17-Q-0063_6_April_2017.pdf

SEE ADDENDUM

(No Collect Calls)

W912CN-17-Q-0063 06-Apr-2017

b. TELEPHONE NUMBER

808.656.0953

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 12 Apr 2017

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912CN9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

SUSAN SHAFII

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

EXPEDITIONARY CONTRACTING COMMAND

413 CSB, RCO-HAWAII,

742 SANTOS DUMONT AVENUE

BLDG 108, 3RD FLOOR (WAAF)

SCHOFIELD BARRACKS HI 96857

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W917AD 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

0025 IN HHC 03 HEADQUARTERS IN

CPT STANLEY T. KARETA

1640 WAIANAE RD

SCHOFIELD BARRACKS HI 96858

TEL: 413-813-8016 FAX:

FAX:

TEL: 808-656-1002 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339920

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF73

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912CN-17-Q-0063

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1,008 Each FSC 7810 Flooring Tiles

FFP

Ultimate RB Zip Tiles or Equal with the following Salient Characteristics:

a) Dimensions: Each tile is 28.5 inches x 28.5 inches and at least 0.375 inch thick

b) Material: Rubber; slip resistant

c) Tiles must interlock and hold securely without the need for adhesives, tape, or skilled labor to install.

d) Must be able to use disinfectant to clean surface

e) Color: Black with Red Flecks FOB: Destination

NET AMT

0002 10 Each FSC 7810 Weightlifting Bar, Men

FFP

American Barbell Brand Olympic Weightlifting Bar (men feet) (Part Number OB20-CH-NB) or Equal with the following Salient Characteristics:

a) 20 kilograms

b) Diameter = 28 millimeters

c) Knurl marks = Olympic

d) Center knurl = no

e) Shaft coating = black zinc or polished chrome or stainless steel

f) Tensile strength = 190k PSI

e) Sleeve coating = chrome

h) Sleeve construction = precision machined

i) Bushing/bearing = bus *** Must be compatible with the line item number 0005 proloc collars****

Susan.Shafii Highlight

0003 2 Each FSC 7810 Weightlifting Bar, Women

FFP

American Barbell Brand Olympic Weightlifting Bar (women feet) (Part Number OB15-CH-NB) or Equal with the following Salient Characteristics:

a)15 kilograms

b) Diameter = 25 millimeters

c) Knurl marks = Olympic

d) Center knurl = no

e) Shaft coating = black zinc or polished chrome or stainless steel

f) Tensile strength = 190k PSI

g) Sleeve coating = chrome

h) Sleeve construction = precision machined

i) Bushing/Bearing = bushing ***Must be compatible with the line item number 0005 proloc collars****

0004 2 Each FSC 7810 Technique Bar

FFP

American Barbell Brand 5kg Technique Bar (Part Number ATB-5) or Equal with the following Salient Characteristics:

a) 5kg bar weight

b) Sleeve length > 9 1/8”

c) Distance between Collars > 51.5 inches

d) Diameter = 25 millimeters

e) Knurl marks = Olympic

f) Center knurl = no g)Shaft coating = aluminum h)loadable sleeve length > 9.25 inches i)Sleeve coating = aluminum j)Bushing/Bearing = bushing or bearin

0005 20 Pair FSC 7810 Proloc Collars

FFP

American Barbell Brand Proloc Collars (Part Number CLR-REG) or Equal with the following Salient Characteristics:

a) Lock-in design which maintains a consistent, secure hold ****Must be compatible with the line item numbers 0002 weightlifting bar, men and 0003 weightlifting bar, women******

0006 7 Set FSC 7810 Bumper Plate Set

FFP

Rogue Fitness Brand 350 LB Bumper plate set (Part Number IP0114-350) or Equal with the following Salient Characteristics:

a) 350 lb set

b) Diameter = 450 millimeters (+/- 3 millimeters ) / 17.72 inches (IWF Standard)

c) Collar Opening = 50.40 millimeters / 1.98 inches

d) Stainless Steel Inserts

e) Weight Tolerance: +/- 1% of claimed weight

f) Minimal Bounce

g) Material: Rubber ******Must be compatible with line item number 0011 hexagon bar*********

0007 2 Each FSC 7810 Mammoth Half Rack

FFP

American Barbell Brand Mammoth Half Rack (Part Number ECORG-HR) or Equal with the following Salient Characteristics:

a) No larger than 76 inches x 49 inches x 90 inches L x W x H

b) Must have four or more adjustable bumper plate storage posts at the back of the rack on an upright that is separate from the upright that supports the barbell

c) Area for squatting must be contained by steel uprights fore and aft of the barbell

d) Has adjustable safety bars/straps safety spotter arms to catch a dropped barbell off the rack

e) Must come with two (2) x adjustable J-cups to support a barbell, J-cups have rubberized padding to protect bar knurling.

