Tech Evaluation.pdf
PDF 570 KB Posted
- Attached to
- M22-051 Steel Studs Federal contract opportunity
- Solicitation number
- FA8126-22-Q-0066
About this file
This federal solicitation requests quotes for various construction steel items including roof joists, sheet metal, plate steel, decking, angle, and beams. Required products include cold formed steel studs and tracks, hollow structural steel sections, pipes, plates, angles, decking, and roof joists in various sizes and materials. Quotes are due by the deadline specified and must include a small business subcontracting plan. The contracting agency is the Department of the Air Force Materiel Command Air Force Sustainment Center for delivery to Tinker Air Force Base. All steel products must meet specifications for material grade and coating in the relevant ASTM standards.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| item description rev4.pdf | ||
| Tech Evaluation rev1.pdf | ||
| CSS_FA812622Q0066.pdf | ||
| item description rev3.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL PROPOSAL EVALUATION-CRITICAL FACTOR LIST
2 September 2016
SPECIFIC REQUIREMENT
ACCEPTABLE NON-
ACCEPTABLE
REMARKS
• THIRTY (30) 400S200-97 CFS METAL STUDS
STRUCTURAL SECTION WITH LIP;
o 4 INCH WEB DEPTH o 12 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o 20 FOOT LONG
• SIXTY FIVE (65) 1400S200-97 CFS ROOF JOISTS
STRUCTURAL SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o WITHOUT PUNCHOUTS
• FIVE (5) 1400S200-97 CFS ROOF JOISTS ROOF
JOISTS STRUCTURAL SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o 36 FOOT 1 5/8 INCH LONG
• ONE HUNDRED TWENTY THREE
(123) 1400S200-97 CFS ROOF JOIST
STRUCTURAL SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GUAGE THICKNESS o 2 INCH FLANGE WIDTH o 34 FOOT 11 3/8 INCH LONG
• SIX (6) 1400S200-97 CFS ROOF JOISTS
STRUCTURAL SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GUAGE THICKNESS o 2 INCH FLANGE WIDTH o 28 FOOT 1 3/8 INCH LONG
• TWENTY EIGHT (28) 1400S200-97 CFS
ROOF JOISTS STRUCTURAL SECTION WITH
LIP;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 22 FOOT 8 ½ INCH LONG
• TWENTY FOUR (24) 1400S200-97 CFS
ROOF JOIST STRUCTURAL SECTION WITH
LIP;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o 26 FOOT 6 3/8 INCH LONG
• ONE HUNDRED FOUR (104) 1400S200-
97 CFS ROOF JOISTS STRUCTURAL
SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GAGUE THICKNESS o 2 INCH FLANGE WIDTH o 21 FOOT 5 ½ INCH LONG
• ONE HUNDRED EIGHT (108)
1400S200-97 CFS ROOF JOISTS
