16B0006_Solicitation(2).pdf

SEE ADDENDUM

(No Collect Calls)

W912BU-16-B-0006 21-Mar-2016

b. TELEPHONE NUMBER

215-656-6773

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 21 Apr 2016

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912BU9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JUSTIN CHUNG

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

W25PHS51810978

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

WOMEN-OWNED SMALL

BUSINESS (WOSB)

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

US ARMY ENGINEER DISTRICT, PHILADELPHIA

POC: JUSTIN CHUNG

WANAMAKER BUILDING

100 PENN SQUARE EAST

PHILADELPHIA PA 19107-3390

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 9622AA 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

U.S.ARMY CORPS OF ENGINEERS- CAVEN PT TE

RICHARD KISS

US ARMY CORPS OF ENGINEER

CAVEN POINT TERMINAL

3 CHAPEL AVE, PORT LIBERTE

JERSEY CITY NJ 07305

TEL: 212-264-0180 FAX:

215-656-6780FAX:

TEL: 215-656-6773 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

$7,500,000.00

NAICS:

811310

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF47

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912BU-16-B-0006

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Dobrin Engine Overhaul

FFP

The contractor shall perform the requirements of the Performance Work Statement.

The contractor shall perform the work on the vessel. The period of performance is 60 days after notice to proceed (NTP).

FOB: Destination

MILSTRIP: W25PHS51810978

PURCHASE REQUEST NUMBER: W25PHS51810978

NET AMT

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

C001 GENERAL REQUIREMENTS

The contractor shall provide all labor, materials and equipment required to perform the major overhaul on the two

(2) main engines of the USACE New York District survey vessel DOBRIN.

The contractor shall be an authorized and\or certified MTU\Detroit Diesel dealer or repair facility. All overhaul services shall be performed by a certified Detroit Diesel technician. See Section L – Instructions, Conditions & Notices to Bidders for submitting proof of authorization\certification at time of bid submission.

All engine parts shall be new Detroit Diesel genuine parts or manufacturer approved replacements.

All work shall be performed in accordance with OSHA requirements (29 CFR 1926) as well as all requirements under the U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1) which is available for download at:

http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx.

C025 VESSEL & WORK LOCATION

The engine overhauls shall be performed onboard the DOBRIN at the Corps facility located in Jersey City, New Jersey. The address of the facility is

U.S. Army Corps of Engineers Caven Point Terminal 3 Chapel Avenue Port Liberte Jersey City, NJ 07305

All onsite work shall be performed during regular business hours on Monday through Friday from 0700 hrs to 1530 hrs, Eastern Standard Time.

C050 BIDDER’S INSPECTION

All potential bidders may request an inspection of the vessel prior to submitting a bid. All requests shall be coordinated with US Army Corps of Engineers, New York District Caven Point Office - William Lyness - (201) 309-2360. All requests for inspection shall be no later than 10 days after the original posted date of the solicitation.

See Section J for list of reference drawings.

C075 CONTRACT DURATION

The contract duration is sixty (60) calendar days after issuance of Notice to Proceed for the contract.

C600 ENGINE BACKGROUND INFORMATION

The DOBRIN main engine information is as follows:

Port Main Engine:

Detroit Diesel Model 12V92 DDEC 8122-7K22, Marine Engine Serial Number 12VF-12067

Starboard Main Engine:

Detroit Diesel Model 12V92 DDEC 8122-7K22, Marine Engine Serial Number 12VF-12062

C605 ENGINE OVERHAUL DETAILS

For each main engine, the port main engine and the starboard main engine, the contractor shall perform all of the tasks listed below:

- Remove existing and replace with new, 4 cylinder heads and head gaskets

- Remove existing and replace with new, 12 cylinder kits

- Remove existing and replace with new, 12 fuel injectors with new jumper lines

- Remove existing and replace with new, 12 connecting rods

- Remove existing and replace with new, Set of rod bearings

- Remove existing and replace with new, 7 main bearings

- Remove existing and replace with new, 4 thermostats

- Remove existing and replace with new, 2 blowers

- Remove existing and replace with new, 1 water pump

- Remove existing and replace with new, 1 fuel pump

- Remove existing and replace with new, 1 oil pump

- Remove existing and replace with new, a set of coolant hoses

- Remove existing and replace with new, oil, fuel and air filters

- Fill with new engine oil and fresh engine coolant

- Remove existing and replace with new, rear main seals

The contractor shall be responsible with removing and installing all equipment and parts that must be removed to complete the engine overhauls. The contractor shall be responsible with replacing or repairing any damaged equipment or parts that are removed and installed during the overhaul.

