A22_-_SOW.pdf

Memphis District Hydraulics and Hydrology Branch (CEMVM‐EC‐H)

Multi‐Beam Survey System Specifications

DESCRIPTION:

Supply a shallow water (<300 m) broadband multi‐beam echo‐sounder system suitable for water surveying including two compatible professional survey PC systems, as well as all cables, power cords, mounting brackets and hardware necessary for installation. The multi‐beam echo‐ sounder system shall have the following performance specifications, equal or better than an

R2SONIC 2024 Wideband Multi‐Beam Echo‐Sounder System. The system must be compatible with an existing Applanix MV 320 POS and existing HYPACK data collection software. The

Government reserves the right to award to the supplier whose quotation or offer represents the best value to the Government.

MANDATORY SYSTEM REQUIREMENTS:

1. The wideband multi‐beam echo‐sounder must operate over a frequency range of 200 kHz to 400 kHz with at least 20 frequency selections available over this range (available in equal incremental steps), selectable in real time.

2. The wideband multi‐beam echo‐sounder must additionally provide selectable 700 kHz operation.

3. The wideband multi‐beam echo‐sounder must provide a minimum of 256 dynamically focused beams with user selectable equiangular or equidistant beam spacing.

4. The wideband multi‐beam echo‐sounder must provide narrow dynamically focused beam widths as follows (receive and transmit, respectively):

1° x 2° at 200 kHz selectable operation 0.5° x 1° at 400 kHz selectable operation 0.3°x 0.6° at 700 kHz selectable operation

5. The wideband multi‐beam echo‐sounder must offer a signal bandwidth of 60 kHz with a system range resolution of 1.25 cm for improved resolution and accuracy of the multi‐beam soundings and the quality of the resultant imagery.

TRADE IN:

Hydraulics and Hydrology Branch will be trading in a used 2008 RESON SeaBat 7101 multi‐beam echo‐sounder that we would like each vendor to consider in the proposal of their final price.

DATE OF DELIVERY:

Delivery is needed by 20 January 2016.

PLACE OF DELIVERY:

Please deliver all system components to Ensley Engineer Yard, 2915 Riverport Road, Memphis, TN 38109. POC for delivery is Mark Manning, 901‐484‐0736. Supplier is to contact Mark ahead of time and schedule a delivery date and time.

ADDITIONAL SECURITY REQUIREMENTS:

All contractor and all associated sub‐contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204‐9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

Contractor and all associated sub‐contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC‐III) and Terrorist Screening Database (TSDB) (Army Directive 2014‐05 / AR 190‐13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

The Contractor must pre‐screen Candidates using the E‐verify Program (http://www.uscis.gov/e‐verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E‐ verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award.