W911KF19Q0036_Released.pdf

SEE ADDENDUM

(No Collect Calls)

W911KF19Q0036 26-Feb-2019

b. TELEPHONE NUMBER

256 235-6231

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 12 Mar 2019

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W911KF9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

AMBER E. BURDETT

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

W31G1Y903001ME

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DOC-ANNISTON ARMY DEPOT(2)

DIRECTORATE OF CONTRACTING

7 FRANKFORD AVENUE

ANNISTON AL 36201-4199

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W31G1Y 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

ANNISTON ARMY DEPOT

SEE SCHEDULE

ANNISTON AL

TEL: FAX:

256-235-6353FAX:

TEL: 256-235-6231 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

333924

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF61

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W911KF19Q0036

Section SF 1449 - CONTINUATION SHEET

NARRRATIVE

NARRATIVE 1 – The following is incorporated into this solicitation as an attachment:

(1) DD Form 1423

NARRATIVE 2 - Item quoted must meet standards of the suggested equipment listed in the Statement of Work. Technical evaluations will be performed. Contractor to show how your proposal meets each and every salient feature listed within the statement of work. The statement of work is located on page 8.

NARRATIVE 3 - IMPORTANT INFORMATION REGARDING YOUR PROPOSAL: IT IS

YOUR RESPONSIBILITY TO ENSURE YOUR BID HAS BEEN RECEIVED BY THE

CLOSING DATE AND TIME AS SPECIFIED IN THE SOLICITATION: All offerors, email Amber Burdett at amber.e.burdett.civ@mail.mil as soon as your bid has been submitted in order to verify it’s receipt. This will be your only guarantee that your bid will be considered for this contract. If an email is received without a corresponding bid, then the contractor will be requested to resubmit the bid.

NARRATIVE 4 - Quote must be submitted on Standard Form 1449. YOUR BID WILL BE

CONSIDERED TO BE NON-RESPONSIVE IF THE SF FORM 1449 IS NOT SUBMITTED

IN ITS ENTIRETY. Quoters that fail to furnish required representations or information, or whom reject the terms and conditions of the request may be determined to be

NONRESPONSIVE.

It is your responsibility to furnish all information requested. We will not confirm information by telephone. If you do not fully respond (such as price, delivery date) to the Request for Quotation, you may be determined NON-RESPONSIVE.

NARRATIVE 5 - Contractor must complete the delivery schedule located within Local Narrative, Time of Delivery located on page 7.

NARRATIVE 6 - Contractor must accept Government Smart Pay Visa Credit Card or provide their electronic funds transfer address. Contractors must be registered in the System for Award Management (SAM) database before an award will be issued. Companies should verify their SAM registration to ensure it is valid and current. COMPLETE THE FOLLOWING

INFORMATION AND INCLUDE WITH ANY OFFER.

Accept VISA? Yes_____ No_____ If no, EFT address: ________________________

Federal Tax Identification Number: __________________ Dun & Bradstreet Number (DUNS):__________________ CAGE Code: _____________ System for Award Management (SAM) Registration: Yes______ No_______ Expiration Date:__________ Vendor Contact Information: POC____________________________

Telephone:_______________________

FAX: ___________________________

Email:___________________________

NARRATIVE 7 - WAWF PROCEDURES If your order WILL BE PAID BY DFAS (not by credit card) and contains DFARS Clause 252.232-7003, Electronic Submission of Payment Requests, you must submit your invoice through Wide Area Workflow (WAWF). This clause requires invoices for supplies and services purchased by the DoD be submitted via electronic means. The Wide Area Workflow system satisfies this mandatory requirement. WAWF can be accessed on the internet at https://wawf.eb.mil/ Ensure the Electronic Business POCs listed in the System for Award Management (SAM) for your company are the same individuals that will submit invoices through WAWF before using WAWF. The previous ‘Central Contractor Registration (CCR)’ system has been migrated to the System for Award Management (SAM) and accessible at www.sam.gov. For SAM access and navigation issues, follow the instruction provided at “User Guides and Helpful Hints” on SAM Home page.