The contractor shall scrap all existing materials removed from the engines. The contractor is responsible for disposing of all fluids removed from the engine.

The contractor shall replace all gaskets and seals on the exhaust system with new gaskets and seals.

The contractor shall fabricate new flexible connections for each main engine exhaust system and install the flexible connections upon completion of each engine overhaul.

The contractor shall provide all rigging equipment to remove and install equipment and parts into the Engine Hold from the Main Deck. The contractor shall fabricate a lifting A-Frame to mount above the engines in the Engine Hold for the purpose of removing and installing engine parts. Upon completion of the work the A-Frame shall be provided to the Government.

The Government will provide a forklift and a crane with operator to assist with onsite work as needed. Note – The Government will not provide crane support for the purpose of lifting personnel.

C800 TEST & TRIALS

Upon completion of equipment re-installation, the contractor shall perform testing and sea trials on both main engines in accordance with the engine manufacturer’s requirements.

The operation of the vessel during testing and sea trials will be performed by the Government.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government

CLAUSES INCORPORATED BY REFERENCE

52.246-4 Inspection Of Services--Fixed Price AUG 1996

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 60 dys. ADC 1 U.S.ARMY CORPS OF ENGINEERS-

CAVEN PT TE

RICHARD KISS

US ARMY CORPS OF ENGINEER

CAVEN POINT TERMINAL

3 CHAPEL AVE, PORT LIBERTE

JERSEY CITY NJ 07305

212-264-0180 FOB: Destination

9622AA

52.247-34 F.O.B. Destination NOV 1991

Section G - Contract Administration Data

BILLING INSTRUCTIONS

Correspondence, invoices and supporting documentation may be submitted electronically or as hard copy to the following:

U.S. Army Corps of Engineers Marine Design Center Wanamaker Building, Room 630 South 100 Penn Square East Philadelphia, Pennsylvania 19107-3391

Attn: Edward A. Vollberg, COR edward.a.vollberg@usace.army.mil Telephone: (215) 656 - 6850 cc: carol.a.o’toole@usace.army.mil

Section I - Contract Clauses

52.203-3 Gratuities APR 1984 52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(Sep 2006) -- Alternate I

OCT 1995

52.203-16 Preventing Personal Conflicts of Interest DEC 2011 52.203-17 Contractor Employee Whistleblower Rights and Requirement

To Inform Employees of Whistleblower Rights

APR 2014

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

MAY 2011

52.204-7 System for Award Management JUL 2013 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

OCT 2015

52.204-13 System for Award Management Maintenance JUL 2013 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

OCT 2015

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.212-4 Contract Terms and Conditions--Commercial Items MAY 2015 52.214-29 Order Of Precedence--Sealed Bidding JAN 1986 52.219-4 Notice of Price Evaluation Preference for HUBZone Small

Business Concerns

OCT 2014

52.219-8 Utilization of Small Business Concerns OCT 2014 52.222-3 Convict Labor JUN 2003 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity APR 2015 52.222-35 Equal Opportunity for Veterans OCT 2015 52.222-36 Equal Opportunity for Workers with Disabilities JUL 2014 52.222-37 Employment Reports on Veterans OCT 2015 52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-50 Combating Trafficking in Persons MAR 2015 52.222-54 Employment Eligibility Verification OCT 2015 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-3 Continuity Of Services JAN 1991 52.242-13 Bankruptcy JUL 1995 52.253-1 Computer Generated Forms JAN 1991 252.201-7000 Contracting Officer's Representative DEC 1991

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7012 (Dev) Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2015

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.225-7001 Buy American And Balance Of Payments Program-- Basic (Nov 2014)

NOV 2014

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2012 252.225-7012 Preference For Certain Domestic Commodities FEB 2013 252.225-7048 Export-Controlled Items JUN 2013 252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS—COMMERCIAL ITEMS (DEVIATION 2013-O0019) (FEB 2016)

(a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(b)

(1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(v) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xi)

___ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Aug 2013).

(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (E.O. 13658).

