Revised_SOW_17_APR_19.doc

DESCRIPTION/WORK STATEMENT/SPECIFICATION

1.0 Scope. This specification establishes the requirement for one (1) JLG T32E Boom Lift, one (1) Tow Pro T500J, Two (2) JLG 20 MVL, one (1) JLG Model 2646ES Scissor Lift and one (1) JLG 450AJ to be provided to Anniston Army Depot, Anniston, Alabama. The equipment shall be designed and fabricated by the Contractor with all functionality, capabilities and features as described herein. The Contractor shall provide all resources necessary to design, manufacture, deliver, and demonstrate functional operation of the equipment. The specific models listed are preferred but an equal that meets these specs is acceptable.

2.0 Order of Precedence. In the event of a conflict between the text of this Equipment specification and the references cited herein, the more stringent regulation or specification shall take precedence, unless a specific exception to this, order of precedence, is noted in this Equipment specification. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained by the Government.

3.0 Requirements: JLG T32E Boom Lift (1ea). This specification provides the requirements for a two wheel drive, electric powered, rubber tired mast style boom lift with articulating jib. The articulating boom lift shall include two wheel drive capability, 32.3 foot minimum platform height, 15 foot minimum horizontal outreach, 500 pound capacity platform with lanyard anchorage points, operating alarm and light. The mast style boom lift with articulating jib shall be a product produced as the manufacturer's current production model.

3.1 General Requirements.

3.1.1 The mast style boom lift with articulating jib shall have a platform capacity of 500 pounds.

3.1.2 The mast style boom lift with articulating jib shall be suitable for industrial use in an industrial work application. All parts that are subject to wear, breakage or distortion shall be accessible for adjustment, replacement as interchangeable components and repairable.

3.1.3 The mast style boom lift with articulating jib shall have an AC direct electric drive motor. The articulating boom lift shall be equipped with a 48 volt DC battery with charging system.

3.1.4 The mast style boom lift with articulating jib shall be the latest model of the manufacturer's basic commercial product and shall have been in production, marketed, and in use for a minimum of one year preceding the solicitation for procurement.

3.1.5 The mast style boom lift with articulating jib shall be equipped with standard instruments, components and accessories normally required for the safe and effective operation of the lift. The mast style boom lift with articulating jib shall be complete with all components that are listed as standard on the contractor's literature for the basic product, whether stipulated herein or not, together with such accessories and options as may be specified herein.

3.1.6 The mast style boom lift with articulating jib shall have the capability of 360 degree non-continuous swing and 120 degree range of jib rotation.

3.1.7 The mast style boom lift with articulating jib shall have two or four wheel steering capability.

3.1.8 The mast style boom lift with articulating jib shall be equipped with all other components and parts not specifically mentioned but necessary to provide a functional machine and shall conform, in quality, to that normally provided to the commercial industry. Mast style boom lift with articulating jib requirements shall be as specified herein.

3.2 Equipment Components and Subsystems-Design Features and Mechanical Construction.

3.2.1 Safety.

The mast style boom lift with articulating jib shall conform to the OSHA requirement 1910 for General Industry and 1910.68 requirement for man lifts.

3.2.2 Dimensions.

Dimensions and weight shall be:

a. Wheelbase = 5 feet 3 inches

b. Ground clearance = 3.1 inches

c. Overall length (Stowed) = 11 feet 8 inches

d. Overall width = 3 feet 9 inches

e. Overall height (Stowed) = 6 feet 5 inches

f. Platform Load capacity = 500 pounds or greater

g. Overall weight = not to exceed 9,500 pounds

h. Tail swing = not to exceed 6 inches 3.2.3 Drive train.

The mast style boom lift with articulating jib shall be equipped with a two wheel drive capable drive train with reverse.

3.2.4 Enclosures and Shields.

All electrical components including wiring shall be so located or protected by adequate means to prevent contact with or the entrance of water.

3.2.5 Wheels.

The mast style boom lift with articulating jib shall have steel wheels.

3.2.6 Tires.

Tires shall be size 18 x 7 x 12.12 Non-marking solid rubber or equivalent. The tires shall be new and unused. Composition shall be rubber.

3.2.7 Controls and Instrumentation.

All controls and instrumentation shall be provided with position markings.