f) Must have at least one steel cross members between uprights on the top of the rack to increase rack stability.

g) Barbell height is adjustable in increments no larger than 2 inches

h) All uprights have holes for attachments

i) Must support ability to bench press in rack with separate bench

j) Must have a pull up bar on top front side of rack

k) Must not need to be bolted to the floor

l) If color customizable, red and black colors ******Must be compatible with the line item numbers 0015 climbing ropes, 0016 gymnastics rings, 0017 dip bar*********

0008 2 Each FSC 7810 Deadlift Bar Jack

FFP

Rogue Fitness Brand Deadlift Bar Jack (Part Number RA0041) or Equal with the following Salient Characteristics:

a) Dimensions no larger than 18.5 inches x 4.5 inches x 11.75 inches L x W x H

b) Steel note = 2 inches x 2 inches 11-gauge steel

c) Must include protective plastic where its supports the barbell to protect barbell knurling

0009 2 Each FSC 7810 Glute-Ham Developer

FFP

American Barbell Brand Glute-Ham Developer (Part Number GHDB-SM) or Equal with the following Salient Characteristics:

a) Includes = 3/16 inches thick steel, = 20 inches x 14 inches foot plate

b) Has a single piece chassis along the length of the GHD to increase stability during intense use

c) Has a minimum of 10 slots for adjusting distance between hip and foot pads

d) Includes 4 x spinning foam roller foot pads with minimum dimensions: 8 5/8 inches length x 5 inches diameter. Pads must be upholstered and height adjustable by 1 inch increments.

e) Include split-hip half-moon pad design with heavy duty moisture wicking upholstery

0010 3 Each FSC 7810 Adjustable Weight Bench

FFP

American Barbell Brand Adjustable Weight Bench or Equal with the following Salient Characteristics:

a) Must have wheels to ease movement of bench into a squat rack to be able to safely perform bench press lifting with safety stops

b) Adjustable = minimum 4 positions from 0-85 degrees

c) Dimensions = 48 inches x 11.25 inches (pad) x 17.5 inches L x W x H

d) Less than 1 inch gap between Seat/Back Pad

e) Must include rubber feet/caps for stability/floor protection

f) Pad Thickness = 2.5 inches

g) Material = 11 gauge steel

h) Upholstery = double-stitched naugahyde, wear-resistant

i) Finishing preference = black texture powder coat

j) Wheels = yes

k) Band pegs = no

l) Spotter steps = no

m) Color = black

0011 1 Each FSC 7810 Hexagon Bar

FFP

American Barbell Brand Hexagon Bar (Part Number SB-HX-R) or Equal with the following Salient Characteristics:

a) Must have two-horizontal handles and a metal frame able to load bumper plates onto each of the lateral bars of the item.

b) Two sets of knurled handles = 1.34 inches diameter, spaced 25 inches on centeran athlete can easily switch from one set of handles to the other simply by flipping the bar over.

c) Bar must weigh = 40 pounds

d) Schedule 80 pipe sleeves: 1.91 inches diameter, 16 inches loadable sleeve length.

e) Color= black/ powder coat ****** Item d Must be compatible with the line item number 0006*********

0012 2 Each FSC 7810 Treadmill

FFP

Woodway Curve Brand Treadmill or Equal with the following Salient Characteristics:

a) Non-motorized treadmill

b) Curved deck

c) Must include digital display of elapsed time and distance completed

d) Weight = 325 pounds

e) Length = 64 inches

f) Width = 36 inches

g) Height = 57 inches

h) Running Surface = 54 inches x 17 inches

0013 2 Each FSC 7810 Rowing Machine

FFP

Concept 2 Brand, Model D, PM5 rowing machine ( Part Number C20003-5) or Equal with the following Salient Characteristics:

a) Must enable total body aerobic endurance training using a movable seat, adjustable foot rests, and a flywheel.

b) Dimensions = 96 inches x 24 inches x 14 inches (seat) L x W x H

c) Power = user powered

d) Must have wheels to enable ease of mobility and able to be rotated 90 degrees for storage

e) Include performance monitor to enable athlete to track pace, time and distance

f) Must be capable of handling a max user weight of 500 pounds

0014 1 Each FSC 7810 24 Feet Battle Rig

FFP

American Barbell Brand 24' Battle Rig ( Part Number ECORG-24SA) or Equal with the following Salient Characteristics:

a) Must provide an athlete with the ability to conduct a wide range of fitness activities in a relatively compact space. This equipment also gives the facility the ability to do pullups and rope climbs without damaging historical ceilings and walls in the facility walls in the facility.

b) Contains 14 pullups stations around the perimeter.

c) Contains space and uprights for 6 squat racks

d) Comes with six (6) x pairs of J-cup attachments that hold the barbell

e) Rig has 36 inch extension kits on both outside cross members to support rope climbs and gym rings.

