SOW_-_Hexagon_Metrology.docx

January 12, 2019 Scope of Work: Block Service Agreement (BSA) Vendor: Hexagon Metrology Hexagon Metrology will perform on-site service at a discounted rate with the block service agreement for the Apollo RS-150 and Sheffield 1808. Maintenance will be requested as needed when either of these machines are not running properly. Prior to work being completed, a quotation will be provided to the end user for approval.

Scope of Work: PC-DMIS Software Maintenance Agreement (SMA) Vendor: Hexagon Metrology Hexagon Metrology will perform software maintenance for each CMM at the WVA. These machines require software upgrades that need to be done yearly to ensure that machines are running properly. The upgrades are done by installing new software into each CMM. The software upgrades allow for the upgrades to streamline the inspection process, unlimited access and technical support as well as remote assistance and customer relations representation. Listing of machines is noted below.

Scope of Work: PC-DMIS Calibration Maintenance Agreement (CMA) Vendor: Hexagon Metrology Hexagon Metrology will perform calibration and system maintenance for each CMM at the WVA. These machines require technical calibrations that need to be done yearly, updating the system data files to adjust for machine squareness and linearity error. The calibrations are to be performed by qualified technicians utilizing software that can access the machines operating files. The calibration upgrades allow for the system to perform inspections with a high level of confidence in results.

Machines covered under CMA/SMA:

1. 0411-6509UA - Port Lock 220116

2. 0815-1461UA - EID

3. 0516-1449UA - EID

4. M-0060-0997 - 208732

5. 2-4926-1185 - 208733

6. 0694-326 - 208735

7. 0694-325 - 208736

8. 0516-6120UA - EID

9. 0817-6518 - EID

10. 0117-6301 - EID

11. 0117-6302 - EID

Technical Point of Contact for these actions is Seth Frank, Machine Tool Inspector, Watervliet Arsenal.