Technical Exhibits_BOX TRUCK.pdf
PDF 243 KB Posted
- Attached to
- 26ft Box Truck Federal contract opportunity
- Solicitation number
- PANMCC-24-P-0000004643
About this file
This file contains technical exhibits related to a federal contract opportunity for box trucks. The technical exhibits provide performance requirements, deliverables schedules, and resources on California air regulations for the box trucks. Performance Requirement Summary 1 establishes the contractor shall deliver equipment with all necessary original parts and a full tank of fuel per the operator's manual. The equipment must be 100% functional upon delivery, with non-conformances or repeated failures resulting in corrective actions. Deliverables Schedule 2 lists the quality control plan as the only deliverable, to be submitted electronically to the contracting officer and contracting representative, with updates as required. Technical Exhibit 3 provides resources on California air regulations for in-use off-road diesel vehicles and large spark ignition engine fleets. It also outlines labeling and registration requirements for low-use vehicles.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 4. QSAP Box Truck-NTC 24-04 Complete.pdf | ||
| 3. PWS Box Truck NTC 24-04 Complete.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Part 7
ATTACHMENT/TECHNICAL EXHIBIT LISTING
7. Attachment/Technical Exhibit List:
7.1. Technical Exhibit 1 – Performance Requirements Summary
7.2. Technical Exhibit 2 – Deliverables Schedule
7.3. Technical Exhibit 3 – California Air Regulations and Resources
7.4. Technical Exhibit 4 – Appendix A.
7.5. Technical Exhibit 5 – Range Clearance & Road Closures
TECHNICAL EXHIBIT 1
PERFORMANCE REQUIREMENTS SUMMARY
The Contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.
Performance Objective
(The Service required—usually a shall statement)
Standard Performance Threshold
(This is the maximum error rate. It could possibly be
“Zero deviation from standard”)
Incentive/Disincen tive
PRS # 1.
The Contractor shall ensure equipment is delivered with all necessary original equipment parts IAW the operator’s manual and have a full tank of diesel fuel, if require PWS. 5
The equipment shall be 100% fully functional IAW the operator’s manual upon delivery.
100%
First failure will result in the issuance of a Non-Conformance
Report (NCR) Continuance of not meeting performance standard (2 or more) a corrective action plan will be developed at the discretion of the KO
TECHNICAL EXHIBIT 2
DELIVERABLES SCHEDULE
Deliverable Frequency # Of Copies Medium/Format Submit To
Quality Control Plan
One time, with updates as required 1 PDF via e-mail KO, COR
TECHNICAL EXHIBIT 3
CALIFORNIA AIR REGULATION & RESOURCES
In-Use Off-Road Diesel-Fueled Fleets:
- https://ww2.arb.ca.gov/sites/default/files/classic/msprog/ordiesel/documents/finalregorder-dec2011.pdf
- CCR Title 13, Section 2275, Large Spark-Ignition (LSI) Engine Fleet Requirements https://ww2.arb.ca.gov/our-work/programs/large-spark-ignition-lsi-engine-fleet-requirements-regulation
Proper labeling and registration of low-use if not Tier 4f engine:
- Fleets report online through CARBS website –DOORS – contractors can provide information
Equipment Identification Numbers (EIN) labels will be:
- Color: The color of the EIN label is dependent on the type of fleet. Most EIN labels must be white on a red background.
- Placement: The EIN label must be located in clear view on both sides of the outside of the vehicle, approximately 5 feet above ground. If the vehicle is not 5 feet tall, the label may be placed lower on the vehicle.
- Size of label: Each character of the EIN needs to be at least 3” tall and 1.5” wide.
- Integrity: The EIN must be maintained in a manner that retains its legibility for the entire life of the vehicle.
Fort Irwin Environmental Policy:
- Must have a secondary containment while parked – under the fuel dispensing area
File details come from the government source that posted it. Updated .