Synopsis_GIAB.pdf

This synopsis is for informational purposes only. This is not a request for quotes and no solicitation exists.

The Mission & Installation Contracting Command (MICC), Fort Drum, NY is seeking multiple businesses willing to enter into a Blanket Purchase Agreement (BPA) for supplies under the

North American Industry Classification Code (NAICS) 339920: Sporting and Athletic Good

Manufacturing Contractors. The small business size standard for this industry is 750 Employees.

REQUIREMENT: Gym in a Box (GIAB) (example of requirement is below)

CONSIDERATION:

IAW FAR 13.303 Blanket Purchase Agreements will be established with suppliers whose past performance has shown them to be dependable, timely, who offer quality supplies or services at consistently lower prices, and who have provided numerous purchases at or below the simplified acquisition threshold of this nature.

BPAs will be evaluated annually and may remain in place for up to five years.

In order to be considered, the Contractor shall provide with their response to the synopsis, a list of contracts that your company has completed delivering on time for the GIAB.

There will be times when the Government utilizes Unison (formerly known as FedBid) in order to compete the calls. The Contractor shall register with Unison once the master Purchase

Agreement is signed. The website to register is https://marketplace.unisonglobal.com, phone:

877-933-3243.

As prescribed in DFARS 252.204-7004, interested parties must be registered with the System for

Award Management (SAM) under the NAICS 339920. This can be done by accessing the internet at www.sam.gov or calling 1-866-606-8220. Representations and certifications must also be on record through SAM at www.sam.gov.

Calls will be paid through Wide Area Workflow (WAWF). To register and access WAWF, go to https://wawf.eb.mil/.

RESPONSES DUE: July 22, 2019

RESPOND TO: Any interested party may inquire with the following Contract Specialist via email: ernie.a.ixtlahuac.civ@mail.mil . Any correspondence relating to this synopsis should have

"GIAB BPA" noted in the subject field.

The below specifications is a sample of what will be required. The individual calls will specify the exact equipment being purchased.

https://marketplace.unisonglobal.com/ http://www.sam.gov/ https://wawf.eb.mil/

Gym-In-A-Box

The size of the container must be:

External Length 96 inches

External Width 77.5 inches

External Height 96 inches

Door Opening Width 73.75 inches

Door Opening Height 85.187 inches

Payload Weight 7,500 lbs

Box must have a USAU number (International Organization for Standardization [ISO] number) located on the front and side of the box. See Attached Defense Transportation Regulation excerpt

Chapter 603. Consider the ISO number as the unique identifier or the “license plate” for the container and is required to determine who owns the container (DoD or Commercial).

International law requires container owners to maintain a register of assets. The DOD ISO register cannot be altered without authorization.

Must fit on a 463L Pallet

Length 108 inches

Width 88 inches

Total load capacity 10,000 lbs (this means box and equipment total combined weight cannot exceed 10,000 lbs)

Four (4) fitness training stations self-contained within a certified shipping container. All equipment shall align with specifications outlined in Field Manual (FM) 7-22.

Equipment per station:

One (1) Multifunctional squat, dip, pull-up station **pull-up station shall meet FM 7-22 specs

One (1) 20kg Olympic lifting barbell

One (1) Hexagon/trap barbell with extended loading sleeve length **shall meet ACFT

Hexagon/Trap Bar specs

One (1) Set bumper/plates, 245lb (2 x 45lb, 2 x 35lb, 2 x 25lb, 2 x 10lb, 2 x 5lb

One (1) Set Metal Plates, 5lb (2 x 2.5lb)

One (1) Pair lifting bar collars

One (1) Landmine attachment

One (1) Utility bench (incline/decline)

One (1) Set Kettlebells (1 x 6kg, 1 x 8kg, 1 x 12kg, 1 x 16kg, 1 x 20kg, 1 x 24kg)

One (1) Set Soft Medicine balls (1 x 10lb, 1 x 12lb, 1 x 14lb, 1 x 16lb, 1 x 18lb, 1 x 20lb)

One (1) Set mini resistance bands (5 x light, 5 x medium, 5 x heavy, 5 x extra heavy)

One (1) Set large resistance bands (1 x 100lb/black, 1 x 65lb/green, 1 x 50lb/blue, 1 x 30lb/red, 1 x 15lb/orange)

One (1) Agility ladder

One (1) Jump rope

One (1) Suspension trainer

One (1) Balance trainer

One (1) 12 foot climbing rope

One (1) Battle Rope

One (1) Sandbag Trainer, Small (1 x 10-40 lb)

