Tab 4-Statement of Work Various Small Sized Pallets for Hazardous Warehouse 28.pdf

STATEMENT OF WORK

Various Small Pallets Contract

DLA Distribution San Joaquin, CA, Tracy Site November 8, 2023

1. DESCRIPTION:

This Statement of Work (SOW) details the requirements for an annual contract for various sized pallets, utilized at DLA Distribution Center San Joaquin, CA.

2. OBJECTIVES:

The purpose of this service contract is shipping various product and materials to support the warfighter.

3. GENERAL REQUIREMENTS:

3.1. Supply Various sized Pallets Bearing ISPM 15 compliant WPM Stamp on opposing sides pallet to be delivered to WH 28 Monthly

3.2. No additional labor, cost or travel expense to DDJC

3.3. Period of Performance: December 1, 2023, through December 1, 2024

3.4. Construction of the Pallets shall be from Class 3 Heat Treated Lumber or better with the 2x4 in set 3.5” from each end of the deck to make a Wing Tip Style pallet. 2” ring shank nails are to be used to assemble the pallet and 2 nails are to be used at each adjoining location of 1x to 2x4.

Piece count to be assembled is as follows:

3.4.1. Pallet 24x24x6: Top deck is made of 3 nominal 1”x6”x24” 1 in front and 1 in back are flush to the end of the cross member (2x4) and 1 evenly spaced in the middle. Bottom is made of 2 nominal 1”x4”x24” and flush to the ends of the cross member (2x4). Crossmembers are to be made of nominal 2”x4”x24” and must bear an easily viewed ISPM 15 compliant stamp on opposing sides of the assembled pallets 2x4. ISPM 15 Compliant Stamp must be incompliance with DoDM 4140.65, July 2, 2020, Section 3.2-Table 2: elements table 1-5

3.4.2. Pallet 26x16x6: Top deck is made of 2 nominal 1”x6”x24” 1 in front and 1in back are flush to the end of the cross member (2x4) and 1 nominal 1”x4”x16” evenly spaced in the middle.

Bottom is made of 2 nominal 1”x4”x24” and flush to the ends of the cross member (2x4).

Crossmember are to be made of nominal 2”x4”x24” and must bear an easily viewed ISPM 15 compliant stamp on opposing sides of the assembled pallets 2x4. ISPM 15 Compliant Stamp must be incompliance with DoDM 4140.65, July 2, 2020, Section 3.2-Table 2:

elements table 1-5

3.4.3. Pallet 30x30x6: Top deck is made of 4 nominal 1”x6”x24” 1 in front and 1 in back are flush to the end of the cross member (2x4) and 2 evenly spaced in the middle. Bottom is made of 2 nominal 1”x4”x24” and flush to the ends of the cross member (2x4). Crossmember are to be made of nominal 2”x4”x24” and must bear an easily viewed ISPM 15 compliant stamp on opposing sides of the assembled pallets 2x4. ISPM 15 Compliant Stamp must be incompliance with DoDM 4140.65, July 2, 2020, Section 3.2-Table 2: elements table 1-5

3.5. Delivery of pallets:

3.5.1. Pallet 24x24: Delivery of 880 every month

3.5.2. Pallet 26x16: Delivery of 540 every month

3.5.3. Pallet 30x30: Delivery of 430 every month

3. PLACE OF PERFORMANCE:

The Primary place of performance will be vendor deliver to WH 28 sec 3 east side.

4. AUTHORIZED GOVERNMENT PERSONNEL:

A POC will be designated prior to award to be responsible for monitoring progress and overall technical management of this order and should be contacted regarding questions or problems of a technical nature. In no event, however, will any understanding or agreement, modification, or other matter deviating from terms of this order between contractor and any person other than the Contracting Officer be effective or binding upon the Government, unless formalized by proper contractual documents executed by Contracting Officer prior to completion of this order. On matters that pertain to the order terms, contractor will contact the Contracting Officer.

A. Contracting Officer Representative (COR):

Tony Zuk, (209) 839-4114, Anthony.zuk@dla.mil

B. Government Point of Contact (GPOC):

Kristen Roberts, (209) 839-4780, Kristen.roberts@dla.mil mailto:Kristen.roberts@dla.mil