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013)

(a) Definitions. As used in this clause--

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code - assigned to contract number .

(Contractor to sign and date and insert authorized signer's name and title).

(End of clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

When submitting a request for payment, the Contractor shall--

(a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and

(b) Separately identify a payment amount for each contract line item included in the payment request.

Section J - List of Documents, Exhibits and Other Attachments

CONTRACT DRAWINGS

The following contract drawings and documents are hereby incorporated into this contract. They will be provided as seperate uploads into the Federal Business Opportunities website.

Drawing Number Drawing #409-D205-01 – Outboard Profile 1 sheet Drawing #409-D210-01 – Inboard Profile 1 sheet Drawing #409-D215-01 – General Arrangement 1 sheet Drawing #409-D245-01 – Machinery Arrangement 1 sheet Drawing #409-D605-01 – Propulsion Drive System 3 sheets Drawing #409-D630-01 – Fuel Oil System 1 sheet Drawing #409-D640-01 – Engine Cooling System 1 sheet Drawing #409-D650-01 – Engine Exhaust Piping 2 sheets

WD 05-2353

WD 05-2353 (Rev.-17) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2353 Daniel W. Simms Division of | Revision No.: 17 Director Wage Determinations| Date Of Revision: 12/29/2015 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New Jersey

Area: New Jersey Counties of Essex, Hudson, Morris, Sussex, Union **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.11 01012 - Accounting Clerk II 19.61 01013 - Accounting Clerk III 21.89 01020 - Administrative Assistant 30.93 01040 - Court Reporter 21.64 01051 - Data Entry Operator I 14.71 01052 - Data Entry Operator II 16.05 01060 - Dispatcher, Motor Vehicle 25.79 01070 - Document Preparation Clerk 15.56 01090 - Duplicating Machine Operator 15.56 01111 - General Clerk I 14.82 01112 - General Clerk II 17.49 01113 - General Clerk III 19.01 01120 - Housing Referral Assistant 26.92 01141 - Messenger Courier 12.87 01191 - Order Clerk I 16.49 01192 - Order Clerk II 21.31

01261 - Personnel Assistant (Employment) I 18.96 01262 - Personnel Assistant (Employment) II 21.22 01263 - Personnel Assistant (Employment) III 23.66 01270 - Production Control Clerk 23.51 01280 - Receptionist 15.67 01290 - Rental Clerk 18.04 01300 - Scheduler, Maintenance 21.57 01311 - Secretary I 21.57 01312 - Secretary II 24.82 01313 - Secretary III 26.92 01320 - Service Order Dispatcher 20.50 01410 - Supply Technician 30.93 01420 - Survey Worker 21.64 01531 - Travel Clerk I 15.98 01532 - Travel Clerk II 17.31 01533 - Travel Clerk III 18.79 01611 - Word Processor I 17.62 01612 - Word Processor II 19.79 01613 - Word Processor III 22.13 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 28.43 05010 - Automotive Electrician 28.50 05040 - Automotive Glass Installer 27.31 05070 - Automotive Worker 27.31 05110 - Mobile Equipment Servicer 24.42 05130 - Motor Equipment Metal Mechanic 29.68 05160 - Motor Equipment Metal Worker 27.31 05190 - Motor Vehicle Mechanic 29.68 05220 - Motor Vehicle Mechanic Helper 23.15 05250 - Motor Vehicle Upholstery Worker 26.12 05280 - Motor Vehicle Wrecker 27.31 05310 - Painter, Automotive 28.50 05340 - Radiator Repair Specialist 27.31 05370 - Tire Repairer 17.92 05400 - Transmission Repair Specialist 29.68 07000 - Food Preparation And Service Occupations 07010 - Baker 17.64 07041 - Cook I 15.07 07042 - Cook II 16.80 07070 - Dishwasher 9.45 07130 - Food Service Worker 12.58 07210 - Meat Cutter 19.20 07260 - Waiter/Waitress 12.67 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 22.00 09040 - Furniture Handler 16.73 09080 - Furniture Refinisher 22.00 09090 - Furniture Refinisher Helper 18.56 09110 - Furniture Repairer, Minor 20.16 09130 - Upholsterer 22.00 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 12.85 11060 - Elevator Operator 12.85 11090 - Gardener 19.39 11122 - Housekeeping Aide 15.70 11150 - Janitor 15.70 11210 - Laborer, Grounds Maintenance 15.89 11240 - Maid or Houseman 13.34 11260 - Pruner 14.75 11270 - Tractor Operator 19.39 11330 - Trail Maintenance Worker 15.89 11360 - Window Cleaner 16.86 12000 - Health Occupations 12010 - Ambulance Driver 22.53 12011 - Breath Alcohol Technician 22.61 12012 - Certified Occupational Therapist Assistant 24.12 12015 - Certified Physical Therapist Assistant 22.28 12020 - Dental Assistant 16.75 12025 - Dental Hygienist 35.31 12030 - EKG Technician 28.65 12035 - Electroneurodiagnostic Technologist 28.65 12040 - Emergency Medical Technician 22.53 12071 - Licensed Practical Nurse I 20.52 12072 - Licensed Practical Nurse II 24.34

