Tab 12 SPRTA1-23-Q-0252 Final.pdf

MEMORANDUM FOR: Lockheed Martin Corporation

FROM: DLA Aviation – AOBA / 3001 Staff Dr., 2B93 / Tinker AFB, OK 73145

SUBJECT: Letter Solicitation SPRTA1-23-Q-0252

This Solicitation is issued for the purpose of acquiring the NSN: 1680010773420RK ACTUATOR,ELECTRO- ME P/N: 16K0745-5, P/N: 1680PL0861547 which Lockheed Martin Corporation is the only qualified source.

CLIN P/N NSN Noun Quantity Range 0001 16K0745-5 1680010773420 ACTUATOR,ELECTRO-ME MIN 2 , BEQ 6, Max 9

Please provide pricing and delivery for purchase of this NSN in accordance with the terms and conditions of SPE4A118G001.

Lockheed Martin Corporation is requested to provide capacity, PLT and pricing based upon the quantity listed below.

Quantities: The current required quantity is MIN 2 , BEQ 6, Max 9

IUID APPLIES: DFARS 252.211.7003

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required.

Quality Assurance:

Higher Level Contract Quality Requirements: AS 9100 Buy American Act/balance of Payments Program

Requested Delivery: On or Before 31 MAR 2026

Ship to: SW3210 See NOTE 2 - Transportation Document

The terms and conditions of SPE4A118G001 will apply to this NSN. Please respond with your pricing and delivery for the item by the solicitation closing date of 12 May 2023. If you have any further questions, please contact Erin Akin at erin.akin@us.af.mil.

Sincerely, //SIGNED//

Erin Akin Contracting Officer Date: 11 April 2023

ATTACHMENTS:

NOTE 1 – Packaging to be accomplished IAW the Packaging Requirements documents attached.

NOTE 2 - Transportation to be accomplished IAW the applicable Transportation documents attached.

NOTE 3 – IUID Checklist

DEFENSE LOGISTICS AGENCY

AVIATION AT OKLAHOMA CITY

3001 STAFF DRIVE SUITE 2AG1 109B

TINKER AIR FORCE BASE, OKLAHOMA 73145-3015

11 April 2023 mailto:erin.akin@us.af.mil

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

1680010773420RK

VERSION NUMBER

NOUN

ACTUATOR,ELECTRO-ME

INITIATOR

KISSICK, CHRISTOPHER M

ORGANIZATION CODE / OFFICE SYMBOL

423 SCMS / GUEA

COMMERCIAL PHONE

405-734-7834

DSN PHONE

884-7834

CAGE / REFERENCE NUMBER

81755 / 16K0745-5

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Contractor Determined Location and Method

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 1680010773420RK

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 22 Mar 2023

SUPPLEMENT TO AFLC FORM 761

DATE

NOUN NATIONAL STOCK NUMBER PART NUMBER

Only the checked statement applies to this NSN.

QUALIFICATIONS REQUIREMENTS PRIOR TO 19 OCT 84

• Section F.1 This item qualifies under FAR 9.206-1(a)(2) and the requirements of FAR 9.202(a) are not applicable.

Prequalification of sources is essential to maintain high quality and maximum operational safety.

• Section F.2

(a) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item.

(b) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item.

(c) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet.

Category III capability is permissible.

• Section F.3

The provisions of FAR 9.206-1 and -2, as supplemented, apply. In accordance with AFMCFARS, 1 July 97, Part 5309.206-1(e)(1), Notes A and B apply. Qualification requirements were established prior to 19 Oct 84.

QUALIFICATION REQUIREMENTS AFTER 19 OCT 84

Justification for Qualification Requirement (JQR) is required.

• Section F.1 Prequalification of sources is essential to maintain high quality and maximum operational safety. The requirements of FAR 9.202(a) apply.

• Section F.2

(a) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item.

(b) Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, or manufacturers that have successfully completed all testing on items determined by the government to be similar in complexity and criticality, can be considered approved sources for this item.