3.2.8 Key Switch.

An individual key-operated on-off switch shall be furnished. Two keys shall be furnished with each articulating boom lift.

3.2.10 Lights.

The mast style boom lift with articulating jib shall be equipped with a flashing operation light.

3.2.11 Human Factors Performance Features and Operating Performance Data.

Performance feature shall include:

a. Multifunction display showing this information at a minimum: multifunction hour meters.

b. All words on instruments, control panels, charts, and plates shall be in the English language. Characters shall be permanently marked in boldface on a contrasting background. All plates shall be corrosion resistant.

3.2.12 Performance Criteria.

a. Maximum travel speed (Stowed), = 3.4 mph

b. Load capacity = 500 pounds or greater c.

Outside turning radius shall be 8 feet 6 inches 3.3 Accessory Equipment.

3.3.1 The mast style boom lift with articulating jib shall be equipped with all standard and optional equipment to enable it to operate normally at full capacity in any ambient temperature from 0°F to +120°F.

4.0 Requirements: Tow Pro T500J (1). This specification provides the requirements for a towable, gasoline powered, rubber tired articulating boom lift. The articulating boom lift shall include 50 foot minimum platform height, and 500 pound capacity platform with lanyard anchorage points, and operating alarm and light. The articulating boom lift shall be a product produced as the manufacturer's current production model.

4.1 General Requirements.

4.1.1 The articulating boom lift shall have a platform capacity of 500 pounds.

4.1.2 The articulating boom lift shall be suitable for industrial use in an industrial work application. All parts that are subject to wear, breakage or distortion shall be accessible for adjustment, replacement as interchangeable components and repairable.

4.1.3 The articulating boom lift shall have a gasoline powered engine. The articulating boom lift shall be equipped with a battery with electric starting capability.

4.1.4 The articulating boom lift shall be the latest model of the manufacturer's basic commercial product and shall have been in production, marketed, and in use for a minimum of one year preceding the solicitation for procurement.

4.1.5 The articulating boom lift shall be equipped with standard instruments, components and accessories normally required for the safe and effective operation of the lift. The articulating boom lift shall be complete with all components that are listed as standard on the contractor's literature for the basic product, whether stipulated herein or not, together with such accessories and options as may be specified herein.

4.1.6 The articulating boom lift shall have the capability of 410 degree non-continuous swing and 130 degree range of vertical jib rotation.

4.1.7 The articulating boom lift shall towable up-to 65 MPH.

4.1.8 The articulating boom lift shall be equipped with all other components and parts not specifically mentioned but necessary to provide a functional machine and shall conform, in quality, to that normally provided to the commercial industry. Articulating boom lift requirements shall be as specified herein.

4.2 Equipment Components and Subsystems-Design Features and Mechanical Construction.

4.2.1 Safety.

The articulating boom lift shall conform to the OSHA requirement 1910 for General Industry and 1910.68 requirement for man lifts.

4.2.2 Dimensions.

Dimensions and weight shall be:

a. Ground clearance = 1 feet 3 inches

b. Overall length (Stowed) = 27 feet 4 inches

c. Overall width = 5 feet 7 inches

d. Overall height (Stowed) = 7 feet 5 inches

e. Platform Load capacity = 440 pounds or greater (with rotator)

f. Overall weight = 4800 pounds

g. Outrigger Footprint Length = 12 feet 4 inches

h. Outrigger Footprint Width = 12 feet 8 inches 4.2.3 Engine.

The articulating boom lift shall be equipped with a 9 HP gasoline engine. The engine shall have a spin on canister type oil filter and a dry replaceable type air filter. The engine shall have an electric starting capability. The engine must have a muffler with US Forest Service approved spark arrestor.

4.2.4 Enclosures and Shields.

All electrical components including wiring shall be so located or protected by adequate means to prevent contact with or the entrance of water.

4.2.5 Wheels.

The articulating boom lift shall have steel wheels.

4.2.6 Tires.

Tires shall be size ST225/75 R15 Pneumatic or equivalent. The tires shall be new and unused. Composition shall be rubber.

4.2.7 Controls and Instrumentation.

All controls and instrumentation shall be provided with position markings.

4.2.8 Key Switch.

An individual key-operated on-off switch shall be furnished. Two keys shall be furnished with each articulating boom lift.