12073 - Licensed Practical Nurse III 24.48 12100 - Medical Assistant 16.66 12130 - Medical Laboratory Technician 20.63 12160 - Medical Record Clerk 18.00 12190 - Medical Record Technician 20.55 12195 - Medical Transcriptionist 19.09 12210 - Nuclear Medicine Technologist 36.93 12221 - Nursing Assistant I 12.37 12222 - Nursing Assistant II 13.91 12223 - Nursing Assistant III 15.82 12224 - Nursing Assistant IV 16.79 12235 - Optical Dispenser 24.64 12236 - Optical Technician 16.64 12250 - Pharmacy Technician 14.58 12280 - Phlebotomist 16.79 12305 - Radiologic Technologist 28.08 12311 - Registered Nurse I 32.76 12312 - Registered Nurse II 38.41 12313 - Registered Nurse II, Specialist 38.41 12314 - Registered Nurse III 49.39 12315 - Registered Nurse III, Anesthetist 49.39 12316 - Registered Nurse IV 59.22 12317 - Scheduler (Drug and Alcohol Testing) 26.17 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 27.03 13012 - Exhibits Specialist II 33.49 13013 - Exhibits Specialist III 40.95 13041 - Illustrator I 26.51 13042 - Illustrator II 33.23 13043 - Illustrator III 40.60 13047 - Librarian 36.42 13050 - Library Aide/Clerk 15.79 13054 - Library Information Technology Systems 32.65 Administrator 13058 - Library Technician 25.62 13061 - Media Specialist I 23.57 13062 - Media Specialist II 26.35 13063 - Media Specialist III 29.39 13071 - Photographer I 21.29 13072 - Photographer II 24.10 13073 - Photographer III 32.88 13074 - Photographer IV 41.88 13075 - Photographer V 50.02 13110 - Video Teleconference Technician 24.33 14000 - Information Technology Occupations 14041 - Computer Operator I 19.00 14042 - Computer Operator II 21.26 14043 - Computer Operator III 23.71 14044 - Computer Operator IV 26.35 14045 - Computer Operator V 29.17 14071 - Computer Programmer I (see 1) 27.56 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 19.00 14160 - Personal Computer Support Technician 26.35 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 39.54 15020 - Aircrew Training Devices Instructor (Rated) 43.75 15030 - Air Crew Training Devices Instructor (Pilot) 52.46 15050 - Computer Based Training Specialist / Instructor 39.54 15060 - Educational Technologist 35.73 15070 - Flight Instructor (Pilot) 52.46 15080 - Graphic Artist 31.85 15090 - Technical Instructor 30.07 15095 - Technical Instructor/Course Developer 36.67 15110 - Test Proctor 23.24 15120 - Tutor 23.24 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 11.62 16030 - Counter Attendant 11.62

