Attachment_1_Aluminum_Oxide_SOW_Updated.pdf

28 May 2018

Scope of Work

ALUMINUM OXIDE ABRASIVE

1.0 SCOPE

1.1 This specification establishes the requirements for an abrasive to be used at Anniston Army Depot (ANAD). The abrasive shall be Aluminum Oxide, Coarse Grit, Type I, Class B to include the following sizes 36, 60 and 120.

1.1.1 Pricing should be quoted per pound noting below stated package specifications.

1.1.2 Packaging specifications are as follows:

1.1.2.1 Bags will be packaged as fifty pounds (50lb).

1.1.2.2 Totes will be packaged as two thousand pounds (2,000lb).

1.2 The contractor shall deliver the product specification as outlined below.

1.2.1 The contractor shall provide on a bi-weekly basis delivery of 116,000 lbs.

of 36 Coarse Grit, Type I, Class B Aluminum Oxide. The packaging requirements for this delivery will consist of 20,000 lbs. (50lb) Bags and 92,000 lbs. (2,000lb) Totes.

1.2.2 The contractor shall provide on an “as needed basis” quantities of up to 72,000 lbs. of 60 Coarse Grit, Type I, Class B Aluminum Oxide or/and 120 Coarse Grit, Type I, Class B Aluminum Oxide. Product packaging in 50lb bags or 2,000lb totes will be designated at the time of the delivery request.

1.2.3 The contractor shall provide delivery to:

Anniston Army Depot

7 Frankford Avenue Bldg. 513, Receiving

Attn: Christina Cannon Anniston, AL 36201-4199

2.0 INTENDED USE

2.1 Abrasive Cleaning Operations: The abrasive shall be used at existing facilities at

ANAD. The abrasive shall be used to blast clean metal surfaces, such as vehicle components and hardware, for removing rust, scale, and old painting and to provide surfaces that are clean and suitable for plating, coating and painting.