17-T-0331-0001_Roller_-_Belt_Conveyor_Solicitation_Amendment.pdf

CONTRACTING OFFICE/KWH

KENT W. HACKETT

918-420-6177/MCALESTER CONTRACTING

1 C TREE ROAD

MCALESTER OK 74501-9002

W44W9M722100TG

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to correct the brand name of the conveyor equipment.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 22-Aug-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W44W9M-17-T-0331

X 9B. DATED (SEE ITEM 11)

14-Aug-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

22-Aug-2017

CODE

CONTRACTING OFFICE

MCALESTER CONTRACTING OFFICE

1 C TREE ROAD

MCALESTER OK 74501-9002

W44W9M 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W44W9M

FACILITY CODECODE

EMAIL:TEL:

W44W9M-17-T-0331

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

ROLLER & BELT CONVEYOR SYSTEM PER THE ATTACHED PURCHASE DESCRIPTION. OSBORN

EQUIPMENT SALES PART #OES05092017. BRAND NAME, NO SUBSTITUTE.

To:

ROLLER & BELT CONVEYOR SYSTEM PER THE ATTACHED PURCHASE DESCRIPTION. NEW

LONDON ENGINEERING, PART #OES05092017. BRAND NAME, NO SUBSTITUTE..

The following have been modified:

PURCHASE DESCRIPTION

PURCHASE DESCRIPTION – ROLLER/BELT CONVEYOR

Brand Name Only: New London Engineering, Part #OES05092017 Roller and Belt Conveyor System, Qty. 1

Qty: 1 Each, Item #U1, U2, U3 (Upper Slider Bed Powered Belt Conveyors)

• Motor: 2.00hp 460/3/60 Custom Baldor Xpfc (Similar To Baldor Idnm7037t Class 1, Div 1, Group D, Class 2 Div 1, Group E,F&G )

• Conveying Speed - 60fpm

• Pulleys: Stainless Steel

• Flat Faced Rubber Lagged 8" Diameter X 18" Wide X 1.4375" Bore V-Grooved For A-Section V-Guide Drive

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore V-Grooved For A- Section V-Guide Infeed

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore

• Belts: 18" Wide, Habasit Um155sc-B Ultimate With A-Section V-Guide Centered On Bottom Of Belt With #125 Staple Lace, Less than 5 million ohm.

• Frame: Formed 10 Ga X 6.625" Deep X 21.5" Wide Stainless Steel 304 2b Dull Mill Finish

• Common Supports: 4 Pair for 48" Top of Belt

• Knee Brace

• Send Drive Shaft Mount Right Angle Discharge Facing On Right Side When Looking In the Direction of Product Travel

• Stainless Steel Transfer Rollers Both Ends

• Stainless Steel Transfer Wheel at Discharge on Left Hand Side

• Stainless Steel 1.5" High Siderails Full Length Both Sides

• Stainless Steel Return Rollers

• Capacity: 50 lbs. /Ft.

Qty: 1 Each, Items # L1, L2, L3 - (Lower Gravity Conveyor

1. 910-18"-22'0" Long Gravity Roller at 30" Top Of Roller Common Supports With

2. Formed 10 Gauge S.S. Frame X 3.5" Deep and 1.5" S.S. Siderails

3. Gravity Rollers on 3" Centers Set High

4. 18" Between Frames

5. 1.9" OD X 16 Ga. S.S. 304 Welded (Mill Finish) Tube

6. Precision, Plastic Housed, S.S., Sealed, Greased Bearings

7. 7/16" Hex S.S. Axle, 19-1/4" Long Spring Retained On One End

8. Capacity 50 lbs./Ft

9. Conveyor to Be Grounded In Field

Material Conveyed: 15" Diameter X 15" High X 50# on 15" Centers

Qty: 1 Each, Item #U4 (Upper Slider Bed Powered Belt Conveyors)

• Motor: 2.00hp 460/3/60 Custom Baldor Xpfc (Similar To Baldor Idnm7037t Class 1, Div 1, Group D, Class 2 Div 1, Group E,F&G)

• Conveying Speed - 60fpm

• Pulleys: Stainless Steel

• Flat Faced Rubber Lagged 8" Diameter X 18" Wide X 1.4375" Bore V-Grooved For A-Section V-Guide Drive

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore V-Grooved For A- Section V-Guide Infeed

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore

• Belts: 18" Wide, Habasit Um155sc-B Ultimate With A-Section V-Guide Centered On Bottom Of Belt With #125 Staple Lace. Less than 5 million ohm.