If your Electronic Business (EB) POCs are correct, contact the WAWF helpdesk at 1-866-618- 5988 or by e-mail at cscassig@ogden.disa.mil and ask them to establish a group for your CAGE code. The group administrator will also have to call the WAWF helpdesk to request account activation. Once the group is established and the account is activated, you will be able to create a Combination Invoice/Receiving report (SUPPLIES/MATERIALS) or a 2 in 1 Invoice (SERVICES/EQUIPMENT) using the codes below and instructions available from our contract administrator/buyer.

Questions concerning payment should be directed to the responsible Defense Finance Accounting Services (DFAS). Please have the order number and invoice number ready when calling about payment status.

The accounts payable mailing address can be located in Block 18a of your order. You can easily access payment information using the DFAS web site at http://www.dfas.mil/http://www.dfas.mil. Your purchase order/contract number or invoice will be required to inquire status of your payment. Go to DFAS on the web at:

www/dfas.mil/money/vendor.

THE FOLLOWING CODES WILL BE REQUIRED TO ROUTE YOUR INVOICES AND

ADDITIONAL EMAILS CORRECTLY THROUGH WAWF:

WAWF

Data/CODES needed for Invoice

SUPPLIES/

MATERIAL

S (PRs that start with W31G1Y)

SERVICES/

EQUIPMEN

T

SUPPLIES/

MATERIALS

(PRs DO NOT that start with W31G1Y)

CONSTRUCTION

CAGE CODE SAM Cage code listed in Contractor/Of feror field of contract

SAM Cage code listed in Contractor/Of feror field of contract

SAM Cage code listed in Contractor/Off eror field of contract

SAM Cage code listed in Contractor/Offeror field of contract

ISSUE/ADMIN

BY DODAAC

W911KF W911KF W911KF W911KF

INSPECT BY

DODAAC (If needed)

W31G1Y (Must have inspector code)

W911KF W911KF

(Unless Inspected by

DCMA)

W911KF

SHIP TO

(Supplies/Material s Only)

W911KF NOT

AVAILABL

E

W911KF W911KF

ACCEPTOR

(Services/Equipme nt Only)

NOT

AVAILABL

E

W911KF NOT

AVAILABLE

NOT AVAILABLE

Type of Invoice COMBO 2 IN 1 COMBO CONSTRUCTION

Pay DODAAC HQ0303 HQ0303 HQ0303 HQ0303

CONTRACT NUMBER: At time of award

DELIVERY ORDER NUMBER (IF APPLICABLE):

EMAIL POINT OF CONTACT LISTING: (Please insert following email addresses for additional email distribution) CONTRACT ADMINISTRATOR: amber.e.burdett.civ@mail.mil CONTRACTING OFFICER: heather.n.glover2.civ@mail.mil USER AND/OR INSPECTOR:

ADDITIONAL CONTACTS:

NARRATIVE 8 – LOCAL NARRATIVES

DISCLOSURE OF UNIT PRICE INFORMATION

This constitutes notification pursuant to Executive Order 12600, Pre-Disclosure Notification Procedures for Confidential Commercial Information (June 23, 1987), of our intention to release unit prices in response to any request under the Freedom of Information Act, 5 USC 552. Unit price is defined as the contract price per unit or item purchased. We consider any objection to be waived unless the contracting officer is notified of your objection to such posting prior to submission of initial proposals.

INSTALLATION SECURITY

No unauthorized materials of any type may be brought onto or left unattended on the installation.

Contractors must have a process in place to receive and store materials and have visibility of the location of those materials at all times while on ANAD. This includes construction materials, equipment, and miscellaneous items. This visibility/accountability of materials applies to the Contractor, its subcontractors, and its material suppliers. Further, all Contractor, subcontractor, and material supplier employees are prohibited from bringing personal belongings of any nature onto the installation if such items are to be left unattended at any time. The Contractor is further required to have a plan of action for implementing these procedures and must submit it to the Contracting Officer upon request. This plan of action must include a provision for informing all employees and subcontractors of these procedures. The plan of action must also address monitoring and procedures the Contractor has in place to ensure compliance with this contractual provision. Should the Contractor fail to comply with this mandatory contractual provision, the Contractor may be held responsible for all direct and indirect cost incurred by the Government in identifying, securing, segregating, removing, and otherwise properly disposing of improper or abandoned materials/equipment.