One (1) Sandbag Trainer, Large (1 x 20-80 lb)

One (1) Push/pull sled with attachments (1 x tow strap, 1 x chest harness, 1 x soft hand attachments)

One (1) Foam Roller, Textured

One (1) Foam roller, Smooth

One (1) Massage stick

One (1) Recovery ball

One (1) Fitness mat

Additional equipment (one of the below sets per box):

One (1) 15kg Olympic lifting barbell

One (1) Safety squat barbell

Two (2) Flexible Drag Sled with Straps

Two (2) Rigid Medicine ball (1 x 10lb)

Six (6) Adjustable hurdles

Twenty (20) agility cones

* Equipment specifications/descriptions on the following pages.

EQUIPMENT SPECIFICATIONS

NOTE: Photos are examples and not intended to favor specific brands.

Equipment per station:

1. Multifunctional squat, dip, pull-up station

a. Squat specifications- Two stable, corrosion resistant vertical supports to be used as mechanical safety device during barbell squat exercises. Distance between two vertical supports is approximately 45 inches (no more than 50 inches); two secure, height adjustable J-cups;

minimum weight capacity of 600 pounds for supports and J-cups.

b. Dip specifications- Two stable, corrosion resistant horizontal bars; distance between two vertical bars is 18-25 inches in order to accommodate a wide range of body widths; minimum weight capacity of 600 pounds.

c. Pull-up specifications- Meets Army Field Manual 7-22 (FM 7-22) climbing bar specifications

(e.g., 1.5 inch bar diameter, 62 inches of usable bar space, 7.5 to 8.0 feet above ground with step-up assistance at 18 and 24 inches above ground).

2. 20-kg Barbell

a. 44.09 lbs (20 kg) total weight

b. High tensile strength (minimum of 190,000 psi)

c. Shaft: Corrosion resistant; 1 inch grip diameter

d. Bearings: Free spinning

e. Sleeves: 2 inch diameter, 16.4 inch loadable sleeve length

3. Hexagon/trap barbell with extended loading sleeves

a. 60 lbs (27.2 kg) total weight

b. Meets Army Combat Fitness Test (ACFT) equipment specifications

c. Corrosion resistant (e.g., black oxide bare steel, bright zinc, black zinc chrome, nickel, and phosphorous zinc plate).

d. Frame: Durable hexagonal frame welded from 1.5 inch square steel tubing (1.5 inch 80 pipe sleeves)

e. Handles: knurled, parallel handles, spaced 25 inches apart on center, 1.34 inch grip diameter

f. Sleeves: 2 inch diameter, 16.4 inch loadable sleeve length

4. Bumper plates

a. Solid, made from virgin or high quality recycled rubber

b. 17.7165 inches (450 mm) diameter

c. Shore durometer: A 87.7 – 88.3

d. Collar opening: 2 inches diameter

e. Insert type: forged stainless steel

f. Thickness: 10 lb plate (1 3/8 inches), 15 lb plate (1 7/8 inches), 25 lb plate (2 1/4 inches), 35 lb plate (3 1/8 inches), 45 lb plate (3 3/4 inches)

g. Compatible with 20-kg, 15-kg, and hexagon/trap barbells

h. Color: non-specific

5. Urethane Plates

a. Coating: Urethane

b. Collar opening: 2 inches diameter

c. Compatible with 20-kg, 15-kg, and hexagon/trap barbells

d. Color: non-specific

6. Barbell collars

a. Durable plastic or metal

b. Opening/closing: quick release

c. Collar opening: 2 inches diameter

d. Weight: Up to 2 lbs per pair

d. Compatible with 20-kg, 15-kg, and hexagon/trap barbells

e. Color: non-specific

7. Landmine attachment

a. Durable and corrosion resistant

b. Receiver tube: 2 inches inside diameter

c. Anchor: easily attaches to squat/pull-up/dip rack

d. Compatible with 20-kg and 15-kg barbells

8. Utility Bench (incline/decline)

a. Durable

b. Frame: Corrosion resistant

c. Bench: Rip resistant cushioning

d. Adjustability: Positions of lying flat, sitting incline, and sitting decline

9. Kettlebell

a. Single solid iron or steel casting (no welding)

b. Coating: Powder coating with slip free texture and even finish

c. Hand grip: large enough for 2-handed grip

d. Base: flat

10. Soft Medicine Balls

a. Soft durable vinyl shell

b. Approximately 14 inch diameter

c. Impact absorbing, moisture resistant, scuff resistant

d. Balanced & uniformly weighted ball that allows minimal bounce

e. Double or triple stitched seams.