• Frame: Formed 10 Ga X 6.625" Deep X 21.5" wide Stainless Steel 304 2b Dull Mill Finish

• Common Supports: 4 Pair for 48" Top of Belt

• Knee Brace

• Send Drive Shaft Mount Right Angle Discharge Facing On Right Side When Looking In the Direction of Product Travel

• Stainless Steel Transfer Rollers Both Ends

• Stainless Steel Transfer Wheel at Discharge on Left Hand Side

• Stainless Steel 1.5" High Siderails Full Length Both Sides

• Stainless Steel Return Rollers

• Capacity: 50lbs. /Ft.

Qty: 1 Each, Items # L4, (Lower Gravity Conveyor - Included In Pricing Above)

1. Model #910-18"-20'0" Long Gravity Roller at 30" Top Of Roller Common Supports With 311

2. Formed 10 Gauge S.S. Frame X 3.5" Deep and 1.5" S.S. Siderails

3. Gravity Rollers on 3" Centers Set High

4. 21.50” wide and 18" inside Frame

5. 1.9" OD X 16 Ga. S.S. 304 Welded (Mill Finish) Tube

6. Precision, Plastic Housed, S.S., Sealed, Greased Bearings

7. 7/16" Hex S.S. Axle, 19-1/4" Long Spring Retained On One End

8. Capacity: 50 lbs. /Ft

9. Conveyor to Be Grounded In Field

Qty: 1 Each, Item #L5 (Upper Powered Conveyors)

• Motor: 2.00hp 460/3/60 Custom Baldor Xpfc (Similar To Baldor Idnm7037t Class 1, Div 1, Group D, Class 2 Div 1, Group E,F&G)

• Conveying Speed - 60fpm

• Pulleys: Stainless Steel

• Flat Faced Rubber Lagged 8" Diameter X 18" Wide X 1.4375" Bore V-Grooved For A-Section V-Guide Drive

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore V-Grooved For A- Section V-Guide Infeed

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore

• Belts: 18" Wide, Habasit Um155sc-B Ultimate With A-Section V-Guide Centered On Bottom Of Belt With #125 Staple Lace. Less than 5 million ohm.

• Frame: Formed 10 Ga X 6.625" Deep X 21.5" wide Stainless Steel 304 2b Dull Mill Finish

• Supports: 2 Pair for 48" Top of Belt

• Knee Braces

• End Drive Shaft Mount Right Side When Looking In the Direction Of Product Travel

• Stainless Steel Transfer Rollers Both Ends

• Stainless Steel 1.5" High Siderails Full Length Both Sides

• Stainless Steel Return Rollers

• Conveyor to Be Grounded In Field.

• Capacity50 lbs. /Ft.

Qty: 1 Each, Item #U5 (Upper Powered Decline Conveyor)

• Motor: 2.00hp 460/3/60 Custom Baldor Xpfc (Similar To Baldor Idnm7037t Class 1, Div 1, Group D, Class 2 Div 1, Group E,F,&G)

• Conveying Speed: 60 Fpm

• Pulleys: Stainless Steel

• Flat Faced Rubber Lagged 8" Diameter X 18" Wide X 1.4375" Bore V-Grooved For A-Section V-Guide Drive

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore V-Grooved For A- Section V-Guide Infeed

• Flat Faced Plain 4" Diameter X 18" Wide X 1.1875" Bore

• Belts: 18" Wide, Habasit Um155sc-B Ultimate with A-Section V-Guide Centered On Bottom of Belt With #125. Less than 5 million ohm.

• Staple Lace

• Frame: Formed 10 Ga X 6.625" Deep X 21.5" wide Stainless Steel 304 2b Dull Mill Finish

• Supports: 2 Pair for 48" Top of Belt at Infeed Decline to 30" Top of Belt at Discharge

• Knee Braces

• Center Drive Shaft Mount Right Angle Discharge Facing On Right Side When Looking In The Direction Of Product Travel

• Stainless Steel Transfer Rollers Both Ends

• Stainless Steel 1.5" High Siderails Full Length Both Sides

• Stainless Steel Return Rollers

• Conveyor to Be Grounded In Field

• Capacity: 50 Lbs. /FT

(End of Summary of Changes)