AMC-LEVEL PROTEST PROGRAM

If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the General Accounting Office or other external forum.

Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. Complete AMC Protest Procedures can be found at:

http://www.amc.army.mil/amc/commandcounsel.html An agency protest may be filed with either the contracting officer or to HQAMC but not both following the procedures listed on the website above.

RECEIVING HOURS

a. Receiving hours for deliveries to the Receiving Area (see paragraph b):

DAYS PER WEEK HOURS

7:00 a.m. - 12:00 p.m.

Monday – Friday and

12:40 p.m. - 2:00 p.m.

b. Normal Depot working hours are as follows:

DAYS PER WEEK HOURS

7:00 a.m. - 12:00 p.m.

Monday – Thursday and

12:30 p.m. - 4:30 p.m.

7:00 a.m. - 12:00 p.m.

Every Other Friday and 12:30 p.m. - 3:30 p.m.

c. Anniston Army Depot will be closed Saturdays, Sundays, Federal Holidays, and every other Friday.

d. Details of this order/contract should not be discussed with anyone other than the Contract Administrator whose name and telephone number are shown in the ADMINISTERED BY block of the order/contract. Should you receive any inquiry(ies) from any source other than as indicated above, we would appreciate you contacting us in writing or by telephoning the appropriate administrator at Anniston Army Depot.

e. If the purchase/contract/delivery order number is not noted on the shipping document or marked clearly on the box/package, it will be REJECTED.

FOREIGN SUPPLIES

This contract is subject to the Buy American Act (41 U.S.C. 10a-d) and implements Parts 25 of the FAR and DFARS and any restrictions in appropriation acts on the procurement of foreign supplies. The quotation must identify any foreign items to be furnished.

COMMERCIAL WARRANTY

The Contractor agrees that the supplies or services furnished under this contract shall be covered by the most favorable commercial warranties the Contractor gives to any customer for such supplies or services and that the rights and remedies provided herein are in addition to and do not limit any rights afforded to the Government by any other clause of this contract.

TIME OF DELIVERY (OCT 1993)

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

WITHIN CALENDAR DAYS

ITEM NO. QUANTITY AFTER RECEIPT OF AWARD

0001 ONE (1) EACH NINETY (90)

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule.

If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

WITHIN CALENDAR DAYS

ITEM NO. QUANTITY AFTER RECEIPT OF AWARD

0001 ONE (1) EACH ______________

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding one working day if the award is transmitted electronically. The term “working day” excludes weekends and U. S. Federal holidays.)

ELECTRONIC SUBMISSION OF OFFERS

All responses to this solicitation must be submitted in digitized/electronic format. Paper copy responses will not be accepted. All solicitation responses must be submitted through the Federal Business Opportunities (FedBizOpps) Website, fbo.gov.

FedBizOpps provides industry with a single point of access to all U.S. Army contracting opportunities. The Contracting Opportunities Search feature allows vendors to easily locate opportunities and submit offers/bids online.

Vendors must be registered before being able to respond to a solicitation. Before registering, a Data Universal Numbering System (DUNS) Number is required and registration in the SAMS System (www.sam.gov) is required. Registration is completed by choosing the Register Now option on the fbo.gov webpage and following the steps.

If a format is other than Microsoft Word, Microsoft Excel, Microsoft Access, Microsoft PowerPoint, or Portable Document Format (PDF), a "reader" must be provided. Offeror must insure its offer, in its entirety, reaches the Army Contracting Command-Warren, Anniston Army Depot (ANAD), before the time set for opening or closing of the solicitation.

Any clauses or provisions of this solicitation which mention writing, returning, or submission of offer will mean electronic submission as stated in the paragraph above.

Electronic offers must identify the solicitation and the opening/closing date, and include, as a minimum, the following:

a. The SF33/SF1449/SF18/SF1442 filled out and signed.

b. All applicable fill-in provisions from the solicitation must be completed.

c. Any other information required by the solicitation.