****Battle Rig Must be compatible with line item number 0015 climbing rope, 0016 gymnastics rings and 0017 dip bar and the J-cups compatible with Line item number 0007 half rack *******

0015 2 Each FSC 7810 Sisal Climbing Ropes

FFP

Apollo Athletics Brand Sisal Climbing Ropes or Equal with the following Salient Characteristics:

a) Length = 23 feet ******* Must be compatiable with line item number 0014 battle rig and 0007 half rack********

b) Diameter = 1.5 inches

c) Material Type = Manila or similar

d) Braided Eyelet = No mounting bracket required

0016 2 Pair FSC 7810 Gymnastic Wood Rings

FFP

Rogue Fitness Brand Gymnastic Wood Rings ( Part Number RA0022-RG) or Equal with the following Salient Characteristics:

a) Diameter = 1.25 inches

b) 1.5 inches Heavy Duty Black Nylon Straps with Buckle

c) 16 feet Strap with velco fasteners to keep excess strap in one place

d) Material Type = Heavy Duty Nylon

e) Weight = 4 pounds *** Must be compatible with line item number number 0007 half rack and 0014 battle rig*****

0017 4 Each FSC 7810 Dip Bar

FFP

American Barbell Brand 3x3 Dip Bar ( Part Number ECORG-DB) or Equal with the following Salient Characteristics:

a) Weight = 26 pounds

b) Length = 24 inches

c) Width = 27 inches

d) Height = 10 inches

e) Diameter = 1 7/8 inches

f) Steel note = 7-gauge steel **** Must be compatible with line item numbers 0007 half Rack and 0014 battle rig*****

0018 3 Each FSC 7810 Suspension Trainer

FFP

TRX Brand Suspension Trainer ( Part Mumber TRXhome-TC) or Equal with the following Salient Characteristics: a) Must have durable nylon webbing straps with loop-and-barrel locking adjusters and a carabiner tested at 1,300 pounds.

0019 5 Each FSC 7810 Stability Ball

FFP

Powermax Brand Stability Ball ( Part Number TA1806 Rouge) or Equal with the following Salient Characteristics:

a) 65 centimeters

b) Able to support 500 pounds of weight

0020 4 Set FSC 7810 Hurdle Set

FFP

Indoor Coaching Hurdle Set ( Part Number PER4MQH) or Equal with the following Salient Characteristics:

a) Must be indoor capable for agility training

b) 8-12" adjustable hurdles

c) Bases for indoor use

d) 4 set of 5 hurdles total of 20 hurdles

0021 3 Set FSC 7810 Dumbbell Set

FFP

PowerBlock Brand Elite 90 pounds Dumbbell Set ( Part Number U090) or Equal with the following Salient Characteristics:

a) Weight range of 5-90 pounds per hand

b) Increments achieved: 2.5, 5, 10, 15, 17.5, 20, 25, 27.5, 30, 35, 37.5, 40, 45, 47.5, 50, 55, 57.5, 60, 65, 67.5, 70, 75, 77.5, 80, 85, 87.5, and 90 pounds per hand

c) Straight center handle (not contoured)

d) Dimensions: 14 inches x 6.25 inches x 6 inches L x W x H

e) Must include column stand

0022 6 Each FSC 7810 Long Handle Bushing Jump Rope

FFP

Rogue Brand SR-3L Long Handle Bushing Jump Rope (Part Number AD0076) or Equal with the following Salient Characteristics:

a) Handle Length = 7.5 inches

b) Handgrip: 7/8" diameter, glass-filled Nylon resin

c) Handle Mechanism = Bearing

d) Cable Length - 120 inches

e) Cable Diameter - 3/32 inches

0023 2 Each FSC 7810 Battle Rope

FFP

Rouge Power Rope ( Part Number KRP50) or Equal with the following Salient Characteristics:

a) Length = 50 ft

b) Diameter: 2 inch

0024 2 Each FSC 7810 12 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell ( Part Number KB-12Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 12 kilograms

c) Material: Cast Iron

0025 4 Each FSC 7810 16 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell ( Part Number KB-16 Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 16 kilograms

0026 4 Each FSC 7810 20 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebellor ( Part Number KB-20 Kg) Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 20 kilograms

0027 4 Each FSC 7810 24 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell (KB-24 Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 24 kilograms

0028 2 Each FSC 7810 28 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell ( Part Number KB-28 Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 28 kilograms