STRUCTURAL SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o 27 FOOT 9 3/8 INCH LONG
• ONE HUNDRED TWENTY SIX (126)
1400S200-97 CFS ROOF JOISTS
STRUCTURAL SECTION WITH LIP;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o 26 FOOT 11 1/8 INCH LONG
• TWENTY FIVE (25) 600S200-54 CFS
METAL STUDS STRUCTURAL SECTION
WITH LIP;
o 6 INCH WEB DEPTH o 16 GAUGE THICKNESS o 10 FOOT LONG
• FOUR HUNDRED SEVENTY FIVE
(475) 400T200-54 CFS METAL TRACK
SECTION WITHOUT LIP;
o 4 INCH WEB DEPTH o 16 GAUGE THICKNESS o 2 INCH FLANGE WIDTH o 10 FOOT LONG
• ONE HUNDRED (100 EACH) 400S200-
54 CFS METAL STUDS STRUCTURAL
SECTION WITH LIP;
o 4 INCH WEB DEPTH o 16 GAUGE THICKNESS o 16 FOOT LONG
• ONE THOUSAND FIVE HUNDRED
NINTY FIVE (1595 EACH) 400S200-54 CFS
METAL STUDS STRUCTURAL SECTION
WITH LIP;
o 4 INCH WEB DEPTH o 16 GAUGE THICKNESS o 14 FOOT 1-3/4 INCH LONG
• FIVE HUNDRED THIRTY FIVE (535
EACH) 400S200-54 CFS METAL STUDS
STRUCTURAL SECTION WITH LIP;
o 4 INCH WEB DEPTH o 16 GAUGE THICKNESS o 15 FOOT 3-3/4 INCH LONG
• TWO THOUSAND TWO HUNDRED
TWENTY FIVE (2,225) 400S200-54 CFS
METAL STUDS STRUCTURAL SECTION
WITH LIP;
o 4 INCH WEB DEPTH o 16 GAUGE THICKNESS
• THREE HUNDRED FOURTY (340)
STEEL DECK TYPE 1.5B, COVER WIDTH 36
INCH, G60 GALVANIZED, NESTED SIDELAP,
ASTM A653 FY 50 KSI;
o 22 GAUGE THICKNESS o 20 FEET LONG
• ONE THOUSAND (1,000 EACH)
SUPPORT CLIPS FOR RIGID STNADOFF
COLD FORMED STEEL FRAME
CONNECTION, PREPUNCHED, ASTM A653,
FY 50 KSI, COATING G90;
o 12 GAUGE THICKNESS o SIZE: 11 INCH WEB DEPTH X 4 INCH
WIDE X 1 ½ INCH LEG
o 25 BUCKETS OF 40 EACH o SUPPORT CLIP SHEAR CPACITY
RATED FOR MINIMUM 2400 LBS
• ONE THOUSAND ONE HUNDRED
SIXTY (1,160) CFS HEAVY DUTY DOUBLE
LEG RESILIENT CHANNEL, RC-2 PROPLUS
RESILIENT CHANNELS FOR CEILING
APPLICATION;
o 22 MIL THICKNESS o 2 ½ INCH X ½ INCH DEEP X 12 FOOT
LONG
o MEET ASTM C645, MATERAIL
COATING G60, FY 33 KSI
• TWO HUNDRED FIFTY (250) 087F125-
54 CFS FURRING CHANNEL SECTION, HAT-
SHAPED FRAMING COMPONENT FOR CFS
WALL FRAMING APPLICATION;
o 7/8 INCH DEPTH X 16 GAUGE
THICKNESS X 12 FOOT LONG, OVERALL
WIDTH 2-23/32 INCH.
o ASTM C955, FY 50 KSI, G60
• ONE THOUSAND EIGHT HUNDRED
(1,800 EACH) SUPPORT CLIPS ANGLES FOR
COLD FORMED STEEL FRAME
CONNECTION, PREPUNCHED, ASTM A653,
FY 50 KSI, COATING G90;
o 16 GAUGE THICKNESS o 2 INCH LEG X 2 INCH LEG X 3-3/8
INCH WEB DEPTH
o 9 BUCKETS OF 200 EACH o SUPPORT CLIP SHEAR CAPACITY
RATED FOR MINIMUM 1000 LBS
• TWO HUNDRED TWENTY (220)
PURLIN BEARING RIB (PBR)- WALL PANEL
SIDING;
o 24 GAUGE THICKNESS o CONFORM TO ASTM A792 AND ASTM