Lateness rules are outlined in the solicitation.

If you choose to password-protect access to your offer, you must provide the password to ANAD before the opening or closing date. Contact the buyer identified on the cover page of this solicitation to arrange a means of providing the password. Passwords used only for the purpose of write protecting files need not be provided.

Offerors shall make every effort to ensure that their offer is virus-free. Offers (or portions thereof) submitted which DO reflect the presence of a virus, or which are otherwise rendered unreadable by damage in either physical or electronic transit, shall be treated as “unreadable.”

See Federal Acquisition Regulation 14.406 or 15.207(c) for a description of the steps the Government shall take with regard to unreadable offers.

Any bid bond required by this solicitation must be submitted with offer. Also, the properly completed original bid bond must be furnished to the Army Contracting Command-Warren, Anniston Army Depot (ANAD), 7 Frankford Ave, Anniston, AL 36201-4199, prior to the opening or closing of the solicitation.

STATEMENT OF WORK

DESCRIPTION/WORK STATEMENT/SPECIFICATION

Compact Track Loader

1.0 Scope. This specification establishes the requirement for two (2) Compact Track Loaders with a minimum operating weight of 11,000 lb. The Compact Track Loader shall be developed by the Contractor with all functionality, capabilities and features as described herein.

The Contractor shall provide all resources necessary to meet the specifications, manufacture, deliver, and demonstrate functional operation of the Equipment.

2.0 Order of Precedence. In the event of a conflict between the text of this Equipment specification and the references cited herein, the more stringent regulation or specification shall take precedence, unless a specific exception to this, order of precedence, is noted in this Equipment specification. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained by the Government.

3.0 Requirements. This specification provides the requirements for two (2) Compact Track Loaders (from hereon know as loaders). The Loaders shall be a product produced as the manufacturer's current production model.

3.1 General Requirements.

a. ROPS Enclosed Cab with air conditioner and heater.

b. Air suspension seat with 2” seat belt

c. Windshield Wiper

d. Windshield Washer

e. Rubber Tracks

f. Land Management of Forestry type package

g. Variable Speed Cooling Fan with auto reverse function.

h. Cab Lighting

i. 78” bucket with bolt on cutting edge

3.2 Equipment Components and Subsystems-Design Features and Mechanical

Construction.

3.2.1 Hydraulic System.

a. Auxiliary high-pressure hydraulics and control circuits shall be available for attachments, allowing for operation of high pressure work tools.

b. Maximum Loader Hydraulic Pressure 4,061 psi

c. Maximum Loader Hydraulic Flow 40 gal/min

d. Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release

3.2.2 Attachments.

a. 78” bucket with bolt on cutting edge

b. Universal powered Quick coupler plate that can be locked and unlocked from the operator’s station.

3.2.3 Drive.

a. Hydrostatic Transmission, Two Speed Travel

3.2.4 Engine. Engine shall be a Diesel with no less than 100-110 Net engine HP

The engine shall also provide the following:

a. US EPA Tier IV final emission approved engine

b. water-cooled, direct injection diesel with minimum 232 cubic inch displacement

c. fuel filtration system with water separator and indicator

d. Spin-on engine oil filter

e. 12-Volt electrical system

f. Minimum 100-amp alternator

g. Maintenance free battery

3.2.5 Undercarriage

a. Tie down points

3.2.6 Human Factors Performance Features and Operating Performance Data.

Performance feature shall include:

a. Multifunction display showing this information at a minimum: multifunction hour meters, low oil indicator, parking brake indicator, fuel level indicator, DEF level indicator.

b. All words on instruments, control panels, charts, and plates shall be in the English language. Characters shall be permanently marked in boldface on a contrasting background. All plates shall be corrosion resistant. All controls and instrumentation shall be provided with position markings.

3.2.7 Operator Environment

a. ROPS Enclosed Cab provides a maximum operator sound exposure of 83 dB(A) with doors and windows closed

b. High back seat with air suspension, fully adjustable seat shall have reclining back, upper and lower seat slide adjustments, height and tilt adjustments, adjustable armrests, and a retractable seat belt.

c. Joystick controls.

d. LCD Gauge cluster screen.

e. Interior Rearview Mirror.