16040 - Dry Cleaner 14.30 16070 - Finisher, Flatwork, Machine 11.62 16090 - Presser, Hand 11.62 16110 - Presser, Machine, Drycleaning 11.62 16130 - Presser, Machine, Shirts 11.62 16160 - Presser, Machine, Wearing Apparel, Laundry 11.62 16190 - Sewing Machine Operator 15.19 16220 - Tailor 16.04 16250 - Washer, Machine 12.60 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 20.89 19040 - Tool And Die Maker 30.07 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.28 21030 - Material Coordinator 23.51 21040 - Material Expediter 23.51 21050 - Material Handling Laborer 13.57 21071 - Order Filler 14.92 21080 - Production Line Worker (Food Processing) 17.28 21110 - Shipping Packer 15.28 21130 - Shipping/Receiving Clerk 15.28 21140 - Store Worker I 15.06 21150 - Stock Clerk 18.88 21210 - Tools And Parts Attendant 18.10 21410 - Warehouse Specialist 18.10 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.79 23021 - Aircraft Mechanic I 27.11 23022 - Aircraft Mechanic II 29.58 23023 - Aircraft Mechanic III 30.66 23040 - Aircraft Mechanic Helper 22.98 23050 - Aircraft, Painter 26.03 23060 - Aircraft Servicer 24.93 23080 - Aircraft Worker 26.07 23110 - Appliance Mechanic 23.37 23120 - Bicycle Repairer 17.92 23125 - Cable Splicer 36.53 23130 - Carpenter, Maintenance 29.89 23140 - Carpet Layer 27.98 23160 - Electrician, Maintenance 37.18 23181 - Electronics Technician Maintenance I 24.19 23182 - Electronics Technician Maintenance II 25.36 23183 - Electronics Technician Maintenance III 26.40 23260 - Fabric Worker 28.00 23290 - Fire Alarm System Mechanic 23.94 23310 - Fire Extinguisher Repairer 22.51 23311 - Fuel Distribution System Mechanic 29.00 23312 - Fuel Distribution System Operator 26.13 23370 - General Maintenance Worker 23.69 23380 - Ground Support Equipment Mechanic 27.11 23381 - Ground Support Equipment Servicer 24.93 23382 - Ground Support Equipment Worker 26.07 23391 - Gunsmith I 22.51 23392 - Gunsmith II 25.12 23393 - Gunsmith III 27.25 23410 - Heating, Ventilation And Air-Conditioning 26.97 Mechanic 23411 - Heating, Ventilation And Air Contditioning 28.93 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 26.10 23440 - Heavy Equipment Operator 34.30 23460 - Instrument Mechanic 30.35 23465 - Laboratory/Shelter Mechanic 26.21 23470 - Laborer 13.74 23510 - Locksmith 20.95 23530 - Machinery Maintenance Mechanic 23.76 23550 - Machinist, Maintenance 19.79 23580 - Maintenance Trades Helper 15.09 23591 - Metrology Technician I 30.35 23592 - Metrology Technician II 31.54 23593 - Metrology Technician III 32.68 23640 - Millwright 30.87 23710 - Office Appliance Repairer 22.91 23760 - Painter, Maintenance 26.50