0029 2 Each FSC 7810 32 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell ( Part Number KB-32 Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 32 kilograms

0030 2 Each FSC 7810 36 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell ( Part Number KB-36 Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 36 kilograms

0031 2 Each FSC 7810 40 KG Iron Kettlebell

FFP

American Barbell Brand Iron Kettlebell ( Part Number KB-40 Kg) or Equal with the following Salient Characteristics:

a) Must have a metal handle at the top portion of the weight.

b) Weight - 40 kilograms

0032 4 Each FSC 7810 Monster Band 3

FFP

Rogue Fitness Brand Monster Band #3 ( Part Number HB00003) or Equal with the following Salient Characteristics:

a) Must be elastic.

b) 40 or 41 inches long C) 65 lb resistance

0033 8 Each FSC 7810 Monster Band 4

FFP

Rogue Fitness Brand Monster Band #4 ( Part Number HB00004) or Equal with the following Salient Characteristics:

a) Must be elastic.

b) 40 or 41 inches long

c) 100 lb resistance

0034 8 Each FSC 7810 Monster Band 5

FFP

Rogue Fitness Brand Monster Band #5 (Part Number HB00005) or Equal with the following Salient Characteristics:

a) Must be elastic.

b) 40 or 41 inches long

c) 140 lb resistance

0035 5 Each FSC 7810 Stability Ball Trainer

FFP

Bosu Brand Stability Ball Trainer ( Part Number 72-10850-P) or Equal with the following Salient Characteristics:

a) Must include a platform which is round on one side and flat on other side

b) Platform is 12 inches tall with a diameter of 25 inches when fully inflated

0036 10 Each FSC 7810 Black Axis Firm Foam Roller

FFP

OPTP Brand Black Axis Firm Foam Roller ( Part Number 40232134494 AXR366) or Equal with the following Salient Characteristics:

a) Must be made out of high density foam or extra high density foam with a smooth outer surface.

b) 6 inches diameter

c) 36 inches lengths

0037 1 Each FSC 7810 Echo Gym Timer

FFP

Rogue Fitness Echo Gym Timer ( Part Number IP0409) or Equal with the following Salient Characteristics:

a) Single-Sided LED Clock Display with = 4 inch High Red/Green Numbers

b) Remote Control for convenient pausing/re-programming

c) Stopwatch can be set to 1/100 seconds

d) Echo Timer Floor

e) Provides ability to display workout times

0038 50 Each FSC 7810 Lacrosse Ball

FFP

Rogue Fitness Brand Lacrosse Balls ( Part Number LXBBR) or Equal with the following Salient Characteristics:

a) Weight - 5 ounces

b) Diameter - 2.54 inches (official size)

c) Material Type - Rubber

0039 2 Each FSC 7810 Assault Airdyne Pro

FFP

Schwinn Brand Assault Airdyne Pro or Equal ( Part Number SCH0004) with the following Salient Characteristics:

a) Single stage belt drive air resistance system

b) Dimensions: 42 inches x 20 inches x 52 inches (106 centimeters x 50 centimeters x 132 centimeters) L x W x H

c) Moisture-repellent steel construction

d) Product Weight - 113 pounds (51 kilograms)

e) Maximum user weight: 350 pounds

f) LCD display screen with metrics for time, distance, calories, RPM, watts, pulse, and speed

g) Oversized, padded seat for greater comfort

0040 3 Each FSC 7810 Vertical Plate Storage Rack

FFP

Rouge Vertical Plate tree 2.0 (Part Number RF0644) or Equal with the following Salient Characteristics:

a) Must maintain storage capabilities with IWF standard Olympic plates

b) Free standing plate storage with 6 -12 inches Plate Storage Posts

c) Dimensions: 26 inches x 24 inches x 50 inches L x W x H

0041 1 Each FSC 7810 Olympic Bar storage unit

FFP

Rouge 9 Bar Vertical storage unit ( Part Number RA0524) or Equal with the following Salient Characteristics:

a) Must provide vertical storage for Olympic bars

b) Units hold any Olympic sleeve sized bar in 9 bar configuration

0042 2 Each FSC 7810 10LB Wall Ball

FFP

American Barbell Brand Wall Ball ( Part Number MBW-10) or Equal with the following Salient Characteristics:

a) Material: Leather

b) Weight: 10 pounds

0043 3 Each FSC 7810 14LB Wall Ball

FFP

American Barbell Brand Wall Ball ( Part Number MBW-14) or Equal with the following Salient Characteristics:

a) Material: Leather

b) Weight: 14 pounds

0044 2 Each FSC 7810 10LB Echo Slam Ball

FFP

Rogue Brand Echo Slam Ball ( Part Number IP0210-10) or Equal with the following Salient Characteristics:

