NOTICE_OF_INTENT_TO_AWARD_SOLE_SOURCE.pdf

NOTICE OF INTENT TO AWARD SOLE SOURCE

MICC – Fort Jackson, SC, intends to award a sole source purchase order to MIL- SIM-FX International Inc., as a result of them being the only qualified vendor to provide the following training simulation items with the specified salient characteristics:

Quantity

Description

6 ea

IED THREAT SIM - 180 DEGREE

•IED Threat Simulator with 180 degree Spray pattern that offers both a visual and audio effect

6 ea

DIRECTIONAL

C H ARGE/IMPROVISED

CLAYMORE W/20 INCH

TUBE

•Mounted or dismounted convoy training device that simulates a claymore mine that offers both a visual and audio effect.

21 ea

CONCUSSIVE FX IED

THREAT SIM W/20

INCH TUBE

•Non‐directional concussive effects device used to achieve a significant audio signature

3 ea

BOMB IED THREAT

SIM W/20 INCH TUBE

•Improvised bomb for detection / reaction drills •Mounted or dismounted convoy training

DET CORD TO

NOSE CONE IED

W/20 INCH TUBE

•Improvised ordnance round with nose cone firing actuator for detection / reaction drills

105MM IED THREATSIM W/20 INCH

TUBE AND 110 DEGREE SPRAY PATTERN.

•Improvised ordnance round for detection / reaction drills

20 ea

HAND HELD ACTIVATOR

•Detonates any MIL‐SIM‐FX device

•Uses disposable 12 gram cartridge for initiation •Command detonation

75MM E DETONATOR KIT

INCLUDES MIL-RX-75S IN A FIELD CASE

•Single Air Solenoid Trigger and Compressed Air Chamber Set •Radio controlled detonator with 2 Channel Transmitter •315 MHz ‐ 500 Feet LOS •Allows for two consecutive detonations •Uses low pressure compressed air for initiation

QUICK FILL - AIR FILL DEVICE

•Used for filling Compressed Air Chambers •Uses disposable 12 gram cartridges

250 ea

HFV BOTTLE W/ BLUE MAG CAP

•Refillable high pressure bottle with high flow valve

•Includes magnetic thread/pin protector cap

•Light weight alloy steel cylinder •Machined brass

25 ea

MAGNETIC TANK VALVE CAP

BLUE

•HFV bottle thread/pin protector cap •Magnetic •Machined aluminum, light blue anodized finish

This purchase will be made under Simplified Acquisition Procedures and Other than Full and Open Competition as authorized by FAR 6.302-1(a)(2) & 13.106(b).

The anticipated award date is after 12 July 2017. Please note that this is not a request for competitive proposals. However, all interested parties who believe they can meet the requirements are invited to submit in writing complete information describing their ability to provide the product/services listed above. Deadline date for the submittals is 7 July 2017 at 2 pm EST.

A determination by the government not to compete this requirement based on responses to this notice is solely within the discretion of the government.

Information received will be considered solely for determining whether to conduct a competitive procurement.

For information regarding this purchase, contact Julian Bargas Jr., Contract Specialist, at (803) 751-7700 or Julian.bargas.civ@mail.mil.