23790 - Pipefitter, Maintenance 31.12 23810 - Plumber, Maintenance 31.90 23820 - Pneudraulic Systems Mechanic 27.25 23850 - Rigger 25.59 23870 - Scale Mechanic 25.12 23890 - Sheet-Metal Worker, Maintenance 29.46 23910 - Small Engine Mechanic 20.07 23931 - Telecommunications Mechanic I 30.91 23932 - Telecommunications Mechanic II 32.20 23950 - Telephone Lineman 32.90 23960 - Welder, Combination, Maintenance 22.17 23965 - Well Driller 25.11 23970 - Woodcraft Worker 27.25 23980 - Woodworker 20.41 24000 - Personal Needs Occupations 24570 - Child Care Attendant 13.05 24580 - Child Care Center Clerk 16.41 24610 - Chore Aide 10.32 24620 - Family Readiness And Support Services 14.59 Coordinator 24630 - Homemaker 20.13 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 29.03 25040 - Sewage Plant Operator 25.19 25070 - Stationary Engineer 29.03 25190 - Ventilation Equipment Tender 23.71 25210 - Water Treatment Plant Operator 25.36 27000 - Protective Service Occupations 27004 - Alarm Monitor 19.12 27007 - Baggage Inspector 17.98 27008 - Corrections Officer 30.97 27010 - Court Security Officer 30.66 27030 - Detection Dog Handler 20.36 27040 - Detention Officer 30.97 27070 - Firefighter 31.42 27101 - Guard I 17.98 27102 - Guard II 20.36 27131 - Police Officer I 32.37 27132 - Police Officer II 35.94 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.27 28042 - Carnival Equipment Repairer 13.85 28043 - Carnival Equpment Worker 10.96 28210 - Gate Attendant/Gate Tender 16.49 28310 - Lifeguard 13.40 28350 - Park Attendant (Aide) 18.46 28510 - Recreation Aide/Health Facility Attendant 18.95 28515 - Recreation Specialist 22.88 28630 - Sports Official 14.69 28690 - Swimming Pool Operator 20.05 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 29.08 29020 - Hatch Tender 29.08 29030 - Line Handler 29.08 29041 - Stevedore I 27.56 29042 - Stevedore II 32.96 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 40.33 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 27.82 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 30.63 30021 - Archeological Technician I 19.69 30022 - Archeological Technician II 22.02 30023 - Archeological Technician III 27.27 30030 - Cartographic Technician 27.27 30040 - Civil Engineering Technician 25.21 30061 - Drafter/CAD Operator I 19.69 30062 - Drafter/CAD Operator II 22.02 30063 - Drafter/CAD Operator III 24.55 30064 - Drafter/CAD Operator IV 30.20 30081 - Engineering Technician I 19.98 30082 - Engineering Technician II 22.47 30083 - Engineering Technician III 25.28 30084 - Engineering Technician IV 31.22 30085 - Engineering Technician V 38.08

30086 - Engineering Technician VI 46.20 30090 - Environmental Technician 21.65 30210 - Laboratory Technician 21.37 30240 - Mathematical Technician 27.04 30361 - Paralegal/Legal Assistant I 23.36 30362 - Paralegal/Legal Assistant II 28.94 30363 - Paralegal/Legal Assistant III 35.39 30364 - Paralegal/Legal Assistant IV 42.84 30390 - Photo-Optics Technician 27.27 30461 - Technical Writer I 26.41 30462 - Technical Writer II 32.29 30463 - Technical Writer III 39.16 30491 - Unexploded Ordnance (UXO) Technician I 25.63 30492 - Unexploded Ordnance (UXO) Technician II 31.02 30493 - Unexploded Ordnance (UXO) Technician III 37.18 30494 - Unexploded (UXO) Safety Escort 25.63 30495 - Unexploded (UXO) Sweep Personnel 25.63 30620 - Weather Observer, Combined Upper Air Or (see 2) 24.55 Surface Programs 30621 - Weather Observer, Senior (see 2) 27.27 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 16.40 31030 - Bus Driver 21.88 31043 - Driver Courier 18.39 31260 - Parking and Lot Attendant 10.05 31290 - Shuttle Bus Driver 17.81 31310 - Taxi Driver 13.23 31361 - Truckdriver, Light 19.53 31362 - Truckdriver, Medium 20.63 31363 - Truckdriver, Heavy 24.52 31364 - Truckdriver, Tractor-Trailer 24.52 99000 - Miscellaneous Occupations 99030 - Cashier 10.53 99050 - Desk Clerk 13.34 99095 - Embalmer 30.19 99251 - Laboratory Animal Caretaker I 12.33 99252 - Laboratory Animal Caretaker II 13.11 99310 - Mortician 34.82 99410 - Pest Controller 17.08 99510 - Photofinishing Worker 16.23 99710 - Recycling Laborer 19.78 99711 - Recycling Specialist 22.59 99730 - Refuse Collector 18.36 99810 - Sales Clerk 14.70 99820 - School Crossing Guard 14.08 99830 - Survey Party Chief 22.53 99831 - Surveying Aide 16.33 99832 - Surveying Technician 20.42 99840 - Vending Machine Attendant 19.31 99841 - Vending Machine Repairer 22.06 99842 - Vending Machine Repairer Helper 19.31

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, 4 weeks after 15 years, and 5 weeks after 25 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job…