Performance_Work_Statement.pdf

PERFORMANCE WORK STATEMENT (PWS)

For

Purchase and Installation of Closed Circuit Television (CCTV) and Access Control Equipment at the

Springfield MEPS located at 551 Airlift Drive, Westover ARB, Chicopee, MA 01022

PART 1

GENERAL INFORMATION

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and non-personal services necessary to purchase and install Closed Circuit Television (CCTV) and Access Control Equipment at the Springfield MEPS located at 551 Airlift Drive, Westover ARB, Chicopee, MA 01022 as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

1.2 Background: The Springfield MEPS requires CCTV and Access Control system upgrades.

1.3 Scope: The contractor shall accomplish and provide all labor, material, and equipment necessary to perform the purchase, install CCTV and Access Control Equipment at the Springfield MEPS located at 551 Airlift Drive, Westover ARB, Chicopee, MA as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract. The contractor shall:

A Install the following at reference point A:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (MEPS personnel must be able to use their existing common access cards on card readers) (tie into access control system)

Replace Intrusion Detection System keypad with an Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

One Aiphone (video/audio) door station (replacement for existing door station at main entry door)

B Install the following at reference point B:

Install one exterior low light, high resolution, color cameras mini-domed, fixed position (IR

LEDs ≈100', Color, 700TVL, 12VDC/24VAC, 4‐9mm, IP65, White Housing) covering main entry doors and area under overhang (tie into CCTV system) (Refer to attachment 2 for additional location reference)

C Install the following at reference point C:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (MEPS personnel must be able to use their existing common access cards on card readers)

One electronic door strike with Aiphone master station release located at the main control desk

D Install the following at reference point D:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

E Install the following at reference point E:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

F Install the following at reference point F:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

G Install the following at reference point G:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

H Install the following at reference point H:

One A iPhone (video/audio) master station with 7” screen (replacement for existing door intercom system) with release for the following doors: main doors (Item A), secondary doors (Item C)

One 32 channel digital video recorder (DVR) w/CD-RW, 5TB – 10TB hard drive (replacement for existing 16 channel DVR) (tie into existing CCTV system)

One 40” color CCTV flat panel monitor (replacement for existing CCTV monitor) (tie into existing CCTV system) on top of main control desk

I Install the following at reference point I:

One 32” color CCTV flat panel monitor (replacement for existing CCTV monitor) (tie into existing CCTV system) on top of CAT/ASVAB test administrator’s desk J Install the following at reference point J:

Install one interior, low light, high resolution, color camera, mini-domed, ceiling mounted (IR LEDs ≈100', Color, 700TVL, 12VDC/24VAC, 4‐9mm, IP65, White Housing) covering medical section applicant’s waiting area (tie into existing CCTV system) (Refer to attachment 2 for additional location reference)

K Install the following at reference point K:

Install one interior, low light, high resolution, color camera, mini-domed, ceiling mounted (IR

LEDs ≈100', Color, 700TVL, 12VDC/24VAC, 4‐9mm, IP65, White Housing) covering down hallway (tie into existing CCTV system) (Refer to attachment 2 for additional location reference)

L Install the following at reference point L:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

Appropriate software/equipment for access control management (Recommended Access Control System – Tyco Security Products CCURE 9000 Site Server with Event Management Software) Appropriate CPU/laptop for access control management (Recommended Access Control System – Tyco Security Products CCURE 9000 Site Server with Event Management Software) One uninterrupted power supply/battery backup with 24 hours of operational power during power outages Twenty-five blank programmable FIPS 201 compliant cards (to be issued to non-CAC holders e.g.

cleaning crew) Provide training on the administration and operation of the CCURE access control system

1.3.1 All exposed wiring must be incased in conduit, however, the contractor shall minimize use of conduit by installing wire in walls and above ceiling whenever possible.

1.4 General Information

1.4.1 Recognized Holidays: The contractor is not required to perform services on holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

1.4.2 Hours of Operation: The contractor is responsible for conducting business, between the hours of 8:00 AM through 4:00 PM CST Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor shall not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.4.3 Place of Performance: The work to be performed under this contract shall be performed at Springfield MEPS located at 551 Airlift Drive, Westover ARB, and Chicopee, MA 01022.

1.4.4 Type of Contract: The government will award a firm fixed price contract.

1.4.5 Security Requirements: Upon entering the government facility, all personnel employed by or representing the contractor in the performance of this contract shall abide by all USMEPCOM security procedures that are in effect. No contractor employee shall be permitted on the installation/facility if his/her presence is deemed by the security guard or MEPS Commander to be detrimental to the security of USMEPCOM. Contractor workforce shall comply with all personal identification verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this task order awarded hereunder, should the force protection condition (FPCON) at any individual facility or installation change, the government may require changes in the contractor security matters or processes. The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office.