• Section F.3 The provisions of FAR 9.206-1 and -2, as supplemented, apply. In accordance with AFMCFARS, 1 July 97, Part 5309.206-1(e)(1), Notes A and D apply. Qualification requirements were established after 19 Oct 84.

EVALUATING ENGINEER/TECHNICIAN (Signature) SYMBOL EXTENSION

OC-ALC Form O-367, JUN 01 (TI)

TECHNICAL DATA PACKAGE – ENGINEERING NOTES (ENs) PAGE 1

OF 3 PAGES

NATIONAL STOCK NUMBER

1680-01-077-3420RK

PART NUMBER

16K0745-5

DATE

September 24, 2020

AFLC FORM 2559 (COMPUTER GENERATED) PREVIOUS EDITION WILL BE USED

1. SURFACE TEXTURE PER ASME B46.1.

2. USE AIA/NAS NASM33540 FOR SAFETY WIRING, IN LIEU OF MS33540.

3. USE A-A-59281 FOR CLEANING COMPOUNDS, IN LIEU OF MIL-C-38736.

4. USE ASTM D4126 FOR VAPOR DEGREASING, IN LIEU OF O-T-620.

5. USE MS20995C32 WIRE PER AIA/NAS NASM20995.

6. PROCURE MS21042L3 SELF LOCKING NUT PER AIA/NAS NASM21042.

7. PROCURE MS24585C290 SPRING PER SAE AS 24585.

8. PROCURE NAS6203-17 BOLT PER AIA/NAS NAS6203.

9. USE MIL-PRF-23827 FOR AIRCRAFT GREASE, IN LIEU OF MIL-G-23827.

10. AN960 CANCELLED. USE AIA/NAS NAS1149 WASHERS IN LIEU OF AN960. SEE TABLE IV FOR PART

NUMBER CONVERSION.

11. PROCURE MS21209F1-10 HELICOIL INSERTS PER AIA/NAS NASM33537, IN LIEU OF MS33537.

12. USE SAE AMS-WW-T-700/3 FOR 2024 SEAMLESS ALUMINUM TUBING, IN LIEU OF WW-T-700/3.

13. USE SAE AMS-QQ-A-200/3 FOR 2024 EXTRUDED ALUMINUM BAR, IN LIEU OF QQ-A-200/3.

14. USE SAE AMS-QQ-A-225/6 FOR 2024 DRAWN ALUMINUM BAR STOCK, IN LIEU OF QQ-A-225/6.

15. USE SAE AS 8879 FOR UNJ SCREW THREAD PROFILES, IN LIEU OF MIL-S-8879.

TECHNICAL DATA PACKAGE – ENGINEERING NOTES (ENs) PAGE 2

NATIONAL STOCK NUMBER

1680-01-077-3420RK

PART NUMBER

16K0745-5

DATE

September 24, 2020

AFLC FORM 2559 (COMPUTER GENERATED) PREVIOUS EDITION WILL BE USED

16. WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE TO THIS PRODUCT

ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: An item, which requires special manufacturing processes, controls, and testing of material or end items. Because of its use or application, failure to maintain the highest reliability of such an item could be catastrophic resulting in loss of life or serious injury, loss of a weapon system or extensive secondary damage, with direct impact on the capability to respond to a national emergency or to achieve wartime sustainability.

(B) CRITICAL CHARACTERISTICS: Characteristics which, when defective, are likely to result in hazardous or unsafe conditions for individuals using, maintaining or depending upon the product; or, are likely to prevent performance of the tactical function of a major end item such as an aircraft, missile, space vehicle, engine or a major part thereof. (Derived from MIL-STD-1916).

(C) MAJOR CHARACTERISTICS: Characteristics (other than critical or minor), which, when defective, are likely to result in failure or to reduce the usability of the product or a major end item for its intended purpose. (Derived from MIL-STD-1916).

(D) MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required

(E) COMPLEX: Items having quality characteristics not wholly visible (hidden characteristics), in the end product for which contractual conformance must be established progressively through precise measurements, tests or controls applied during purchasing, manufacturing, performance, assembly and functional operation either as an individual item or in conjunction with other items [FAR SUBPART 46.203(b)].