a) Material: Rubber exterior

b) Weight: 10 pounds

c) Dead bounce impact

d) Color: Black Ball

0045 2 Each FSC 7810 20LB Echo Slam Ball

FFP

Rogue Brand Echo Slam Ball ( Part Number IP0211-20) or Equal with the following Salient Characteristics:

a) Material: Rubber exterior

b) Weight: 20 pounds

c) Dead bounce impact

0046 2 Each FSC 7810 30LB Echo Slam Ball

FFP

Rogue Brand Echo Slam Ball ( Part Number IP0211-30) or Equal with the following Salient Characteristics:

a) Material: Rubber exterior

b) Weight: 30 pounds

c) Dead bounce impact

0047 2 Each FSC 7810 40LB Echo Slam Ball

FFP

Rogue Brand Echo Slam Ball ( Part Number IP0211-40) or Equal with the following Salient Characteristics:

a) Material: Rubber exterior

b) Weight: 40 pounds

c) Dead bounce impact

0048 2 Each FSC 7810 50LB Echo Slam Ball

FFP

Rogue Brand Echo Slam Ball ( Part Number IP0211-50) or Equal with the following Salient Characteristics:

a) Material: Rubber exterior

b) Weight: 50 pounds

c) Dead bounce impa

0049 4 Each FSC 7810 Core Belt

FFP

HumanX by Harbinger Foam Brand Core Belt ( Part Number Harbinger 4" Nylon Belt Small Black - Item #24310, Harbinger 4" Nylon Belt Medium Black - Item #24320, Harbinger 4" Nylon Belt Large Black - Item #24330 and Harbinger 4" Nylon Belt XL Black - Item #24340) or Equal with the following Salient Characteristics:

a) Material: Nylon

b) Dimensions: 4 inches belt with 3 inches support strap

c) Color: Black

d) Includes •Heavy-gauge Steel Roller Buckle for Custom Fit

e) Sizes: 1 small, 1 medium, 1 large, 1 extra large for total of 4 belts

0050 4 Each FSC 7810 Chain Kit

FFP

5/8" Rogue Brand Chain Kit ( Part Number RA0048) or Equal with the following Salient Characteristics:

a) two 15LB Lengths of Chain with Carabiners, two 5LB 4' Lengths of 1/4" Chain with Carabiners (40 LBS total)

b) Provides ability to build strength and to increase speed and acceleration

c) Zinc electroplated to prevent rust

d) Chain Kits include chain with a carabiner in the center for easy loading along with a 4 feet length of chain with carabiner to mount around a barbell

0051 10 Each FSC 7810 Ab Mat

FFP

Rogue Brand abmat ( Part Number AB110 (10 pack)) or Equal with the following Salient Characteristics:

a) Dimensions: =15 inches L x =12 inches W x 2-1/2 inches Thick

b) Low compression set foam and durable vinyl construction

c) Stable positioning on almost any surface

d) Color: Black

0052 2 Each FSC 7810 6 inch Foam Plyobox

FFP

Rogue Brand Foam Plyobox ( Part Number RF0275) or Equal with the following Salient Characteristics:

a) 150mm or 6" height

b) Provides ability to build strength and to increase speed and acceleration

c) Ultra dense foam core with softer foam on all 6 sides

d) Covered with heavy duty vinyl with large hook and loop strips on all 4 sides ensure the boxes will not slip when stacked

e) Color: Black

0053 2 Each FSC 7810 12 inch Foam Plyobox

FFP

Rogue Brand Foam Plyobox ( Part Number RF0275) or Equal with the following Salient Characteristics:

a) 300mm or 12" height

b) Provides ability to build strength and to increase speed and acceleration

c) Ultra dense foam core with softer foam on all 6 sides

d) Covered with heavy duty vinyl with large hook and loop strips on all 4 sides ensure the boxes will not slip when stacked

0054 2 Each FSC 7810 20 inch Foam Plyobox

FFP

Rogue Brand Foam Plyobox ( Part Number RF0275) or Equal with the following Salient Characteristics:

a) 508mm or 20" height

b) Provides ability to build strength and to increase speed and acceleration

c) Ultra dense foam core with softer foam on all 6 sides

d) Covered with heavy duty vinyl with large hook and loop strips on all 4 sides ensure the boxes will not slip when stacked

0055 2 Each FSC 7810 24 inch Foam Plyobox

FFP

Rogue Brand Foam Plyobox Set (Part Number RF0275) or Equal with the following Salient Characteristics:

a) 600mm or 24" height

b) Provides ability to build strength and to increase speed and acceleration

c) Ultra dense foam core with softer foam on all 6 sides

d) Covered with heavy duty vinyl with large hook and loop strips on all 4 sides ensure the boxes will not slip when stacked