3.2.8 Ignition Key Start/Stop Switch. An individual on-off switch shall be furnished. Two keys shall be furnished if keys are required.

3.2.9 Lights and Alarms. The Loader shall be equipped with a flashing LED operation light and auditable back-up alarm. All lighting including headlights, tail/brake lights, and work lights should be LED if available.

3.3 Safety, Ergonomic and Environmental Compliance.

3.3.1 Safety.

a. Signaling/Warning horn

b. Safety Hammer for cab evacuation

3.3.2 Ergonomics.

The Equipment shall be ergonomically designed to prevent the occurrence of repetitive stress injuries.

3.3.3 Environmental Compliance.

The Equipment provided under this contract shall meet all applicable Environmental Protection Agency (EPA) and Alabama Department of Environmental Management (ADEM) regulations and restrictions in effect on the date of the contract.

4.0 Maintainability and Interchangeability.

The Equipment shall be constructed using commercial off-the-shelf components to the maximum extent possible to ensure the prompt availability of repair parts. All replaceable parts shall be designed and manufactured to such standards as shall permit replacement and adjustment without the need for modification of the parts or the Equipment. All replacement parts shall be available domestically.

5.0 Workmanship.

Standards of workmanship shall assure that the Equipment shall have the stability, strength, safety, and efficient operating characteristics found in state-of-the-market commercial units.

5.1 Construction.

a. The Equipment shall be so constructed as to be capable of performing the operations specified herein. All surfaces shall be clean and free of extraneous materials. External surfaces shall be smooth and free from sharp edges, rounded or beveled, unless sharpness is required for performance. All screws, pins, and similar parts shall be installed to prevent loss of tightness. Parts subject to adjustment or removal shall not be permanently installed or deformed. The Equipment shall be constructed of parts, which are new, without defects, and free of repairs. The structures shall withstand all forces encountered during operation of the Equipment to its maximum rating and capacity without permanent distortion or failure.

b. Materials shall conform to the applicable specifications and shall be as specified herein and on the manufacturer's applicable drawings. Materials which are not covered by applicable specifications or standards shall be of the best quality, and entirely suitable for the purpose intended.

c. The Equipment shall be constructed of corrosion resistant material to the maximum extent possible. Equipment materials not specifically designated herein or in the contract shall be of a quality commensurate with commercial practice within the applicable machine industry. When dissimilar metals are used in contact with each other, suitable protection against galvanic corrosion shall be applied.

d. Unless suitably protected against electrolytic corrosion, dissimilar metals shall not be used in intimate contact with each other.

e. Materials that are nutrients for fungi shall not be used.

f. Any nonmetallic material that is adversely affected by contact with Equipment compounds shall not be used.

5.2 Lubrication.

a. Lubrication means shall be provided for all moving parts that require lubrication, except where sealed permanent lubrication is provided. The types of lubricants shall be selected from, and in accordance with, SAE J754. All initial fills of lubricants shall be limited to the types approved by the component manufacturers. Grease lube fittings shall conform to SAE J534.

b. A lubrication plate or plates shall be attached to the Equipment. The information provided on the plate shall include: points of lubricant application, servicing interval, type of lubricant(s) with SAE number or lubricant identifier, viscosity, and Federal or Military Specification Number (if applicable).

c. Oil holes, grease fittings, and filler caps shall be accessible. Lubrication reservoirs, if applicable, shall have means for checking levels. Re-circulating lubrication systems shall include a cleanable or replaceable filter.

5.3 Castings and Forgings.

Castings shall be free of visible blowholes, porosity, hard spots, shrinkage, defects, cracks, scale, mismatching or other defects. Forgings shall be free of visible scale, inclusions, cold shuts, mismatching, or other defects. Mechanical and chemical properties of the castings and forgings shall be adequate to meet the performance requirements of this specification. No processes such as welding, peening, plugging, or filling with solder or paste shall be used for reclaiming any defective part. Such processes may be used only for enhancing surface finish and appearance.

