Salient Characteristics.pdf

SALIENT CHARACTERISTICS

# ITEM AND DESCRIPTION UNIT OF

ISSUE

QUANITY

1 Hexagon Barbell- Hexagon bar/trap-bar (No D-Handles) Olympic size;

weight 60lb (unloaded) must be within 2 pounds of claimed weight, durable hexagonal frame welded from 1.5" square steel tubing (1.5"SCH 80 pipe sleeves);

16.4" of loadable sleeve length (to accommodate four each 45lb bumper plates w/collar); both sets of knurled, parallel handles measure 1.34" diameter and are spaced 25" on center; hexagon bar requires rust proofing; required to have a solid sleeve design

EA 1320

2 Recon Lite Bumper 45lb Bumper plate- Should be constructed of vulcanized rubber and a 2" stainless steel insert collar on bumper plates should be inset from the plane of the plate, allowing for better protection when multiple plates are on the bar and reducing the risk of inserts getting impacted or popping out; plate width 3 3/4"; standard diameter 450mm (17.7165 inch); solid rugger plates mad from virgin or high quality recycled rubber; shore durometer a 87.7-88.3; collar opening: 50.4mm; Insert type:

forged stainless steel; bumper plate stainless steel;

bumper plate thickness measurements are within 1/16" of an inch; weight tolerance: +/- 1% of claimed weight

EA 2640

3 Barbell collar Plastic or metal 2" x 2" barbell collar; 1 to 2lbs per pair; must ensure collar/spring and bar selected are fully compatible; fits allowable range between 1.937 to

2.016 inches;

EA 1320

4 Kettlebell Rack- Must met the following specifications: 3-4 tier rack to hold 24 kettlebells ranging in weight of 10lbs to 50lbs

EA 660

5 Hexbar Rack-vertical Bar storage unit- Must be able to hold an Olympic sleeve sized bar in 10 or more bar configuration

EA 110

6 Troy Kettlebell 10lbs- Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 3300

7 Troy Kettlebell 15lbs Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 3960

8 Troy Kettlebell 20lbs- Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 2640

9 Troy Kettlebell 25lbs- Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 2640

10 Troy Kettlebell 30lbs- Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 2640

11 Troy Kettlebell 40lbs- Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 2640

12 Troy Kettlebell 50lbs- Should be made of a natural, slip free texture with a seamless and even finish. Cast Iron or steel construction, powder coated, approximate height: 11", approximate diameter 8", able to accommodate hands of a size 7, one-piece design, flat base

EA 660

13 Bumper plate rack- Must meet the following specifications: heavy duty horizontal bumper plate storage rack capability of holding 8; 45lb plates

EA 330