11. Mini resistance bands

a. Forms 12 inch loop when unstretched

b. 2 inches in width c Color: coded for resistance level

12. Large resistance bands

a. Forms approximately 40 inch loop when unstretched

b. Color: coded for resistance level

13. Agility ladder

a. Collapsible

b. Durable solid rungs approximately 15-17 inches long and 15 inches apart

c. Ladder length: 15-20 feet

14. Jump rope

a. Lightweight

b. Durable

c. Rope/cable adjustable to 7 to 9.5 feet in length

d. Handles: Two lightweight pivoting handles

15. Suspension trainer

a. 1.5 inch heavy duty military grade webbing strap

b. Corrosion resistant cam buckles

c. Two soft rubber covered handles

d. Double stitching at all seams and connections

e. Center mounting point.

16. Balance trainer

a. Hemispherical, inflatable ball with a rigid flat base

b. Inflatable section is puncture and burst resistant; approximately 25 inch diameter

c. Minimum 300 pound weight capacity

d. Commercial grade for high volume use

17. Climbing rope

a. 1.5 inch diameter

b. 20 feet length

c. Durable braided manila

d. Braided eyelet

18. Battle rope

a. 1.5 inch diameter

b. 30 feet length

c. Durable braided nylon

19. Sandbag trainer

a. Durable, rip resistant material

b. Fillable to 10-40 pounds (for small) and 20-80 pounds (for large)

c. Minimum of two handles on length and two handles on width

d. Heavy-duty double stitching at seams and handles

20. Sled trainer- Push/Pull weight Sled

a. Constructed of 2 x 3 inch 11 gauge powder-coated steel with ¼ inch plate steel base

b. Two 36 inch upright push bars

c. ≥17 inch center weight post with minimum 300 lb capacity

d. Pull rope attachment with 100 foot pull rope

e. 9 foot heavy duty 1.5 inch nylon dragging strap

f. Adjustable 3 inch wide nylon webbing shoulder harness with reinforced stitching, steel buckles and front and rear anchor points

21. Foam roller, textured

a. Hard plastic cylinder core

b. 5-6 inches in diameter

c. 36 inches in length

d. Covered in cushioned texture with ridges

22. Foam roller, smooth

a. Solid high-density expanded polypropylene cylinder

b. 5-6 inches in diameter

c. 36 inches in length

d. Smooth outer surface

e. Durable and maintains shape after heavy use

23. Massage stick

a. Firm muscle roller material providing consistent distribution of pressure

b. Non slip grips

c. 18-20 inches long

24. Recovery ball

a. Smooth, non textured surface

b. Solid Rubber Construction

c. 0.75 - 2.8 inches diameter

d. Color: non-specific

25. Fitness mat

a. Lightweight poly foam material

b. Easy to roll up

c. Durable, tear resistant

d. Approximately 0.25 inches thick

e. Approximately 72 inches in length

f. Approximately 24 inches in width

g. Color: non-specific

26. 15-kg Olympic lifting barbell

a. 33.1 lbs (15 kg) total weight

b. High tensile strength (minimum of 190,000 psi)

c. Shaft: Corrosion resistant; 1 inch grip diameter

d. Bearings: Free spinning

e. Sleeves: 2 inch diameter, 13 inch loadable sleeve length

27. Safety squat barbell

a. Cambered bar (sleeves not aligned with bar shaft)

b. Shaft: Corrosion resistant; 1 inch grip diameter

c. Sleeves: 2 inch diameter

d. Handles: Corrosion resistant; 1-1.5 inch diameter

e. Pads: Heavy duty vinyl covered foam

28. Flexible drag sled with straps

a. Flat flexible surface upon which bumper plates can be attached

b. Attachment point for pulling straps

c. Made of thick, heavy-duty nylon

d. 22 inches in length

e. 19.5 inches wide

f. Securely accommodates four 45-pound bumper plates

g. Approximately 90 inch strap with two handles for pulling

29. Rigid Medicine Balls

a. Made of hard rubber specifically designed to withstand normal impact

b. Heavy duty, non-malleable (i.e., not a slam ball)

c. Inflatable

d. Non-shifting, centered weight profile

e. Weather proof

f. Color: non-specific

30. Adjustable hurdles

a. Lightweight, durable

b. Adjustable to at least two heights between 6 and 12 inches

c. Self-righting design

d. Appropriate for outdoor use

31. Agility Cones

a. Crush and crack resistant plastic

b. Stackable cones/domes

c. Between 2-4 inches in height

d. Color: High visibility