0056 2 Each FSC 7810 Magic Carpet Sleds

FFP

Spud Inc. Brand Magic Carpet Sleds or Equal with the following Salient Characteristics:

a) Size 19.5 inches x 23 inches

b) Weight capacity = 500+ pounds; must not weight more than 5 pounds empty.

c) Sled includes Sled Strap with minimum dimension of 8 foot long and 1 inch wide fitted with a large shackle that will fit most any sled and the other end has a 4 inches wide delta ring that will slide over a standard power belt;

d) Sled also includes upper body Sled Strap which can be attached to the Sled Strap listed above with minimum dimension of 8 foot long by 1 inch wide and include nylon sewn handles on each end of strap.

e) Provides means to secure plates on sled

f) Can be pulled across rubber flooring without damaging the floor

g) Color Preference: Black

0057 1 Each FSC 7810 Multi-directional Cable Machine

FFP

TuffStuff MFT 2700 Brand 2-armed, multi-directional cable machine (Part Number MFT-2700) or Equal with the following Salient Characteristics:

a) Must have 2 independent weight stacks and 2 multi-directional movable arms using a cable pulley system

b) Dimensions = 60-63 inches x 113-118 inches x 83-84 inches L x W x H

c) Weighs: 750-925 pounds

d) Weight Stack Configuration Preference = Two (2) 200 lbs. steel weight stacks.

1:4 ratio delivers. 2.5 lbs. resistance increments and 96 inches of extended cable travel

e) Weight Stacks are enclosed to limit access to moving parts. Each weight stack to be independent.

f) Independently Rotating Arms: Pivot arm offers 150º (12-15 positions) of highto-low vertical adjustments and 165º (= 5 positions) of side-to-side horizontal adjustments.

g) Must include single pulley handles (1 pair), pressdown rope w/ rubber ends (1 each), rotating solid pressdown V-bar (1 each), revolving solid curl bar (1 each), revolving solid straight bar (1 each)

0058 2 Each FSC 7810 Ladder Climbing System

FFP

Jacobs Ladder Cardio machine or Equal with the following Salient Characteristics:

a) Must allow for a user-selectable speed on a diagonally-oriented continuous ladder belt

b) Must include digital display of elapsed time, feet climbed, and rate (ft/min)

c) Frame = welded tubular steel

d) Dimensions = 65.5 inches x 31.25 inches x 76 inches H x W x L

e) Power = 115 Volts

f) Watts Angle = 40 degrees

0059 2 Each FSC 7810 Vertical Climber

FFP

VersaClimber SM sport Model Vertical Climber ( Part Number Sorinex Product Code: P00887) or Equal with the following Salient Characteristics:

a) Must include both upper body on a slideable vertical track and lower body in a stepping motion

b) Dimensions = 7 feet 10 inches H; base = 43 inches x 46 inches

c) Resistance = variable

d) Include performance monitor to enable athlete to track pace, time and distance

e) Step height = 1-20 inches

f) Arm travel = 1-20 inches

g) Maximum speed = 350 vertical feet/minute

h) Frame = steel, double-welded

i) Max user weight = 350 pounds

0060 1 Each FSC 7810 Mass Storage add ones

FFP

Rouge Fitness Mass Storage add ones or Equal with the following Salient Characteristics:

a) 3-Tier 70" Mass Storage Add-on

b) Part Number: RF0482-KB-KB-KB

c) (2) 72" Uprights

d) (2) 70" Shelves with the option to upgrade to Kettlebell or Dumbbell trays d (1) Bookshelf Bracket

e) 2-Tier 70" Mass Storage Add-on

f) Part Number: RF0481

g) (2) 45" Uprights h)(2) 70" Shelves with the option to upgrade to Kettlebell or Dumbbell trays

i) (1) Bookshelf Bracket ****** Both Tiered storage must be compatible with Kettlebell and slam ball CLINs*****************************

0061 2 Each FSC 7810 XPO Trainer Sled

FFP

Armored Fitness XPO Trainer Seld or Equal with the following Salient Characteristics:

a) Must be able to allow an individual to improve upon his/her horizontal push and pull strength without damaging gym flooring

b) Provides means to secure resistance plates on sled

c) Assembled Weight: 60lbs to 170lbs unloaded with handles

d) Dimensions: at least 43" L x 31" W x 36" H

e) Sled has a minimum of three wheels and is operational on various flooring surfaces