A653, FY 50 KSI
o 1-1/4” RIB HEIGHT o PANLE COVERAGE WIDTH 36 INCH o RIB SPACING 12 INCH ON CENTER o WHITE COLOR FINISH
• SEVEN THOUSAND (7,000) PBR
PANEL SCREWS;
o SIZE #12-14 X 3/4 INCH HEX WASHER
HEAD
o SELF DRILLING PBR SCREWS o WHITE FINISH COLOR
• One Hundred Fifteen (115) 20 GAUGE
GALVANIZED SHEET METAL;
o 5 FOOT X 10 FOOT o G90
• Eighty (80) 22 GAUGE GALVANIZED
SHEET METAL;
o G90
• Fifty (50) 16 GAUGE CARBON STEEL
PLAIN SHEET METAL;
• FIFTY (50) 20 GUAGE CARBON STEEL
PLAIN SHEET METAL:
o 4 FOOT WIDE X 8 FOOT LENGTH
• One (1) 12 GAUGE 304 GRADE
STAINLESS STEEL PLAIN SHEET METAL;
o Must meet ASTM A240
• Fourteen (14) 11 GAUGE CARBON
STEEL SHEET METAL;
• Two (2) PLAIN PLATE STEEL;
o 5/8 INCH X 60 INCH X 120 INCH
• ONE (1) DIAMTER ½ INCH SOLID
ROUND PALIN ROD, 20 FEET
• TWO (2) DIAMETER ¾ INCH SOLID
ROUND PLAIN ROD, 20 FEET
• TWELEVE (12) WIDE FLANGE STEEL
SECTION BEAMS;
o W14 X 26, 14 INCH DEEP, 26LB/FT o 25 FOOT LONG
• THREE (3 EACH) WIDE FLANGE
STEEL SECTION BEAMS;
o W14 X 26, 14 INCH DEEP, 26 LB/FT
• ONE (1) PLATE STEEL;
o 3/8 INCH THICKNESS X 60 INCH
WIDE X 120 INCH LENGTH
• TWENTY (22) SQUARE TUBES STEEL
SECTION (HOLLOW STRUCTURAL
SECTION);
o 5/16 INCH WALL THICKNESS o 4 INCH X 4 INCH X 20 FOOT LENGH
• ONE HUNDRED SEVENTY (170 EACH)
SCHEDULE 10 BLACK IRON PIPE;
o 1 ½ INCH INSIDE NOMINAL
DIAMETER X 21 FOOT LONG
• TWO (2) C CHANNELS STEEL
SECTION;
o C10 X 15.3, 10 INCH DEEP X 15.3
LB/FT, 2.6 INCH FLANGE WIDTH
• TWO (2) STEEL DIAMOND TREAD
STEEL PLATE;
o 3/16 INCH THICKNESS X 60 INCH
• ONE (1) ANGLE IRON STEEL
o 3/16 INCH THICKNESS X 1 INCH
WIDE X 1 INCH DEPTH
• TWO (2) ANGLE IRON STEEL
o 3/16 INCH THICKNESS X 2 INCH
WIDE X 2 INCH DEPTH
• TWELVE (12) SQUARE TUBE STEEL
SECTION (HOLLOW STRUCTURAL
SECTION)
o ¼ INCH WALL THICKNESS o 4 INCH X 4 INCH, 20 FOOT LONG
• SEVENTY FIVE (75) DIAMOND
TREAD STEEL PLATE;
o 1/8 INCH THICKNESS X 60 INCH
• FORTY (40) PLAIN PLATE STEEL;
o ¼ INCH THICKNESS X 60 INCH WIDE
X 120 INCH LENGTH
• TWO (2) ANGLE IRON STEEL
SECTION
o ¼ INCH THICKNESS X 3 INCH X 2
INCH D
• ONE (1) SQUARE TUBES;
o 1/8 INCH WALL THICKNES o 1 INCH x 1 INCH
• TEN (10) SQUARE TUBES;
o 0.125 INCH WALL THICKNESS o 3 INCH X 3 INCH o 24 FOOT LONG
• FIFTY FIVE (55) 1400T125-97 – CFS
STRUCTRUAL RIM TRACK WITHOUT TAB;
o 14 INCH WEB DEPTH o 12 GAUGE THICKNESS o 1 ¼ INCH FLANGE WIDTH
• Technical Drawings or photos for all above listed items shall be submitted with official quotes.
File details come from the government source that posted it. Updated .