Amendment_0001_W564KV-18-R-0018.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide answ ers to question from offers. Please see Attachment 1 and updated Salient Requirements.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 22-May-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W564KV-18-R-0018

X 9B. DATED (SEE ITEM 11)

09-May-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

22-May-2018

CODE

TCC-KAISERSLAUTERN

KLEBER KASERNE MANNHEIMER STRASSE 238

BLDG 3233

67657 KAISERSLAUTERN

GERMANY

W564KV 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W564KV-18-R-0018

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

ATTACHMENT 1

Attachment 1 - Solicitation Questions and Answers W564KV-18-R-0018 Range Maintenance Equipment JMTG-U

Q1. Is partial bidding permitted?

A: No, only bids on the entire item list will be accepted.

It is the Government's intent to award a single contract for this requirement. In order to be acceptable, a complete quote with all items provided with pricing must be submitted.

Q2. For items 62, 64, 65, 67, 68 and 69, can brand name and/or detail specifications be provided?

A: Yes, see updated specifications (in red).

Q3. Is item 63 for a server cabinet?

Yes.

The following have been modified:

SALIENT REQUIREMENTS

Range Operations and Maintenance Support

Item

Item Qty. Unit Cost Total Cost Item Description

Electronic Repair Shop Equipment Package

1. Radio mechanic and electrical installer kit 5 $ $ Electronics toolkit with case containing at minimum a pair of side cutters, needle nose pliers, wire cutter / stripper, phillips / slotted screwdrivers of various size, nut driver and hex key set, and utility knife.

Locksmith Shop Equipment

2. Universal drilling machine (bore machine)

1 $ $ Minimum 1000W variable speed handheld drill with hammer capabilities. Should have a depth stop and foregrip.

3. Electro drilling machine 3 $ $ Minimum 500W variable speed handheld drill without hammer capabilities. Should have depth stop and foregrip.

4. Grinding and polishing machines

3 $ $ Variable speed orbital sander with a 5 - 6 inch pad.

Sheets should be easily changeable (velcro).

5. High Output Electric Lockpick 1 $ $ SouthORD E500XT or EQUIVALENT

6. Electric Lockpick Needles (10

Pack) 1 $ $ Replacement picks for electric lock picking tool to supply electric lock pick - to fit specifications of electric lockpick provided. Must be compatible with item 6 - High Output Electric Lockpick.

7. Slide Lock Auto Opening Tool 1 $ $ Long, cylindric steel bar with a hook; used for opening stuck or locked car doors; used for older and newer model automobiles.

8. 6-piece Slim Jim Kit for Auto Lockouts

1 $ $ Steel bars used for opening stuck or locked car doors; 6 different sizes; used for older and newer model automobiles.

9. Auto Jigglers - Lock Picks for Cars

1 $ $ Lock picks used for opening stuck or locked car doors;

used primarily on newer model automobiles.

10. 3 Piece Extractor Scissor Set 1 $ $ 3 Piece set of hand powered extractor tools containing 1

- ICE-1BT, 1 - SAW-RBT, 1 - SAW-LPT.

Targetry Repair and Maintenance Shop Equipment

11. Mill 20-50 ton 1 $ $ Upright hydraulic press capable of being bolted to a concrete slab. Should have a variable depth impact plate and a minimum pressing force of 20 tons.

12. Strippers (to remove bearings) 4 $ $ Blind hole internal bearing extractor kit with case.

13. Vertical drilling bench 1 $ $ Bench mounted variable speed drill press with adjustable plate.

14. Diesel generator 7-10kW 1 $ $ 220V diesel generator with a minimum rated output of 7kw.

15. Welding inverter 3-5kW 1 $ $ Welding inverter to convert AC to DC power and produce the correct welding voltage.

16. Oxygen (gas) cutter 2 $ $ 40 liter tanks for holding oxygen used for welding.

17. Oxygen hose 12m 2 $ $ Minimum 12m rubber hose for transporting welding gas.

18. Oxygen and gas reducer with manometers

2 $ $ Pressure reducer with analog manometer for welding.

19. Grinding and polishing machine with soft start 230

2 $ $ 9" disk diameter electric powered wheel rotary tool with multi-purpose detachable heads.

20. Grinding and Polishing machine with soft start 180

4 $ $ 7" disk diameter electric powered wheel rotary tool with multi-purpose detachable heads.

21. Grinding and Polishing machine with soft start 125

4 $ $ 5" disk diameter electric powered wheel rotary tool with multi-purpose detachable heads.

22. Drill, 1000w 4 $ $ Minimum 1000W variable speed handheld drill with hammer capabilities. Should have a depth stop and foregrip.

23. Drill, 800w 4 $ $ Minimum 800W variable speed handheld drill with hammer capabilities. Should have a depth stop and foregrip.

24. Hand Transported Crane Beam, 1 Ton

1 $ $ Adjustable span wheeled gantry crane capable of holding a minimum of one ton load.