5.4 Welding, Brazing, and Soldering.

Welding, brazing, and soldering shall be of a quality, which shall sustain the performance requirements of the welded, brazed, or soldered part. These operations, however, shall not be employed as repair measures for defective parts. Welding, brazing, or soldering shall be employed only where specified in the original design. Any material used for such operations shall be thoroughly removed from the part(s) upon completion of the operations.

5.5 Painting.

Unless otherwise specified painting and finishing of the Equipment shall be in accordance with standard commercial practice provided the following minimum criteria are met or exceeded: all surfaces to be painted shall have been cleaned to be free of all foreign matter detrimental to painting, and at least one coat of industrial primer and one coat of industrial enamel, or equivalent, applied.

6.0 Diagnostic Software.

ANAD currently has Cat ET diagnostic software. Equipment provided thru this contract shall be compatible with the current diagnostic software that ANAD is using or the offeror’s equipment must have a built-in analyzer and self-diagnostic function incorporated into the equipment.

Contractor shall provide training for the use of the self-diagnostic function.

7.0 Conformance. The Equipment shall meet the requirements of this Specification and conform to the Manufacturer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to, at any time during the contract period, require proof of such conformance or to inspect the Equipment to determine compliance with the requirements of this Specification.

8.0 Final Acceptance. The Government will issue a final acceptance only after the contractor successfully completes all requirements herein. Final acceptance will be at Anniston Army Depot.

9.0 Delivery, Handling, Storage and Installation.

9.1 Delivery.

a. The Contractor shall be responsible for delivering the Equipment to Building 4, Anniston Army Depot, 7 Frankford Avenue, Anniston, Alabama, 36201.

b. The Government will provide the Contractor a required delivery date a minimum of 8 weeks prior to that delivery date. The Contractor must deliver the equipment within 5 business days of the delivery date provided by the Government.

9.2 Shipping.

a. The Contractor shall be responsible for crating and shipping the Equipment and all associated material and components.

b. The crating shall protect the Equipment from damage and weather during handling, shipping and storage of the Equipment.

c. The Contractor shall provide shipping details to the Government no less than one (1) week prior to shipment.

10.0 Government Furnished Equipment (GFE). ANAD will furnish no Government equipment to the Contractor.

11.0 Documentation.

11.1 Manuals.

A. (2) Sets of CD-ROM and (2) Sets of printed Operator's Manual, Parts Manual, and Service Manual

The Operator Manual shall include the step-by-step procedures required for Equipment startup, normal safe operation and shutdown. Shop service/technical repair and parts manuals are also to be included for this equipment. All manuals are to be provided at time of delivery and be in the English language.

11.1.1 Other Documentation. In addition, any other documentation normally furnished with the Equipment shall be provided.

11.2 Language. All documentation shall be furnished in the English language only.

11.3 Warranty. The Loader shall be covered by the manufacturer’s standard commercial warranty for this type of equipment and shall begin the day following Government issuance of final acceptance of the Equipment per paragraph 8.0. During the warranty period, the Contractor shall be responsible for all costs including parts and labor required to complete repairs of any defects in machine material, parts or workmanship. The warranty shall be written in the Anniston Army Depot’s name.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 2 Each Compact Track Loaders

FFP

Contractor shall provide two (2) Compact Truck Loaders (part number CAT- 299D2-XHP-CTL or equal ) with a minimum operating weight of 11,000 lb in accordance with the attached Statement of Work.

FOB: Destination

MILSTRIP: W31G1Y903001ME

PURCHASE REQUEST NUMBER: W31G1Y903001ME

PSC CD: 3805

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30-APR-2018 2 ANNISTON ARMY DEPOT

SEE SCHEDULE

ANNISTON AL

FOB: Destination

W31G1Y

CLAUSES INCORPORATED BY REFERENCE

52.203-18 Prohibition on Contracting With Entities That Require Certain Internal Confidentiality Agreements or Statements-- Representation

JAN 2017

52.204-7 System for Award Management OCT 2018 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

OCT 2018

52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-19 Incorporation by Reference of Representations and Certifications.