4.2.9 Lights.

The articulating boom lift shall be equipped with a flashing operation light.

4.2.10 Human Factors Performance Features and Operating Performance Data.

Performance feature shall include:

a. Multifunction display showing this information at a minimum: multifunction hour meters.

b. All words on instruments, control panels, charts, and plates shall be in the English language. Characters shall be permanently marked in boldface on a contrasting background. All plates shall be corrosion resistant.

4.2.11 Performance Criteria.

a. Maximum travel speed (towing), = 65 mph

b. Load capacity = 440 pounds or greater (with rotator)

c. Platform Height = 50 ft. 9.5 in.

d. Working Outreach = 31 ft. 6 in.

e. Up and Over Height = 18 ft.

f. Leveling Capability = 11 Degrees

g. Swing = 410 Degrees Non-Continuous

4.3 Equipment Features and Accessories.

a. Platform, Side Entry: 30 x 48 in.

b. Proportional Controls

c. 110V-AC Receptacle in the Platform

d. Auto-Leveling Hydraulic Outriggers

e. Motion Alarm

f. Tilt Alarm/Indicator Light

g. Hour meter

h. Parking Brake

i. 2 in. Hitch with Adjustable Height Coupler

j. Standard Air and Water Lines to Platform

k. Platform Rotator

l. Full-Size Spare Tire

m. Flashing Amber Beacon 4.3.1 The articulating boom lift shall be equipped with all standard and optional equipment to enable it to operate normally at full capacity in any ambient temperature from 0°F to +120°F.

5.0 Requirements: JLG 20 MVL (2). This specification provides the requirements for an electric powered, rubber tired mobile vertical lift. The mobile vertical lift shall include 19 ft. minimum platform height, and 350 pound capacity platform with lanyard anchorage points, and operating alarm and light. The mobile vertical lift shall be a product produced as the manufacturer's current production model.

5.1 General Requirements.

5.1.1 The mobile vertical lift shall have a platform capacity of 350 pounds.

5.1.2 The mobile vertical lift shall be suitable for industrial use in an industrial work application. All parts that are subject to wear, breakage or distortion shall be accessible for adjustment, replacement as interchangeable components and repairable.

5.1.3 The mobile vertical lift shall have a direct electric motor. The mobile vertical lift shall be equipped with a battery charging system.

5.1.4 The mobile vertical lift shall be the latest model of the manufacturer's basic commercial product and shall have been in production, marketed, and in use for a minimum of one year preceding the solicitation for procurement.

5.1.5 The mobile vertical lift shall be equipped with standard instruments, components and accessories normally required for the safe and effective operation of the lift. The mobile vertical lift shall be complete with all components that are listed as standard on the contractor's literature for the basic product, whether stipulated herein or not, together with such accessories and options as may be specified herein.

5.1.6 The mobile vertical lift shall have the capability of 20% grade ability.

5.1.7 The mobile vertical lift shall have single joystick drive and steer control capability.

5.1.8 The mobile vertical lift shall be equipped with all other components and parts not specifically mentioned but necessary to provide a functional machine and shall conform, in quality, to that normally provided to the commercial industry. Mobile vertical lift requirements shall be as specified herein.

5.2 Equipment Components and Subsystems-Design Features and Mechanical Construction.

5.2.1 Safety.

The mobile vertical lift shall conform to the OSHA requirement 1910 for General Industry and 1910.68 requirement for man lifts.

5.2.2 Dimensions.

Dimensions and weight shall be:

a. Ground clearance = 2 inches

b. Overall length (Stowed) = 4 feet 6 inches

c. Overall width = 2 feet 6 inches

d. Overall height (Stowed) = 6 feet 6 inches

e. Platform Load capacity = 350 pounds or greater

f. Overall weight = 2,325 pounds

5.2.3 Drive train.

The mobile vertical lift shall be equipped with a 4 brush direct electric drive with reverse.

5.2.4 Enclosures and Shields.

All electrical components including wiring shall be so located or protected by adequate means to prevent contact with or the entrance of water.

5.2.5 Wheels.

The mobile vertical lift shall have steel wheels.

5.2.6 Tires.

a. Rear Drive & Steer Wheels = 12.62 x 4 in.

b. Front Caster Wheels = 8 x 2.5 in. The tires shall be new and unused. Composition shall be Non-Marking.