0062 2 Each FSC 7810 RopeFlex IBEX RX2300 Rope

FFP

RopeFlex IBEX RX2300 or Equal with the following Salient Characteristics:

a) Resistance = capable of 10 to 100lbs

b) Digital display that tracks time, distance and speed

c) Dual Position horizontal and vertical rope climber

0063 1 Job FSC 7810 Installation

FFP

Installation of all equipments

0064 1 Job FSC 7810 Shipping Fee

FFP

All Items shall be shipped directly to the following address:

0025 IN HHC 03 HEADQUARTERS IN

1640 WAIANAE AVE BLDG 649

SCHOFIELD BARRACKS HI 96857-5000

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government

0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government 0035 Destination Government Destination Government 0036 Destination Government Destination Government 0037 Destination Government Destination Government 0038 Destination Government Destination Government 0039 Destination Government Destination Government 0040 Destination Government Destination Government 0041 Destination Government Destination Government 0042 Destination Government Destination Government 0043 Destination Government Destination Government 0044 Destination Government Destination Government 0045 Destination Government Destination Government 0046 Destination Government Destination Government 0047 Destination Government Destination Government 0048 Destination Government Destination Government 0049 Destination Government Destination Government 0050 Destination Government Destination Government 0051 Destination Government Destination Government 0052 Destination Government Destination Government 0053 Destination Government Destination Government 0054 Destination Government Destination Government 0055 Destination Government Destination Government 0056 Destination Government Destination Government 0057 Destination Government Destination Government 0058 Destination Government Destination Government 0059 Destination Government Destination Government 0060 Destination Government Destination Government 0061 Destination Government Destination Government 0062 Destination Government Destination Government 0063 Destination Government Destination Government 0064 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC

0001 12-MAY-2017 1,008 0025 IN HHC 03 HEADQUARTERS IN

CPT STANLEY T. KARETA

1640 WAIANAE RD

SCHOFIELD BARRACKS HI 96858

413-813-8016

W917AD

0002 12-MAY-2017 10 (SAME AS PREVIOUS LOCATION)

0003 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0004 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0005 12-MAY-2017 20 (SAME AS PREVIOUS LOCATION)

0006 12-MAY-2017 7 (SAME AS PREVIOUS LOCATION)

0007 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0008 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0009 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0010 12-MAY-2017 3 (SAME AS PREVIOUS LOCATION)

0011 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0012 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0013 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0014 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0015 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0016 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0017 12-MAY-2017 4 (SAME AS PREVIOUS LOCATION)

0018 12-MAY-2017 3 (SAME AS PREVIOUS LOCATION)

0019 12-MAY-2017 5 (SAME AS PREVIOUS LOCATION)

0020 12-MAY-2017 4 (SAME AS PREVIOUS LOCATION)

0021 12-MAY-2017 3 (SAME AS PREVIOUS LOCATION)

0022 N/A N/A N/A N/A

0023 N/A N/A N/A N/A

0024 N/A N/A N/A N/A

0025 N/A N/A N/A N/A

0026 N/A N/A N/A N/A

0027 N/A N/A N/A N/A

0028 N/A N/A N/A N/A

0029 12-MAY-2017 2 0025 IN HHC 03 HEADQUARTERS IN

CPT STANLEY T. KARETA

1640 WAIANAE RD

SCHOFIELD BARRACKS HI 96858

413-813-8016

0030 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0031 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0032 12-MAY-2017 4 (SAME AS PREVIOUS LOCATION)

0033 12-MAY-2017 8 (SAME AS PREVIOUS LOCATION)

0034 12-MAY-2017 8 (SAME AS PREVIOUS LOCATION)

0035 12-MAY-2017 5 (SAME AS PREVIOUS LOCATION)

0036 12-MAY-2017 10 (SAME AS PREVIOUS LOCATION)

0037 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0038 12-MAY-2017 50 (SAME AS PREVIOUS LOCATION)

0039 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0040 12-MAY-2017 3 (SAME AS PREVIOUS LOCATION)

0041 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0042 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0043 12-MAY-2017 3 (SAME AS PREVIOUS LOCATION)

0044 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0045 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0046 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0047 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0048 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0049 12-MAY-2017 4 (SAME AS PREVIOUS LOCATION)

0050 12-MAY-2017 4 (SAME AS PREVIOUS LOCATION)

0051 12-MAY-2017 10 (SAME AS PREVIOUS LOCATION)

0052 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0053 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0054 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0055 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0056 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0057 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0058 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0059 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0060 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0061 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0062 12-MAY-2017 2 (SAME AS PREVIOUS LOCATION)

0063 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

0064 12-MAY-2017 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreeements or Statements

JAN 2017

52.204-7 System for Award Management OCT 2016 52.212-1 Instructions to Offerors--Commercial Items JAN 2017 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.204-7002 Payment For Subline Items Not Separately Priced DEC 1991 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014

252.204-7011 Alternative Line Item Structure SEP 2011 252.225-7001 Buy American And Balance Of Payments Program-- Basic

(Dec 2016)

DEC 2016

252.232-7010 Levies on Contract Payments DEC 2006 252.244-7000 Subcontracts for Commercial Items JUN 2013

CLAUSES INCORPORATED BY FULL TEXT

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

・ Lowest Price that meets the specifications of the solicitation.