DEC 2014

52.204-22 Alternative Line Item Proposal JAN 2017 52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for Debarment

OCT 2015

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.211-6 Brand Name or Equal AUG 1999 52.219-4 Notice of Price Evaluation Preference for HUBZone Small

Business Concerns

OCT 2014

52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2018 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-36 Equal Opportunity for Workers with Disabilities JUL 2014 52.222-50 Combating Trafficking in Persons MAR 2015 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.232-33 Payment by Electronic Funds Transfer--System for Award Management

OCT 2018

52.232-36 Payment by Third Party MAY 2014 52.233-1 Disputes MAY 2014 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7005 Representation Relating to Compensation of Former DoD Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.225-7012 Preference For Certain Domestic Commodities DEC 2017 252.227-7015 Technical Data--Commercial Items FEB 2014 252.227-7037 Validation of Restrictive Markings on Technical Data SEP 2016 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.247-7023 Alt III Transportation of Supplies by Sea (May 2002) Alternate III

(May 2002)

JUN 2002

CLAUSES INCORPORATED BY FULL TEXT

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR

STATEMENTS (JAN 2017)

(a) Definitions. As used in this clause-- Internal confidentiality agreement or statement means a confidentiality agreement or any other written statement that the contractor requires any of its employees or subcontractors to sign regarding nondisclosure of contractor information, except that it does not include confidentiality agreements arising out of civil litigation or confidentiality agreements that contractor employees or subcontractors sign at the behest of a Federal agency.

Subcontract means any contract as defined in subpart 2.1 entered into by a subcontractor to furnish supplies or services for performance of a prime contract or a subcontract. It includes but is not limited to purchase orders, and changes and modifications to purchase orders.

Subcontractor means any supplier, distributor, vendor, or firm (including a consultant) that furnishes supplies or services to or for a prime contractor or another subcontractor.

(b) The Contractor shall not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).

(c) The Contractor shall notify current employees and subcontractors that prohibitions and restrictions of any preexisting internal confidentiality agreements or statements covered by this clause, to the extent that such prohibitions and restrictions are inconsistent with the prohibitions of this clause, are no longer in effect.

(d) The prohibition in paragraph (b) of this clause does not contravene requirements applicable to Standard Form 312 (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(e) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015, (Pub. L. 113-235), and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions) use of funds appropriated (or otherwise made available) is prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause.

(f) The Contractor shall include the substance of this clause, including this paragraph (f), in subcontracts under such contracts.

(End of clause)

52.204-1 APPROVAL OF CONTRACT (DEC 1989)

This contract is subject to the written approval of Heather N. Glover and shall not be binding until so approved.

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016)

(a) Definitions. As used in this clause--

Covered contractor information system means an information system that is owned or operated by a contractor that processes, stores, or transmits Federal contract information.

Federal contract information means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public Web sites) or simple transactional information, such as necessary to process payments.

Information means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including textual, numerical, graphic, cartographic, narrative, or audiovisual (Committee on National Security Systems Instruction (CNSSI) 4009).

Information system means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information (44 U.S.C. 3502).

Safeguarding means measures or controls that are prescribed to protect information systems.

(b) Safeguarding requirements and procedures.

(1) The Contractor shall apply the following basic safeguarding requirements and procedures to protect covered contractor information systems. Requirements and procedures for basic safeguarding of covered contractor information systems shall include, at a minimum, the following security controls:

(i) Limit information system access to authorized users, processes acting on behalf of authorized users, or devices (including other information systems).

(ii) Limit information system access to the types of transactions and functions that authorized users are permitted to execute.

(iii) Verify and control/limit connections to and use of external information systems.

(iv) Control information posted or processed on publicly accessible information systems.

(v) Identify information system users, processes acting on behalf of users, or devices.

(vi) Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational information systems.

(vii) Sanitize or destroy information system media containing Federal Contract Information before disposal or release for reuse.

(viii) Limit physical access to organizational information systems, equipment, and the respective operating environments to authorized individuals.

(ix) Escort visitors and monitor visitor activity; maintain audit logs of physical access; and control and manage physical access devices.

(x) Monitor, control, and protect organizational communications (i.e., information transmitted or received by organizational information systems) at the external boundaries and key internal boundaries of the information systems.

