TEST BENCH SALIENT CHARACTERISTICS.pdf

TEST BENCH SALIENT CHARACTERISTICS

PART NUMBER: MTTB10-W-O-G-M-L10-L100-L10-L100-DLA5-DLE30-75-7.5G-DG-DRD

City Water Test Circuit

• • L10-VE single air head air driven pump, 11:1 pressure ratio, 5.49 in³/cycle displacement, stainless steel construction, UHMWPE seals and Viton O-rings. Suitable for pressure tests from 165-

1,100 PSI

• • L100-VE single air head air driven pump, 113:1 pressure ratio, 0.54 in³/cycle displacement, stainless steel construction, UHMWPE seals and Viton O-rings. Suitable for pressure tests from

1,100-10,000 PSI

• • Inlet water bulkhead with 20 micron water filter and panel mount shutoff valve

• • Two manual pressure isolation valves in series, panel mounted.

• • Manual pressure vent valve, panel mounted

• • Pressure relief valve 100-1,000 psi adjustable, with isolation valve, panel mounted.

• • Pressure relief valve 1,000-10,000 psi adjustable, panel mounted.

• • Dual 4” outlet pressure gauges, 0-3,000 psi, panel mount, with isolation valve.

• • Dual 4” outlet pressure gauges, 0-10,000 psi, panel mount.

• • Inlet air drive filter

• • Panel mount drive air regulator with gauge

• • Individual air shut-off valve for each pump, panel mounted.

Hydraulic Oil Test Circuit

• • L10-VE single air head air driven pump, 11:1 pressure ratio, 5.49 in³/cycle displacement, stainless steel construction, UHMWPE seals and Viton O-rings. Suitable for pressure tests from 165-

1,100 PSI

• • L100-VE single air head air driven pump, 113:1 pressure ratio, 0.54 in³/cycle displacement, stainless steel construction, UHMWPE seals and Viton O-rings. Suitable for pressure tests from

1,100-10,000 PSI

• • Inlet oil bulkhead with 10 micron spin-on filter and panel mount shutoff valve

• • Two manual pressure isolation valves in series, panel mounted.

• • Manual pressure vent valve, panel mounted

• • Pressure relief valve 100-1,000 psi adjustable, with isolation valve, panel mounted.

• • Pressure relief valve 1,000-10,000 psi adjustable, panel mounted.

• • Dual 4” outlet pressure gauges, 0-3,000 psi, panel mount, with isolation valve.

• • Dual 4” outlet pressure gauges, 0-10,000 psi, panel mount.

• • Inlet air drive filter

• • Individual air shut-off valve for each pump, panel mounted.

Compressed Air Test Circuit

• • DLE5 single stage double acting single air head gas booster, 5:1 ratio, to boost incoming air to 600 psi

• • DLE30-75 two stage double acting single air head gas booster, 75:1 ratio, to boost 600 psi air to 8,700 psi maximum.

• • 1 Gallon 1,800 psi inter-stage bottle between boosters.

• • 1 Actual Cubic Foot (ACF) air receiver, 10,000 psi rated.

• • High pressure outlet pressure switch to switch the boosters of at 8,700 psi maximum. Pilot switch adjustable 4,350-8,700 psi.

• • Outlet gas regulator, 200-8,700 psi adjustable, panel mounted.

• • Inlet air bulkhead with 40 micron filter and panel mount shutoff valve

• • Two manual pressure isolation valves in series, panel mounted.

• • Manual pressure vent valve, panel mounted

• • Pressure relief valve 100-1,000 psi adjustable, with isolation valve, panel mounted.

• • Pressure relief valve 1,000-10,000 psi adjustable, panel mounted.

• • Dual 4” outlet pressure gauges, 0-3,000 psi, panel mount, with isolation valve.

• • Dual 4” outlet pressure gauges, 0-10,000 psi, panel mount.

• • Inlet air drive filter

• • Individual air shut-off valve for each booster, panel mounted.