Button_Deviation.pdf
PDF 93 KB Posted
- Attached to
- Buttons, Burrs, and Toggles Federal contract opportunity
- Solicitation number
- W911SD-18-T-0043-01
- Issued by
- Department of the Army
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMSAS-OMI-W
Deviations To
MIL-DTL-1563C (DTD 8 October 1997)
Buttons, Insignia and Findings (USMA)
1. Detail 5A, Insignia, USMA, Button, Ball 30 Ligne.
A) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.”
2. Detail 6A, Insignia, USMA, Button, 25 Ligne.
A) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition
3. Detail 7A, Insignia, USMA Button, 36 Ligne.
A) Change Note 2: From: The attaching device shall be stem and backshell type and shall conform to the dimensions shown above.
To: “The attaching device shall be stem and concave backshell type and shall conform to the dimensions shown above.”
B) Change Note 4: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition
C) Change Note 5: Add: “7/32 inch or 0.56 cm.”
4. Detail 10A, Insignia, USMA Button, 30 Ligne.
A) Change Note 3: From: Stems shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “Stems shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.”
B) Add Dash Numbers: Add: -1, ½” stem, Gold polished finish
Add: -2, ¼” stem, Nickel polished finish.
5. Detail 20A, Insignia, USMA, Ball, 30 Ligne with Tack Back.
A) Change Note 3: From: The tack back shall be swedged, hard or soft soldered to the back shell and symmetrically located as shown.
To: “The tack back shall be swedged, epoxied or hard or soft soldered and symmetrically located as shown. Epoxy will be of a composition to sustain adhesion through 50 industrial dry cleanings.”
File details come from the government source that posted it.