・ To be considered for award offeror must meet requirement of FAR clause 52.211-6 Brand name or Equal.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JAN 2017)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision --

“Administrative merits determination” means certain notices or findings of labor law violations issued by an enforcement agency following an investigation. An administrative merits determination may be final or be subject to appeal or further review. To determine whether a particular notice or finding is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“Arbitral award or decision” means an arbitrator or arbitral panel determination that a labor law violation occurred, or that enjoined or restrained a violation of labor law. It includes an award or decision that is not final or is subject to being confirmed, modified, or vacated by a court, and includes an award or decision resulting from private or confidential proceedings. To determine whether a particular award or decision is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“Civil judgment” means—

(1) In paragraph (h) of this provision: A judgment or finding of a civil offense by any court of competent jurisdiction.

(2) In paragraph (s) of this provision: Any judgment or order entered by any Federal or State court in which the court determined that a labor law violation occurred, or enjoined or restrained a violation of labor law. It includes a judgment or order that is not final or is subject to appeal. To determine whether a particular judgment or order is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance.

“DOL Guidance” means the Department of Labor (DOL) Guidance entitled: ``Guidance for Executive Order 13673, `Fair Pay and Safe Workplaces' ''. The DOL Guidance, dated August 25, 2016, can be obtained from www.dol.gov/fairpayandsafeworkplaces.

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Enforcement agency” means any agency granted authority to enforce the Federal labor laws. It includes the enforcement components of DOL (Wage and Hour Division, Office of Federal Contract Compliance Programs, and Occupational Safety and Health Administration), the Equal Employment Opportunity Commission, the Occupational Safety and Health Review Commission, and the National Labor Relations Board. It also means a State agency designated to administer an OSHA-approved State Plan, but only to the extent that the State agency is acting in its capacity as administrator of such plan. It does not include other Federal agencies which, in their capacity as contracting agencies, conduct investigations of potential labor law violations. The enforcement agencies associated with each labor law under E.O. 13673 are--

(1) Department of Labor Wage and Hour Division (WHD) for--

(i) The Fair Labor Standards Act;

(ii) The Migrant and Seasonal Agricultural Worker Protection Act;

(iii) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act;

(iv) 41 U.S.C. chapter 67, formerly known as the Service Contract Act;

(v) The Family and Medical Leave Act; and

(vi) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors);

(2) Department of Labor Occupational Safety and Health Administration (OSHA) for--

(i) The Occupational Safety and Health Act of 1970; and

(ii) OSHA-approved State Plans;

(3) Department of Labor Office of Federal Contract Compliance Programs (OFCCP) for--

(i) Section 503 of the Rehabilitation Act of 1973;

(ii) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974; and

(iii) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity);

(4) National Labor Relations Board (NLRB) for the National Labor Relations Act; and

(5) Equal Employment Opportunity Commission (EEOC) for--

(i) Title VII of the Civil Rights Act of 1964;

(ii) The Americans with Disabilities Act of 1990;

(iii) The Age Discrimination in Employment Act of 1967; and

(iv) Section 6(d) of the Fair Labor Standards Act (Equal Pay Act).

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Labor compliance agreement” means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters.

“Labor laws” means the following labor laws and E.O.s:

(1) The Fair Labor Standards Act.

(2) The Occupational Safety and Health Act (OSHA) of 1970.

(3) The Migrant and Seasonal Agricultural Worker Protection Act.

(4) The National Labor Relations Act.

(5) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act.

(6) 41 U.S.C. chapter 67, formerly known as the Service Contract Act.

(7) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity).

(8) Section 503 of the Rehabilitation Act of 1973.

(9) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974.

(10) The Family and Medical Leave Act.

(11) Title VII of the Civil Rights Act of 1964.

(12) The Americans with Disabilities Act of 1990.

(13) The Age Discrimination in Employment Act of 1967.

(14) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors).

(15) Equivalent State laws as defined in the DOL Guidance. (The only equivalent State laws implemented in the FAR are OSHA-approved State Plans, which can be found at www.osha.gov/dcsp/osp/approved_state_plans.html).

“Labor law decision” means an administrative merits determination, arbitral award or decision, or civil judgment, which resulted from a violation of one or more of the laws listed in the definition of

``labor laws''.

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of…