Trailer Specifications.docx

Customized Response Trailer Customer Requirement:

The trailer will be used in response to aircraft crashes, suspicious packages, gas leaks, radiation incidents, chemical/biological attacks, and must be capable sustaining charged and calibrated equipment. Storage capacity is necessary through cabinets and countertop as well as gas tank brackets. Additionally, a generator with a plug to be connected to an electrical outlet in the trailer.

The requested trailer will need to include an air conditioner and insulated walls that ensure a temperature controlled environment for equipment, cabinets/wall lockers to safely store equipment, countertop space to stage response items, brackets to securely hold gas tanks during transport, and a generator to power the trailer and equipment.

Interior and exterior electrical outlets will be installed to charge equipment while on scene, and will have the capability to maintain temperature and power response equipment while staged at the clinic. Furthermore, the new trailer will be large enough to allow personnel to dress-out for response as well as rehabilitate in a climate controlled environment.

The below list represents a general list of specifications which would satisfy the customer’s requirements and serves as a quantifiable example meeting the general mission need described above.

Product Specifications:

- Exterior Length: 28 feet

- Exterior Width: 8 feet 6 inches

- Interior Height: 7 feet

- # of Axles: At least 2

- Hitch: 2 5/16" Adjustable Ball & Pintle Hitch Coupler

- Suspension: 6,000# Torsion (12,000# G.V.W.R.)

- Tires: ST235/80R16/LRE

- Tandem axle 6.0K rubber torsion. Includes (4) ST235/80R16/LRE 8-hole on steel wheel. (Includes conspicuity tape)

- Electric brakes on axles

- Matching spare tire and rim

- Interior infloor spare tire compartment

- Heavy-duty extended triple tube A-frame

- 16" O/C floor, wall & roof tube cross members

- Full steel commercial frame

- Aluminum one-piece roof system (28 FT)

- Nose full width of trailer with squared corners

- Interior head clearance (28 FT)

- Skid plate at rear underside of trailer

- Jack manual crank type with footplate

- 6-inch steel tube mainframe

- 14K switchable adjustable coupler

- 2 5/16" ball & pintle eye

- Pair of 7,500# commercial manual scissor jacks, placed @ front and rear of trailer (2 EA)

- Commercial exterior DOT light package w/ 12V LED clear lens (Incl. yellow/red clearance lights & stop/turn lights)

- Screw-less .040 White smooth aluminum skin (28 EA)

- Commercial 7-way round trailer wire harness and safety chains with hooks

- Commercial heavy-duty bottom rail for field use

- 14" x 14" (at least) manual roof vent, place in rear room of trailer

- Front polished cast corners w/ front stainless steel insert and stainless steel front verticals (does not have to be the trailer)

- Stainless steel wrapped rear verticals

- 25' manual awning w/ weathershield

- Tongue mounted ATP generator compartment

- Commercial heavy-duty 36" side entry door plus window w/ flush latch & deadbolt lock

- Aluminum slide out step @ entry door

- Commercial stainless steel fold out grab handle

- Heavy-duty rear ramp door w/ spring assist, 16" transition flap to ground & barlocks, includes aluminum transition flap

- 7' Interior height

- Line white screw-less .030 aluminum on walls, ceiling & ceiling cove per foot

- R7 Insulated walls & ceiling per foot

- Commercial grade raised black rubber coin over 3/4" plywood floor, includes rear ramp door

- Stainless steel 7.3 cu. ft. refrigerator freezer combo, 12V/120V, located on front wall of trailer

- Aluminum partition wall w/ pocket door, lined w/ white aluminum and insulation

- Walkout SCBA tank holder - Black/Yellow

- 24"W heavy-duty aluminum 7-drawer tool chest, located on front wall of trailer

- Aluminum 24"D lower cabinet w/ aluminum countertop per foot, located on front & R/S walls

- Aluminum 48"W full height storage cabinet w/ (3) adjustable shelves, located on C/S aft entry door

- 24"W heavy-duty aluminum 3-drawer tool chest insert, located on R/S wall

- 24"W heavy-duty aluminum 5-drawer tool chest, located on front wall of trailer

- 24"D aluminum countertop w/ support legs per foot, located aft 48"W storage cabinet on C/S wall

- 96"W x 24"D Heavy-duty fold down aluminum bench seat

- Commercial 50 amp electrical package - Includes 50 amp panel, 50 amp exterior motorbase plug, 36' commercial shore cord (50 amp)

- 7.0kw gas commercial generator package - Includes remote start, generator prep pkg, 50 amp gen recept, 50 amp auto transfer switch, 30 gallon under frame fuel tank, cast aluminum fuel fill door, dedicated 12V battery & battery box and carbon fiber control panel

- Interior 15 amp duplex recept

- Exterior 15 amp duplex recept

- GFI - 12V LED interior surface mount light - 15,000 BTU roof mounted A/C unit w/ heat pump

- Wall mounted A/C thermostat - 9"x7" exterior 12V LED scene light w/ hi-lo switch (2 on each side wall)

- 12V light switch

- 45 amp converter w/ battery charger

- 12V marine grade battery & battery box (Interior)