(1)_SOW_FY19_Bore_Sight_Base_Plus_4_yrs..pdf

Statement of Work for Bore Sight Telescope Repairs I. This specification establishes a requirement for a base year plus four option years of the calibration and repair of two each bore sight telescopes.

1. These bore sight telescopes were manufactured by Warren-Knight Instrument Company (OEM) and used in the bore sight alignment process in Bldg. 501 for the M109 Paladin and M198 weapon systems.

2. The vendor shall repair the telescopes to “like-new” condition (or better) when bore sights are used within normal duty/life cycles (i.e. no catastrophic failures or incidents).

3. The telescope shall be capable of correctly and accurately performing the boresight alignment procedure according to the OEM specifications.

4. The telescopes shall carry a one (1) year warranty on parts and labor covered by the vendor beginning after delivery to Anniston Army Depot.

5. This scope of work shall be limited to two count telescopes (see information below) and not to exceed a delivery time of four (4) weeks.

Telescope #1 Serial Number: 127752 Part Number: 8015873

Telescope #2 Serial Number: 8083 Part Number: 8015873

6. Telescope #2 bore sight telescope shall be calibrated first followed by Telescope #1 six months as to not overlap in calibration to maintain mission and audit readiness.

7. Contractor shall be responsible for return shipment of Bore Sight Telescopes to Anniston Army

Depot as follows:

Anniston Army Depot 7 Frankford Avenue Bldg 140, Jerry Corby Anniston, AL 36201

II. Contract shall be responsible for Contractor Manpower Reporting (CMR)

The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the contractor will report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor is required to completely fill in all the information in the format using the following web address: https://www.ecmra.mil/Default.aspx. The required information includes:

(1) Contracting Office, Contracting Officer, Contracting Officer's Technical Representative;

https://www.ecmra.mil/Default.aspx

2) Contract number, including task and delivery order number;

(3) Beginning and ending dates covered by reporting period;

(4) Contractor name, address, phone number, e-mail address, identity of contractor employee entering data;

(5) Estimated direct labor hours (including sub-contractors);

(6) Estimated direct labor dollars paid this reporting period (including sub- contractors);

(7) Total payments (including sub-contractors);

(8) Predominant Federal Service Code (FSC) reflecting services provided by contractor (and separate predominant FSC for each sub-contractor if different);

(9) Estimated data collection cost;

III. Scope Changes.

The Contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.