5.2.7 Controls and Instrumentation.

All controls and instrumentation shall be provided with position markings.

5.2.8 Keys.

Two keys shall be furnished with each mobile vertical lift.

5.2.9 Lights.

The mobile vertical lift shall be equipped with a flashing operation light.

5.2.10 Human Factors Performance Features and Operating Performance Data.

Performance feature shall include:

a. Multifunction display showing this information at a minimum: multifunction hour meters.

b. All words on instruments, control panels, charts, and plates shall be in the English language. Characters shall be permanently marked in boldface on a contrasting background. All plates shall be corrosion resistant.

5.2.11 Performance Criteria.

a. Maximum travel speed (Platform Lowered) = 3.5 mph

b. Maximum travel speed (Platform Elevated) = 0.6 mph

c. Load capacity = 350 pounds or greater

d. Turning radius = Zero

e. Platform Height = 19 ft. 1 in.

f. Platform Size = 28 x 26 in

g. Maximum Drive Height = 19 ft. 6 in

5.3 Equipment Features and Accessories.

a. Safety Interlocked Controls

b. Pistol-Grip Platform Control

c. Single Joystick Drive and Steer Control

d. Variable Speed Elevation Controls

e. Automatic Pothole Protection System

f. 1-1/2 Degree Tilt Alarm

g. Key Lock Main Power Switch

h. Automatic Power-Off Battery Saver Control

i. Battery Discharge Indicators, Platform and Base

j. Transportation Tie Downs

k. Built-In Fork Truck Pockets

l. Lanyard Attachment Anchor

m. Hour meter

n. All Motion Alarm

o. 110 Volt Double Receptacle on Platform

p. Flashing Amber Beacon

q. Horn

r. Oversized Gull-Wing Front Entry Platform (28 x 26 in)

s. Tool Tray (8 in. W x 18 in. L x 5 in. D) 5.3.1 The mobile vertical lift shall be equipped with all standard and optional equipment to enable it to operate normally at full capacity in any ambient temperature from 0°F to +120°F.

6.0 Requirements: JLG Model 2646ES (1). This specification provides the requirements for an electric powered, solid non-marking tired scissor lift. The scissor lift shall include 26 foot minimum platform height (32 foot working height), and 1000 pound capacity platform with lanyard anchorage points, and operating alarm and light. The scissor lift shall be a product produced as the manufacturer's current production model.

6.1 General Requirements.

6.1.1 The scissor lift shall have a platform capacity of 1000 pounds.

6.1.2 The scissor lift shall be suitable for industrial use in an industrial work application. All parts that are subject to wear, breakage or distortion shall be accessible for adjustment, replacement as interchangeable components and repairable.

6.1.3 The scissor lift shall be a 24V electric powered system. The scissor lift shall be zero-emission electric operation. A charging system shall be included. The lift shall come with maintenance-free batteries.

6.1.4 The scissor lift shall be the latest model of the manufacturer's basic commercial product and shall have been in production, marketed, and in use for a minimum of one year preceding the solicitation for procurement.

6.1.5 The scissor lift shall be equipped with standard instruments, components and accessories normally required for the safe and effective operation of the lift. The scissor lift shall be complete with all components that are listed as standard on the contractor's literature for the basic product, whether stipulated herein or not, together with such accessories and options as may be specified herein.

6.1.6 The scissor lift shall have the capability of 32ft minimum working height.

6.1.7 The scissor lift shall be front-wheel drive and have a zero inside turning radius.

6.1.8 The scissor lift shall be equipped with all other components and parts not specifically mentioned but necessary to provide a functional machine and shall conform, in quality, to that normally provided to the commercial industry. Scissor lift requirements shall be as specified herein.

6.2 Equipment Components and Subsystems-Design Features and Mechanical Construction.

6.2.1 Safety.

The scissor lift shall conform to the OSHA requirement 1910 for General Industry and 1910.68, ANSI A92.6, CSA B354.2, CE Compliance, AS 1418.10 requirements for man lifts.