(F). COMMERCIAL: Described in commercial catalogs, drawings or industrial standards [FAR SUBPART 46.203(a), (1)].

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW):

____ Engineering critical in application.

______ Critical characteristics.

_____ Major characteristics.

_____ Minor characteristics, all except critical and major.

______ Complex.

______ Available as a commercial product.

TECHNICAL DATA PACKAGE – ENGINEERING NOTES (ENs) PAGE 3

NATIONAL STOCK NUMBER

1680-01-077-3420RK

PART NUMBER

16K0745-5

DATE

September 24, 2020

AFLC FORM 2559 (COMPUTER GENERATED) PREVIOUS EDITION WILL BE USED

17. When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation.

Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes.

Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity.

Lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance.

Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein.

Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel.

When prime design source specifications require or provide for participation by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the cognizant government contract administration office or this procuring activity for assistance.

The contractor is responsible for assuring that all dimensions, conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by themselves and their suppliers. This requirement applies to all characteristics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such.

PROCESS DATA REQUIREMENTS (CHECK WHEN APPLICABLE)

X Prior to beginning of manufacture, the contractor will notify the engineering office of this procuring activity of all manufacturing process and processing procedures intended for use in production of this product. Once these processes are established, no changes shall be made without prior approval of the engineering office of this procuring activity.

SERIALIZATION OF PARTS (CHECK WHEN APPLICABLE)

X Serialization of each part/assembly (contract end item) is required.

ENGINEERING DATA LIST

DATE:

24 SEP 2020

REVISION: 13 *HISTORY*

CAGE:

81755

PAGE:

NSN:

1680010773420RK

DATA TECH:

Choate, Daniel L

END ITEM:

F-16

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

LOCKHEED MARTIN CORPORATION

REFERENCE NUMBER:

16K0745-5

NOUN:

ACTUATOR,ELECTRO-ME

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 81755 16K0745 G 0000 S MANUAL DRIVE ASSY-

CANOPY

Choate, Daniel L 24 SEP 2020

DASH NO -5; ENGR NOTES 1-10,16,17

NAME: DATE:

L 81755 PL 16K0745 N 0000 S PARTS LIST

L 81755 16K0741 E 0000 S GEARSHAFT,BEVEL-INPUT Choate, Daniel L 24 SEP 2020

DASH NO -7; ENGR NOTES 1

NAME: DATE:

L 81755 PL 16K0741 D 0000 S PARTS LIST

L 81755 16K0742 E 0000 S SHAFT,CRANK-MANUAL Choate, Daniel L 24 SEP 2020

DASH NO -7; ENGR NOTES 1

NAME: DATE:

L 81755 PL 16K0742 E 0000 S PARTS LIST

L 81755 16K0743 E 0000 S HANDLE,CRANK-MANUAL Choate, Daniel L 24 SEP 2020

DASH NO -11; ENGR NOTES 1

NAME: DATE:

L 81755 PL 16K0743 G 0000 S PARTS LIST

L 81755 16K0744 B 0000 S COVER,HOUSING Choate, Daniel L 24 SEP 2020

DASH NO -9; ENGR NOTES 1

NAME: DATE:

L 81755 PL 16K0744 C 0000 S PARTS LIST

L 81755 16K0746 E 0000 S GEARSHAFT,BEVEL-OUTPUT Choate, Daniel L 24 SEP 2020

DASH NO -7; ENGR NOTES 1

NAME: DATE:

L 81755 PL 16K0746 E 0000 S PARTS LIST

L 81755 16K0747 B 0000 S HOUSING ASSY,GEAR Choate, Daniel L 24 SEP 2020

DASH NO -1; ENGR NOTES 1,11

NAME: DATE:

L 81755 PL 16K0747 A 0000 S PARTS LIST

L 81755 16K0748 B 0000 S KEY Choate, Daniel L 24 SEP 2020

DASH NO -7; ENGR NOTES 1

NAME: DATE:

L 81755 PL 16K0748 B 0000 S PARTS LIST

L 81755 16K0749 0000 S SPACER Choate, Daniel L 24 SEP 2020

DASH NO -7; ENGR NOTES 1,12

NAME: DATE:

L 81755 PL 16K0749 0000 S PARTS LIST

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 4EDL Version 13Generated by PRPS using Jasper Reports on 22 Mar 2023

24 SEP 2020

REVISION: 13 *HISTORY*

CAGE:

81755

PAGE:

NSN:

1680010773420RK

DATA TECH:

Choate, Daniel L

END ITEM:

F-16

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

LOCKHEED MARTIN CORPORATION

REFERENCE NUMBER:

16K0745-5

NOUN:

ACTUATOR,ELECTRO-ME

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 81755 16K0752 C 0000 S ADAPTER,FLEX SHAFT Choate, Daniel L 24 SEP 2020

DASH NO -9; ENGR NOTES 1,13,14

NAME: DATE:

L 81755 PL 16K0752 C 0000 S PARTS LIST

L 81755 16K0753 0000 S SHIM,LAMINATED Choate, Daniel L 24 SEP 2020

DASH NOS -7,-9,-11; ENGR NOTES 1,14

NAME: DATE:

L 81755 16K753 EO 13X91 S ECO

L 81755 PL 16K0753 A 0000 S PARTS LIST

L 81755 16K0755 B S KNOB,CRANK Choate, Daniel L 24 SEP 2020

DASH NOS -7,-9; ENGR NOTES 1,14

NAME: DATE:

L 81755 PL 16K0755 E S PARTS LIST

L 81755 C3063 F 0000 S SEAL,OIL AND GREASE Choate, Daniel L 24 SEP 2020

DASH NOS -12-20,-20-32; ENGR NOTES 1

NAME: DATE:

L 81755 C4356 AB 0000 S BOLT,SHOULDER Choate, Daniel L 24 SEP 2020

DASH NO -N3D1320; ENGR NOTES 15

NAME: DATE:

L 81755 C7935 E 0000 S BEARING,BALL,ANNULAR Choate, Daniel L 24 SEP 2020

DASH NOS -10-1,-17-1

NAME: DATE:

L 81755 C7936 D 0000 S BEARING,BALL,DEEP GROOVE Choate, Daniel L 24 SEP 2020

DASH NO -17-3

NAME: DATE:

L 81755 P6073 K S COMPOUND,NYLON Choate, Daniel L 24 SEP 2020

DASH NOS -2,-5

NAME: DATE:

L 81755 16Z001 AK 000 S INTERPRETATION OF ENG.

FORMATS

L 81755 FMS-1011 C 0000 S PROCUREMENT SPEC STL,CR-

MO-V-NI

Choate, Daniel L 24 SEP 2020

INCLUDE AM 4

NAME: DATE:

L 81755 FMS-1044 J 0000 S SEALANT,GENERAL USE

L 81755 FPS-1001 H 0000 S CASTING ENG / INSP RQMTS

L 81755 FPS-1003 M 0000 S SEALING SPEC

L 81755 FPS-1029 G R HEAT TREAT D6AC STEEL

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

Page 2 of 4EDL Version 13Generated by PRPS using Jasper Reports on 22 Mar 2023

24 SEP 2020

REVISION: 13 *HISTORY*

CAGE:

81755

PAGE:

NSN:

1680010773420RK

DATA TECH:

Choate, Daniel L

END ITEM:

F-16

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

LOCKHEED MARTIN CORPORATION

REFERENCE NUMBER:

16K0745-5

NOUN:

ACTUATOR,ELECTRO-ME

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 81755 FPS-1082 D 0000 S WELDING PROCESS