1.4.6. The contractor shall comply with all applicable regulations and laws.

1.4.7 Within 30 calendar days after task order start date, or within 10 days of new employees or subcontractor employees commencing performance under this task order, all contractor employees, to include subcontractor employees, requiring access to government installations, facilities and/or controlled access areas shall complete the training listed in paragraphs 1.4.8, 1.4.9, and 1.4.10. Upon completion of training, the contractor shall submit to the COR a certificate (where a certificate is provided) or the name of each affected employee who has completed training. All training will be made available at the following website: http://www.mepcom.army.mil/contractors.html. This training website is available to any computer capable of accessing the internet.

1.4.8 Antiterrorism (AT) Level I awareness training. NOTE: AT Level I training must be completed annually by all affected employees.

1.4.9 iWATCH Training. This training shall be completed within 30 calendar days of contract award and within 60 calendar days of new employees commencing performance with the results reported to the COR not later than (NLT) 10 calendar days. This training is available on the USMEPCOM Contractor Training web page: http://www.mepcom.army.mil/contractors.html. This training website is available to any computer capable of accessing the internet.

1.4.10 OPSEC Training. NOTE: OPSEC Training must be completed annually by all affected employees.

Contractors shall follow the USMEPCOM OPSEC policies and regulations.

1.4.11 The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured.

1.4.12 Key Control. The Contractor shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons. NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the Quality Control Plan. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the Contracting Officer.

1.4.13 In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.4.14 The Contractor shall prohibit the use of Government issued keys/key cards by any persons other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

1.4.15 Post Award Conference/Periodic Progress Meetings: The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The contracting officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the contracting officer will apprise the contractor of how the government views the contractor's performance and the contractor shall apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government.

1.4.16 Contracting Officer Representative (COR): The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies;

coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.4.17 Key Personnel: The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between 8:00 AM to 4:00 PM, Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons.

1.4.18 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed. Contractor personnel shall be required to obtain and wear badges in the performance of this service.

1.4.19 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.4.20 Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan shall be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE Surveillance Plan (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11. SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.12. WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12. WORK WEEK. Monday through Friday, unless specified otherwise.

2.2. ACRONYMS:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation CCE Contracting Center of Excellence CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1 Facilities: The Government will provide access to the Springfield MEPS spaces.

3.2 Equipment: The Government will provide telephone lines, as required/requested.

3.3 Materials: The Government will provide blueprints and/or diagrams.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1 General: The Contractor shall furnish all supplies, equipment, facilities and services required to perform work under this contract that are not listed under Section 3 of this PWS.

PART 5

SPECIFIC TASKS

5. Specific Tasks:

5.1. Basic Services. The contractor shall accomplish and provide all labor, material, and equipment necessary to perform the purchase, install CCTV and Access Control Equipment at the Springfield MEPS located at 551 Airlift Drive, Westover ARB, and Chicopee, MA 01022.

5.2. Task Heading. The contractor shall accomplish and provide all labor, material, and equipment necessary to perform the purchase, install CCTV and Access Control Equipment at the Springfield MEPS located at 551 Airlift Drive, Westover ARB, Chicopee, MA 01022.

A Install the following at reference point A:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (MEPS personnel must be able to use their existing common access cards on card readers) (tie into access control system)

Replace Intrusion Detection System keypad with an Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

One A iPhone (video/audio) door station (replacement for existing door station at main entry door)

B Install the following at reference point B:

Install one exterior low light, high resolution, color cameras mini-domed, fixed position (IR

LEDs ≈100', Color, 700TVL, 12VDC/24VAC, 4‐9mm, IP65, White Housing) covering main entry doors and area under overhang (tie into CCTV system) (Refer to attachment 2 for additional location reference)

C Install the following at reference point C:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (MEPS personnel must be able to use their existing common access cards on card readers)

One electronic door strike with A iPhone master station release located at the main control desk

D Install the following at reference point D:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

E Install the following at reference point E:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

F Install the following at reference point F:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS)

G Install the following at reference point G:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

One Infratouch Touchless Keypad compatible with existing security alarm system (tie into existing IDS) H Install the following at reference point H:

One A iPhone (video/audio) master station with 7” screen (replacement for existing door intercom system) with release for the following doors: main doors (Item A), secondary doors (Item C)

One 32 channel digital video recorder (DVR) w/CD-RW, 5TB – 10TB hard drive (replacement for existing 16 channel DVR) (tie into existing CCTV system)

One 40” color CCTV flat panel monitor (replacement for existing CCTV monitor) (tie into existing CCTV system) on top of main control desk

I Install the following at reference point I:

One 32” color CCTV flat panel monitor (replacement for existing CCTV monitor) (tie into existing CCTV system) on top of CAT/ASVAB test administrator’s desk J Install the following at reference point J:

Install one interior, low light, high resolution, color camera, mini-domed, ceiling mounted (IR LEDs ≈100', Color, 700TVL, 12VDC/24VAC, 4‐9mm, IP65, White Housing) covering medical section applicant’s waiting area (tie into existing CCTV system) (Refer to attachment 2 for additional location reference)

K Install the following at reference point K:

Install one interior, low light, high resolution, color camera, mini-domed, ceiling mounted (IR