(xi) Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.

(xii) Identify, report, and correct information and information system flaws in a timely manner.

(xiii) Provide protection from malicious code at appropriate locations within organizational information systems.

(xiv) Update malicious code protection mechanisms when new releases are available.

(xv) Perform periodic scans of the information system and real-time scans of files from external sources as files are downloaded, opened, or executed.

(2) Other requirements. This clause does not relieve the Contractor of any other specific safeguarding requirements specified by Federal agencies and departments relating to covered contractor information systems generally or other Federal safeguarding requirements for controlled unclassified information (CUI) as established by Executive Order 13556.

(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts under this contract (including subcontracts for the acquisition of commercial items, other than commercially available off-the-shelf items), in which the subcontractor may have Federal contract information residing in or transiting through its information system.

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES (JUL 2018)

(a) Definitions. As used in this clause--

Covered article means any hardware, software, or service that--

(1) Is developed or provided by a covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a covered entity.

Covered entity means--

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L.

115-91) prohibits Government use of any covered article. The Contractor is prohibited from--

(1) Providing any covered article that the Government will use on or after October 1, 2018; and

(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement.

(1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:

(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable; supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial items.

ADDENDUM TO FAR 52.212-1

INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS

52.212-1 (b) (1) THROUGH (11) IS CHANGED TO READ AS FOLLOWS:

1. Complete and return (electronically) one entire copy of solicitation package.

2. Submit Firm Fixed Prices in Schedule of Supplies/Services.

3. Review required delivery schedules in clauses entitled “Time of Delivery” and consider giving expedited delivery schedule.

4. Complete all Representations and Certifications in clauses 52.212-3 entitled “Offeror Representations and Certifications—Commercial Items” or ensure the Representations and Certifications are completed in on-line Representations and Certifications Applications. http://www.sam.gov

5. Provide evidence of signer’s authority to bind the company as stated in paragraph entitled “Signature Authority.”

6. Telegraphic and telephonic offers are not authorized. See clause entitled “Electronic Submission of Offers” for submission instructions.

7. Acknowledge all, if any, amendments issued against this solicitation. Acknowledgement of amendments issued prior to quotation closing date must be received in the Directorate of Contracting prior to quotation closing date and time. Acknowledgement of amendments will not be acceptable by telephone or telegraph. Offeror shall use procedures at clause entitled Electronics Submission of Offers for submission of any acknowledgement of an amendment.

8. Provide technical literature as described in clause entitled “Technical Literature.” As part of the package please submit the following:

(a) The vendor shall state at time of quotation either "EXCEPTION" or "NO EXCEPTION" to each and every paragraph of the SPECIFICATIONS AND SCOPE OF WORK. Where exception is taken, the degree of noncompliance shall be fully explained. The bid shall clearly indicate any exceptions to, or alternatives to, every part of this specification. Bids shall be arranged similar to this specification and shall reference paragraph numbers for ease of analysis and discussion, if the Government determines discussion to be necessary.

(b) Proposals shall include catalogue pictures, drawings, literature, specifications, installation data and additional information, as applicable, to completely describe the system and its controls, instrumentation, performance, installation, warranty details and training procedures proposed to meet the requirements of this specification.

(c) The proposal shall state detailed space requirements for equipment.

(d) If this specification leaves out any requirements or component parts that would cause the total system to not function properly, manufacturer shall provide such items. If special tools or tooling are required to operate the system, manufacturer shall provide such tools or tooling.

(e) As part of the bid package, manufacturer shall provide a description of all utilities (air, electric, etc.) required for the proper operation of the system. This list shall describe the total system requirements as well as break out of the requirements of the significant components.

(f) As part of the bid package, manufacturer / supplier shall provide a description of all utilities (air, electric, etc.)

required during the installation of the system.

9. Furnish copy of Warranty with quotation.

10. Provide past performance information as described in clause “Past Performance Proposal and Evaluation Information” if that clause is included in this solicitation.

ADDENDUM TO 52.212-1c is changed as follows:

Change 30 calendar days to 90 calendar days. The remainder of this paragraph remains the same.

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2018)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation.