all government equipment, information and property provided for Contractor use, if needed. Will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas. All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or restricted areas. All Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provide by government representative). The Contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshall Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

18. PRESCREEN CANDIDATES USING E-VERIFY PROGRAM:

The Contractor must pre-screen Candidates using the E-verify Program (http://www.dhs.gov/E-Verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible candidates must be provided to the COR no later than 3 business days after the initial contract award.

19. CONTRACTING OFFICER REPRESENTATIVE (COR):

The (COR) will be Boyd R. Mullins. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: 1) assure that the Contractor performs the technical requirements of the contract; 2) perform inspections necessary in connection with contract performance ; 3) maintain written and oral communications with the Contractor concerning technical aspects of the contract; 4) issue written interpretations of technical requirements, including Government drawings, designs, specifications; 5) monitor Contractor’s performance and notifies both the Contracting Office and Contractor of any deficiencies; and 6) coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

20. KEY PERSONNEL:

The following personnel are considered key personnel by the Government: Robert Shover, Safety Officer;

Boyd R. Mullins, COR / Senior Plant Inspector; Dan Kelley, QA / General Facilities & Equipment Specialist. The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the Contracting Officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available as needed Monday through Friday except Federal holidays or when the government facility is closed for administrative reasons.

21. IDENTIFICATION OF CONTRACTOR EMPLOYEES:

All contract personnel attending meetings, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.

22. CONTRACTOR TRAVEL:

Contractor shall be responsible for all travel cost associated with this contract.

23. ORGANIZATIONAL CONFLICT OF INTEREST:

Contractor and subcontractor personnel performing work under this contract may not receive, have access to or participate in the development of proprietary or source selection information (e.g. cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 25-SEP-2017 TO

24-SEP-2018

N/A W2R9 ENDIST MEMPHIS

USACE ENSLEY ENGINEER YARD

2915 RIVERPORT ROAD

MEMPHIS TN 38109-3018

901-785-6355

W38XGR

1001 POP 25-SEP-2018 TO

24-SEP-2019

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 25-SEP-2019 TO

24-SEP-2020

N/A (SAME AS PREVIOUS LOCATION)

3001 POP 25-SEP-2020 TO

24-SEP-2021

N/A (SAME AS PREVIOUS LOCATION)

4001 POP 25-SEP-2021 TO

24-SEP-2022

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.212-1 Instructions to Offerors--Commercial Items JAN 2017 52.223-1 Biobased Product Certification MAY 2012 52.223-2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts

SEP 2013

52.228-5 Insurance - Work On A Government Installation JAN 1997

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.237-2 Protection Of Government Buildings, Equipment, And Vegetation

APR 1984

252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.225-7001 Buy American And Balance Of Payments Program-- Basic (Dec 2016)

DEC 2016

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

JUN 2012

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

All quotes submitted will be evaluated for (1) Technical Acceptability, (2) Satisfactory Past Performance, and (3) Price. The government will issue award to the Offeror whose quote is the Lowest Price of those determined to meet at least the minimum requirements to be determined technically acceptable & that demonstrates satisfactory past performance.

Submittals;

It is incumbent upon the offeror to submit sufficient information for the Government to make a determination of your technical acceptability, satisfactory past performance and price. Failure to submit sufficient information for the government to determine your technical acceptability, satisfactory past performance or price may be cause for rejection of your quote.

(1) Technical Acceptability - to be determined technically acceptably offerors shall submit for evaluation, documentation of their capability to provide the specified services in accordance with the project Scope-of- Work, including but not limited to, the capability to provide the services specified, and in accordance with the specified delivery schedule.

(2) The contractor shall provide sufficient documentation of their technical capability, by including technical literature, brochures, equipment list, Key Personnel List, Resumes, or any other information to enable the Government to determine the offeror’s capability to perform work.

(3) Satisfactory Past Performance - to demonstrate satisfactory past performance the offeror shall provide documentation of satisfactory performance on past or current contracts of a similar type, size, scope and complexity, as well as, provide references, including names and contact information of references who can verify their past performance. Past performance information of key personnel and crew may be provided if the company has limited or no past performance. In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available, the offeror will be evaluated as neutral on Past Performance, providing the offeror supplies a certified statement with their offer that no past performance information is available.

The Government’s approach to evaluating past performance is to check the references provided by the contractor to verify satisfactory past performance as well as data obtained from other sources available i.e. government database, past contract files, etc. The offeror is cautioned that while the Government will consider data from other sources, the burden of demonstrating satisfactory past performance rests with the offeror.

It is incumbent upon the offeror to submit sufficient documentation and information for the Government to determine technical acceptability, satisfactory past performance and proposed price. Failure to submit sufficient information for the government to determine technical acceptability, past performance or price may be cause for rejection of your quote.