6.2.2 Dimensions.

Dimensions and weight shall be:

a. Wheelbase = 6 ft. 10 in

b. Ground clearance = 3.75 in

c. Overall length = 8 ft. 2.5 in

d. Overall width = 3 ft. 10 in

e. Overall height = 7 ft. 9 in

f. Platform Load capacity = 1000 pounds or greater

g. Overall weight = 4,975 lbs.

h. Guardrail height = 3 ft. 7 in

i. Toe board height = 6 in

j. Gradeability stowed = 25%

k. Raise/Lower speed = 28 sec.

6.2.3 Drive train.

The scissor lift shall be equipped with dual front wheel drive with reverse.

6.2.4 Enclosures and Shields.

All electrical components including wiring shall be so located or protected by adequate means to prevent contact with or the entrance of water.

6.2.5 Wheels.

The scissor lift shall have steel wheels.

6.2.7 Tires.

Tires shall be 16 x 5 in solid non-marking. The tires shall be new and unused. Composition shall be non-marking.

6.2.8 Controls and Instrumentation.

All controls and instrumentation shall be provided with position markings.

6.2.9 Key Switch.

Two keys shall be furnished with each mobile vertical lift.

6.2.10 Lights.

The scissor lift shall be equipped with a flashing LED beacon.

6.2.11 Human Factors Performance Features and Operating Performance Data.

Performance feature shall include:

a. Multifunction display showing this information at a minimum: multifunction hour meters, battery charge indicator and diagnostic display.

b. All words on instruments, control panels, charts, and plates shall be in the English language. Characters shall be permanently marked in boldface on a contrasting background. All plates shall be corrosion resistant.

6.2.12 Performance Criteria.

a. Maximum travel speed (Stowed), = 2.0 mph

b. Maximum travel speed (Raised), = 0.5 mph

c. Load capacity = 1000 pounds or greater

d. Outside turning radius inside= zero

e. Outside turning radius outside= 8 ft.

f. Drive height = Full height 6.3 Equipment Features and Accessories.

a. 89 x 45.3 in steel platform

b. Folding rails with full height swing gate

c. Ability to drive at full height

d. Platform control with battery charge indicator and diagnostic display

e. On-board diagnostic system

f. AC power to platform

g. Lanyard attachment points

h. Manual platform lowering valve

i. Emergency stop at both platform and ground controls

j. Rear wheel multiple disc brakes

k. Front wheel hydraulic dynamic braking

l. Manual hydraulic brake release

m. Swing-out component trays

n. Tilt level sensor with audible alarm

o. Descent and Motion alarm

p. Electronic horn

q. Maintenance-free batteries

r. Proportional controls 6.3.1 The scissor lift shall be equipped with all standard and optional equipment to enable it to operate normally at full capacity in any ambient temperature from 0°F to +120°F.

7.0 Requirements: JLG 450AJ (1). This specification provides the requirements for a four wheeled drive, diesel powered, rubber tired articulating boom lift. The articulating boom lift shall include four wheel drive capability, 45 ft. minimum platform height, and 550 pound capacity platform with lanyard anchorage points, and operating alarm and light. The articulating boom lift shall be a product produced as the manufacturer's current production model.

7.1 General Requirements.

7.1.1 The articulating boom lift shall have a platform capacity of 550 pounds. The platform must be a fall arrest platform.

7.1.2 The articulating boom lift shall be suitable for industrial use in an industrial work application. All parts that are subject to wear, breakage or distortion shall be accessible for adjustment, replacement as interchangeable components and repairable.

7.1.3 The articulating boom lift shall have a tier 4, liquid cooled, 49 horsepower diesel engine powered system. The articulating boom lift shall be equipped with a 12 volt DC battery with alternator charging system and electric starting capability.

7.1.4 The articulating boom lift shall be the latest model of the manufacturer's basic commercial product and shall have been in production, marketed, and in use for a minimum of one year preceding the solicitation for procurement.

7.1.5 The articulating boom lift shall be equipped with standard instruments, components and accessories normally required for the safe and effective operation of the lift. The articulating boom lift shall be complete with all components that are listed as standard on the contractor's literature for the basic product, whether stipulated herein or not, together with such accessories and options as may be specified herein.

7.1.6 The articulating boom lift shall have the capability of 355 degree continuous swing and 145 degree range of vertical jib rotation.

7.1.7 The articulating boom lift shall have two wheel steering capability.

7.1.8 The articulating boom lift shall be equipped with all other components and parts not specifically mentioned but necessary to provide a functional machine and shall conform, in quality, to that normally provided to the commercial industry. Articulating boom lift requirements shall be as specified herein.