25. Bench, Metal Bender, Tabletop 1 $ $ Slip roller bench metal bender with adjustable input gauge.

26. Ball Peen Hammer 3 $ $ 8.oz Wooden handle hammer

27. Tape Measure 1 $ $ 25ft x 1 inch Measuring Tape

28. Philips Screw driver set 1 $ $ 5 Philips Screw Drivers (0x1 1/2") (0x2 1/2") (1"x1 1/2") (1"x3") (2"x4")

29. Slotted Screw driver set 1 $ $ 5 Slotted Screw Drivers ( 3/32"x1 1/2") (1/8"x4") (3/16"x1 1/2"0) (3/16"x4") (1/4"x3")

30. 3/8" Ratchet set 1 $ $ 3/8" Ratchet set 21 piece

31. 1/2" Ratchet set 1 $ $ 1/2" Ratchet set 21 piece

32. Bit Driver 3 $ $ 1/4"x125mm Bit Driver

33. Torx/ Hex head for bits 3 $ $ Bit assortment for driver

34. Allen wrench set 2 $ $ Allen Wrench set 1/16"-3/8"

35. Wrench set 2 $ $ Wrench set 8mm-22mm

36. Vice grips 2 $ $ 10" Vice Grips Plier

37. Plastic F Clamps 4 $ $ F shaped Plastic clamps 6"-30"

38. Staple Gun 2 $ $ 1/4"-3/8" Staple Gun

39. Nail Gun 1 $ $ 2" 18 Gauge Nail Gun

Range Control Office Equipment

40. Laptop 10 $ $ Min I5 CPU, 4GB RAM, Discrete GPU, 256GB SSD

41. Plotter 2 $ $ HP DesignJet T795 (44", CR649C) or EQUIVALENT

42. Plotter cartridges 40 $ $ Cartridges compatible with item 41 - Plotter

43. Map laminating machine 2 $ $ Laminate width up to 65"

44. Plotter paper rolls 50 $ $ Plotter paper rolls compatible with item 41 - Plotter

45. Laminate rolls 50 $ $ To supply Laminate machine - to fit specifications of laminating machine procured

46. Fiber optic welding machine 1 $ $ Splice fiber or cable size up to φ1,000 µm Drop cable (2.0x3.1 mm), Indoor cable (2.0x2.0 mm)

47. Day/Night Security Camera 8 $ $ Day/Night camera with 64GB internal memory. Line crossing and intrusion alarm triggers

48. 8.5"x11" printer paper (A4 size) 10 $ $ Standard printer/copy paper

49. Pens 5 $ $ Ballpoint pens blue and black ink

50. Mechanical Pencils 135 $ $ 0.7mm mechanical pencils

51. Clipboard 6 $ $ Standard size clipbaords capable of holding 8.5"x11" paper

52. Permanent Markers 10 $ $ 0.6mm fine tip permanent marker

53. Binder 8 $ $ 2" D -Ring standard view binder 6-pack

54. Page Protectors (A4 size) 18 $ $ 8.5"x11" page protectors for three ring binders

55. Dry Erase Marker set 3 $ $ Low odor chisel tip dry erase marker with red, blue, green, and black

56. Adhesive notes 9 $ $ 2"x2" adhesive notepads

Woodshop Tools and Equipment

57. Wood milling machine 1 $ $ 2D / 3D CNC milling machine

58. Bench table saw 1 $ $ Adjustable depth corded table saw.

59. Polishing/sanding machine 2 $ $ Variable speed orbital sander with a 5 - 6 inch pad.

Sheets should be easily changeable (velcro).

60. Wood Lathe 1 $ $ wood lathe with minimum 15" capability for shaping wood for targetry and projects

Range Maintenance Equipment

61. Tractor 3 $ $ Yuzhmash 8270 or EQUIVALENT

62. Lawnmower/Mulcher 3 $ $ Lawnmower/mulcher must be compatible with item 62.

New Holland 769GC or equivalent

63. Transformer 2 $ $ Eltek inverter: Bravo 2U/ 19" 60VDC/ 230 VAC/ 2500- 10000 VA or EQUIVALENT

Backup Power Generation

64. Generator, 10kw trailer mounted 7 $ $ DuroMax XP10000EH or EQUIVALENT

65. Generator, 12kw 7 $ $ Briggs and Stratton 12kw Standby Generator System or

EQUIVALENT

66. Power Transformer 1 $ $ Eltek Inverter (TSL, TSZGL 250 kVA) or

EQUIVALENT

Range Vehicles

67. JCB teletruck (Model 535-140) 1 $ $ 3500kg forklift capable of high lift and all terrain movement. For use at range maintenance shop and on ranges. JCB Teletruck Model 535-140 is a specific brand name and model type.

68. Vehicles Pickup / SUV 3 $ $ All terrain 4wd vehicles for range inspections and delivery of maintenance equipment. (Mitsubishi L200 4wd Dual Cab or EQUIVALENT

69. Forklift 1 $ $ Forklift for use in range maintenance area. Traversing primarily over gravel and in warehouse. Min capacity of 5,000lbs. HCF CPCD-45 or EQUIVALENT.

Total $

(End of Summary of Changes)