LEDs ≈100', Color, 700TVL, 12VDC/24VAC, 4‐9mm, IP65, White Housing) covering down hallway (tie into existing CCTV system) (Refer to attachment 2 for additional location reference)

L Install the following at reference point L:

One individually programmable stand-alone card reader (HSPD-12, FIPS 201, CAC compliant) (tie into access control system) (MEPS personnel must be able to use their existing common access cards on card readers)

Appropriate software/equipment for access control management (Recommended Access Control System – Tyco Security Products CCURE 9000 Site Server with Event Management Software) Appropriate CPU/laptop for access control management (Recommended Access Control System – Tyco Security Products CCURE 9000 Site Server with Event Management Software) One uninterrupted power supply/battery backup with 24 hours of operational power during power outages Twenty-five blank programmable FIPS 201 compliant cards (to be issued to non-CAC holders e.g.

cleaning crew) Provide training on the administration and operation of the CCURE access control system

5.2.1 All exposed wiring must be incased in conduit, however, the contractor shall minimize use of conduit by installing wire in walls and above ceiling whenever possible.

5.3. CONTRACTOR MANAGEMENT REPORTING (CMR): The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor shall report ALL Contractor manpower (including subcontractor manpower) required for performance of this contract. The Contractor shall completely fill in all the information in the format using the following web address https://Contractormanpower.army.pentagon.mil. The required information includes: (1) Contracting Office, Contracting Officer, Contracting Officer’s Technical Representative (COTR) or also known as the Contracting Officer’s Representative (COR); (2) Contract number, including task and delivery order number; (3) Beginning and ending dates covered by reporting period; (4) Contractor's name, address, phone number, e-mail address, identity of Contractor employee entering data;

(5) Estimated direct labor hours (including sub-Contractors); (6) Estimated direct labor dollars paid this reporting period (including sub-Contractors); (7) Total payments (including sub-Contractors); (8) Predominant Federal Service Code (FSC) reflecting services provided by Contractor (and separate predominant FSC for each sub-Contractor if different); (9) Estimated data collection cost; (10) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the

Army Requiring Activity is responsible for providing the Contractor with its UIC for the purposes of reporting this information); (11) Locations where Contractor and sub-Contractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas location, using standardized nomenclature provided on website); (12) Presence of deployment or contingency contract language; and (13) Number of Contractor and sub-Contractor employees deployed in theater this reporting period (by country). As part of its submission, the Contractor shall provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period shall be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year. Contractors may use a direct XML data transfer to the database server or fill in the fields on the website. The XML direct transfer is a format for transferring files from a Contractor’s system to the secure website without the need for separate data entries for each required data element at the website. The specific formats for the XML direct transfer may be downloaded from the website.

PART 6

APPLICABLE PUBLICATIONS

6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS)

6.1. The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures. Specifically, USMEPCOM Regulation 380-1, Security Program, Army Regulation 190-13, The Army Physical Security Program and Homeland Security Presidential Directive 12, Policy for a Common Identification Standard for Federal Employees and Contractors

PART 7

ATTACHMENT/TECHNICAL EXHIBIT LISTING

7. Attachment/Technical Exhibit List:

7.1. Attachment 1/Technical Exhibit 1 – Performance Requirements Summary

7.2. Attachment 2/Technical Exhibit 2 – Deliverables Schedule

7.3 Attachment 3/Technical Exhibit 3 – Estimated Workload Data

TECHNICAL EXHIBIT 1

Performance Requirements Summary

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance Requirements Summary

PERFORMANCE

OBJECTIVE

PERFORMANCE

STANDARD

PERFORMANCE

THRESHOLD

INCENTIVE /

DECENTIVE

The contractor shall accomplish and provide all labor, material, and equipment necessary to perform the purchase, install CCTV and Access Control Equipment at the Springfield MEPS located at 551 Airlift Drive, Westover ARB, Chicopee, MA 01022 as defined in this Performance Work Statement except for those items specified as government furnished property and services.

Within 4-6 weeks after contract award

100%. This metric shall be reported quarterly by the contractor in their staffing report

Payments will be based on successful completion of the milestones.

TECHNICAL EXHIBIT 2

DELIVERABLES SCHEDULE

PWS

SECTION

TITLE FORMAT DATE REQUIRED FREQUENCY COPIES DISTRO

1.4.8 AT Level I

Training Contractor and subcontractor employees supporting contract

Training Certificates

Within 30 calendar days of contract award/ within 10 calendar days after completion, if a COR is not assigned

Once, then submit certificates for new personnel as changes occur

1 COR

1.4.9 iWATCH Training

Training Certificates

Within 30 calendar days of contract award/ within 60 calendar days of new employees commencing performance with the results reported to the COR NLT 10 calendar days.

Once as required 1 COR

1.4.10 OPSEC

Training

Training Certificates

Annually by all effected employee.

Contractors shall follow the

USMEPCOM OPSEC

policies and regulations

Once as required 1 COR

TECHNICAL EXHIBIT 3

ESTIMATED WORKLOAD DATA

ITEM

NAME

ESTIMATED QUANTITY

1 NA ________

2 ________

3 ________

4 ________

5 ________