7.2 Equipment Components and Subsystems-Design Features and Mechanical Construction.

7.2.1 Safety.

The articulating boom lift shall conform to the OSHA requirement 1910 for General Industry and 1910.68 requirement for man lifts.

7.2.2 Dimensions.

Dimensions and weight shall be:

a. Ground clearance = 1 ft.

b. Overall length (Stowed) = 21 ft. 7 in.

c. Overall width = 7 ft. 9 in.

d. Overall height (Stowed) = 7 ft. 5 in.

e. Platform Load capacity = 550 pounds or greater

f. Overall weight = 12,650 lbs.

7.2.3 Drive train.

The articulating boom lift shall be equipped with a four wheel drive capable drive train with reverse.

7.2.4 Engine The articulating boom lift shall be equipped with a 49 horsepower, liquid cooled, diesel engine powered system. The engine shall have a spin on canister type oil filter and a two stage dry replaceable type air filter. The engine shall have an electric starting capability with an alternator charging system. The engine must have a muffler with US Forest Service approved spark arrestor.

7.2.5 Enclosures and Shields.

All electrical components including wiring shall be so located or protected by adequate means to prevent contact with or the entrance of water.

7.2.6 Wheels.

The articulating boom lift shall have steel wheels.

7.2.7 Tires.

The tires shall be foam filled in new and unused condition. Composition shall be rubber.

7.2.8 Controls and Instrumentation.

All controls and instrumentation shall be provided with position markings.

7.2.9 Key Switch.

An individual key-operated on-off switch shall be furnished. Two keys shall be furnished with each articulating boom lift.

7.2.10 Lights.

The articulating boom lift shall be equipped with a flashing operation light.

7.2.11 Human Factors Performance Features and Operating Performance Data.

Performance feature shall include:

a. Multifunction display showing this information at a minimum: multifunction hour meters, low oil indicator.

b. All words on instruments, control panels, charts, and plates shall be in the English language. Characters shall be permanently marked in boldface on a contrasting background. All plates shall be corrosion resistant.

7.2.12 Performance Criteria.

a. Maximum travel speed (Stowed), = 4.25 mph

b. Load capacity = 550 pounds or greater

c. Outside turning radius =15 ft. 8 in.

d. Inside turning radius = 6 ft. 9 in.

e. Grade ability = 45%

f. Platform Height = 45 ft.

g. Horizontal Outreach = 25 ft.

h. Up and Over Height = 24 ft.

i. Tail swing = 0 in.

7.3 Equipment Features and Accessories.

a. 4 ft. 1 in. Articulating Jib

b. Fall Arrest Platform: 30in. x 60 in.

c. 180 Degree Hydraulic Platform Rotator

d. Platform Console Machine Status Light Panel showing at minimum:

1. System distress

2. Low fuel

3. 5 degree tilt light

4. foot switch status

e. 110V-AC Receptacle in the Platform

f. Swing Out Engine Module

g. Interactive Display at Ground Controls

h. Proportional Controls

i. Lifting/Tie Down Lugs

j. Horn

k. Four-Wheel Hydrostatic Drive

l. Oscillating Axle

m. Motion Alarm

n. Flashing Amber Beacon

o. Light Package

p. Platform Work lights

q. Operator Tool Tray

r. Mounted Fire Extinguisher 7.3.1 The articulating boom lift shall be equipped with all standard and optional equipment to enable it to operate normally at full capacity in any ambient temperature from 0°F to +120°F.

7.3.2 The articulating boom lift shall include necessary components that allow the operator to leave the platform and move freely using a Self-Retracting Lifeline (SRL) without detaching safety harness.

8.0 Acceptance Testing and Verification. The equipment shall be tested and verified after delivery to ANAD.

8.1 Conformance. The Equipment shall meet the requirements of this Specification and conform to the Manufacturer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to, at any time during the contract period, require proof of such conformance or to inspect the Equipment to determine compliance with the requirements of this Specification.

8.2 Preliminary Acceptance. The Government will provide a preliminary acceptance of the date of delivery of the Equipment to ANAD. This preliminary acceptance requires that all the all Equipment components, accessories and documentation are delivered to ANAD and have been inspected for shipping damage by the Government.