(3) Price - Price quotes will be examined to determine the extent to which proposed prices are comparable with the Government estimates, and previous procurement history and a determination made of Price Reasonableness. The Government may reject any quote that is determined to be Not Fair and Reasonable, unrealistically high or low in price when compared to Government estimates, or are unbalanced, such that the quote is deemed to reflect an inherent lack of competence or failure to comprehend the requirements. All quotes will be evaluated and a determination made of lowest price, from prices presented on the Bidding Schedule, based on the Total of all line items.

SAM Registration:

All offerors shall be registered in the System for Award Management (SAM), if you are not registered in (SAM), an award CANNOT be made to your company. You may register electronically at http://www.sam.gov.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JAN 2017)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision --

“Administrative merits determination” means certain notices or findings of labor law violations issued by an enforcement agency following an investigation. An administrative merits determination may be final or be subject to appeal or further review. To determine whether a particular notice or finding is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“Arbitral award or decision” means an arbitrator or arbitral panel determination that a labor law violation occurred, or that enjoined or restrained a violation of labor law. It includes an award or decision that is not final or is subject to being confirmed, modified, or vacated by a court, and includes an award or decision resulting from private or confidential proceedings. To determine whether a particular award or decision is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“Civil judgment” means—

(1) In paragraph (h) of this provision: A judgment or finding of a civil offense by any court of competent jurisdiction.

(2) In paragraph (s) of this provision: Any judgment or order entered by any Federal or State court in which the court determined that a labor law violation occurred, or enjoined or restrained a violation of labor law. It includes a judgment or order that is not final or is subject to appeal. To determine whether a particular judgment or order is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“DOL Guidance” means the Department of Labor (DOL) Guidance entitled: ``Guidance for Executive Order 13673, `Fair Pay and Safe Workplaces' ''. The DOL Guidance, dated August 25, 2016, can be obtained from www.dol.gov/fairpayandsafeworkplaces.

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Enforcement agency” means any agency granted authority to enforce the Federal labor laws. It includes the enforcement components of DOL (Wage and Hour Division, Office of Federal Contract Compliance Programs, and Occupational Safety and Health Administration), the Equal Employment Opportunity Commission, the Occupational Safety and Health Review Commission, and the National Labor Relations Board. It also means a State agency designated to administer an OSHA-approved State Plan, but only to the extent that the State agency is acting in its capacity as administrator of such plan. It does not include other Federal agencies which, in their capacity as contracting agencies, conduct investigations of potential labor law violations. The enforcement agencies associated with each labor law under E.O. 13673 are--

(1) Department of Labor Wage and Hour Division (WHD) for--

(i) The Fair Labor Standards Act;

(ii) The Migrant and Seasonal Agricultural Worker Protection Act;

(iii) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act;

(iv) 41 U.S.C. chapter 67, formerly known as the Service Contract Act;

(v) The Family and Medical Leave Act; and

(vi) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors);

(2) Department of Labor Occupational Safety and Health Administration (OSHA) for--

(i) The Occupational Safety and Health Act of 1970; and

(ii) OSHA-approved State Plans;

(3) Department of Labor Office of Federal Contract Compliance Programs (OFCCP) for--

(i) Section 503 of the Rehabilitation Act of 1973;

(ii) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974; and

(iii) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity);

(4) National Labor Relations Board (NLRB) for the National Labor Relations Act; and

(5) Equal Employment Opportunity Commission (EEOC) for--

(i) Title VII of the Civil Rights Act of 1964;

(ii) The Americans with Disabilities Act of 1990;

(iii) The Age Discrimination in Employment Act of 1967; and

(iv) Section 6(d) of the Fair Labor Standards Act (Equal Pay Act).

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Labor compliance agreement” means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters.

“Labor laws” means the following labor laws and E.O.s:

(1) The Fair Labor Standards Act.

(2) The Occupational Safety and Health Act (OSHA) of 1970.

(3) The Migrant and Seasonal Agricultural Worker Protection Act.

(4) The National Labor Relations Act.

(5) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act.

(6) 41 U.S.C. chapter 67, formerly known as the Service Contract Act.

(7) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity).

(8) Section 503 of the Rehabilitation Act of 1973.

(9) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974.

(10) The Family and Medical Leave Act.

(11) Title VII of the Civil Rights Act of 1964.

(12) The Americans with Disabilities Act of 1990.

(13) The Age Discrimination in Employment Act of 1967.

(14) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors).

(15) Equivalent State laws as defined in the DOL Guidance. (The only equivalent State laws implemented in the FAR are OSHA-approved State Plans, which can be found at www.osha.gov/dcsp/osp/approved_state_plans.html).

“Labor law decision” means an administrative merits determination, arbitral award or decision, or civil judgment, which resulted from a violation of one or more of the laws listed in the definition of ``labor laws''.

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L.