8.3 Final Acceptance. The Government will issue a final acceptance only after the contractor successfully completes all requirements herein. Final acceptance will be at Anniston Army Depot. Upon acceptance of all items described above, the contractor shall submit a completed DD Form 250 for signature by the government representative, as final acceptance of the equipment required by this specification.

9.0 Delivery, Handling, Storage and Installation.

9.1 Delivery.

9.1.1 The Contractor shall be responsible for delivering the Equipment to Building 55 at Anniston Army Depot, 7 Frankford Avenue, Anniston, Alabama, 36201.

9.1.2 The government will provide the Contractor a required delivery date a minimum of 8 weeks prior to that delivery date. The Contractor must deliver the equipment within 5 business days of the delivery date provided by the Government. The required delivery date shall be no later than 30 Sept. 2018. Partial delivery and payment can be authorized by the Contracting Officer.

9.2 Shipping.

9.2.1 The Contractor shall be responsible for crating and shipping the Equipment and all associated material and components.

9.2.2 The crating shall protect the Equipment from damage and weather during handling, shipping and storage of the Equipment.

9.2.3 The Contractor shall provide shipping details to the Government no less than one (1) week prior to shipment.

9.3 Installation.

9.3.1 The Contractor shall be responsible for identifying all components and functionality described in the Specification to the Contract Officer.

10.0 Diagnostic Software. The offeror’s equipment must have a built-in self-test (BIST) system incorporated into the equipment if the option is available. A built-in self-test (BIST) system as defined for this requirement shall be a system that is capable of performing diagnostic tests and displaying the trouble codes on a LCD screen on the equipment. Operator and maintenance personnel should be able to access any diagnostic codes without the use of an external reader or computer. The system shall not require the use of internet connection or software subscriptions in order to function. Contractor shall supply a list of trouble codes with their associated meaning(s) and recommended troubleshooting test procedures. Contractor shall provide training for the use of the built-in self-test (BIST) system.

11.0 Documentation and Delivery. The Contractor shall provide documentation with each piece of Equipment as specified herein and on the attached DD Form 1423. The documentation shall be delivered with the Equipment or as required herein.

11.1 Quantity. The Contractor shall provide two (2) printed copies and one (1) electronic copies of all documentation to include all maintenance and operators manuals.

11.2 Electronic File Format. Electronic copies of the documentation shall be in Adobe Portable Document Format (PDF). Drawings and schematics may be provided in PDF or Microstation (.dgn) format.

11.3 Operator Manuals. An Operator Manual shall be furnished to include operating instructions explaining preventive maintenance procedures, methods of checking the Equipment for normal safe operation and procedures for safely starting and stopping the system manually. The Operator Manual shall include the step-by-step procedures required for Equipment startup, operation and shutdown.

11.4 Maintenance Manuals. Maintenance manuals shall include electrical, hydraulic, and pneumatic schematics, as applicable, detailed lockout/tag out procedures, parts lists, troubleshooting procedures, preventive maintenance requirements, lubrication schedule and any other maintenance procedures normally provided by the Contractor. Schematics shall show and identify all parts. Schematic diagrams showing equipment utilized, including motor horsepower and voltage; starter; isolators; manual bypasses; tubing sizes; drain piping and drain traps; reducing valves; and data on manufacturer's names and model numbers, mounting, access, and clearance requirements. Data shall include calculations of all utility consumption.

11.5 Spare Parts List. Spare Parts Lists shall be furnished complete with OEM part numbers, National Stock Numbers (if applicable), part descriptions, and required quantities.

11.6 Other Documentation. In addition, any other documentation normally furnished with the Equipment shall be provided.

11.7 Language. All documentation shall be furnished in the English language only.

11.8 Training. A factory representative shall provide operator (approx... 10) and maintenance personnel (approx... 5) with training NLT 2 weeks after delivery. Training must be at least 8hrs in duration. All training requirements must be met prior to final acceptance by the government.

11.9 Government Furnished Equipment (GFE). ANAD will furnish no Government equipment to the Contractor.

12.0 Warranty. The Equipment shall be covered by a warranty. The warranty shall be for a period of not less 12 months or 2,000 hours, whichever comes first. The warranty shall begin on the date of delivery. Warranty shall be in the name of Anniston Army Depot.

PAGE

PAGE