L 81755 FPS-3001 E S F-16 FINISH SPEC

L 81755 FPS-3008 G 0000 S MARKING AIRCRAFT PARTS

L 81755 FPS-3014 B 0000 S HEAT TREAT OF STEELS

L 81755 FPS-3017 G 0000 S METAL REMOVAL

PROCEDURES

L 81755 NDTS-1101 K 0000 S NON DESTRUCTIVE TEST STD

L 81755 NDTS-1500 K 0000 S HARDNESS TESTING

L 81755 NDTS-2101 C S MAGNETIC PARTICLE

INSPECTION

L 81755 NDTS-9111 A 0000 S NITAL ETCH INSP

L 00000 A-A-59281 0000 O CLEANING COMPOUND

L 00000 ANSI B6.13 0000 O STRAIGHT BEVEL GEARS

L 00000 AGMA 390.02 0000 O CYLINDRICAL WORMGEARING

TOL/INSP

L 00000 AIA/NAS NAS523 0000 O FASTENER CODE

L 00000 AIA/NAS NAS1101 0000 O SCREW,MACHINE,FLSTER

HEAD

Choate, Daniel L 24 SEP 2020

DASH NO -3H7

NAME: DATE:

L 00000 AIA/NAS NAS1149 0000 O FLAT WASHER

L 00000 AIA/NAS NAS6203 0000 O BOLT

L 00000 AIA/NAS NASM20995 0000 O WIRE,SAFETY OR LOCK

L 00000 AIA/NAS NASM21042 0000 O NUT,SELF LOCKING

L 00000 AIA/NAS NASM33537 0000 O INSERT SCREW THREAD

L 00000 AIA/NAS NASM33540 0000 O SAFETY WIRING

L 00000 ASME B46.1 0000 O SURFACE TEXTURE

L 00000 ASTM D4126 0000 O STD SPEC VAPOR

DEGREASING

L 00000 ASTM D6779 O POLYAMIDE MOLDING

MATERIAL

L 00000 SAE AMS 4218 0000 O ALUMINUM ALLOY CASTINGS

L 00000 SAE AMS 5629 0000 O CRES STEEL BAR

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

Page 3 of 4EDL Version 13Generated by PRPS using Jasper Reports on 22 Mar 2023

24 SEP 2020

REVISION: 13 *HISTORY*

CAGE:

81755

PAGE:

NSN:

1680010773420RK

DATA TECH:

Choate, Daniel L

END ITEM:

F-16

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

LOCKHEED MARTIN CORPORATION

REFERENCE NUMBER:

16K0745-5

NOUN:

ACTUATOR,ELECTRO-ME

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 00000 SAE AMS-QQ-A-200/3 0000 O AL ALLOY

2024,BAR,ROD,EXTRUDED

L 00000 SAE AMS-QQ-A-225/6 0000 O AL ALLOY

2024,BAR,ROD,DRAWIN

L 00000 SAE AMS-WW-T-700/3 0000 O TUBE,ALUMINUM ALLOY,2024

L 00000 SAE AS 24585 0000 O SPRING

L 00000 SAE AS 8879 0000 O SCREW THREAD PROFILE,UNJ

L 00000 MIL-S-7742 0000 O SCREW THREAD STANDARD

L 00000 MIL-PRF-23827 0000 O GREASE,AIRCRAFT

L 00000 QPL-23827 0000 O QUALIFIED PRODUCTS LIST

STANDARD ENGINEERING TEXT

Choate, Daniel L 24 SEP 2020

RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE.REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND DOCUMENTS: THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305 AND OR L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE PROCESSES AND OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS, SPECIFICATIONS AND DOCUMENTS.THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH MIL SPEC, MIL STD, INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE DATE OF THIS CONTRACT UNLESS OTHERWISE NOTED.

NAME: DATE:

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

Page 4 of 4EDL Version 13Generated by PRPS using Jasper Reports on 22 Mar 2023

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20302301229-00 VERSION: 1

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL Long Line Packaging MIL B

ITEM(S):

1680010773420RK

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

UNIT PACK

LENGTH

UNIT PACK

WIDTH

UNIT PACK

DEPTH

UNIT PACK

CUBE OPI

1 AAA 51 1 00 JA NA B ED EC B 19 2.00 10.5 10.5 8.5 0.542 O

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

USE 9 UNITS OF DESICCANT.

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Mallory, Aaron D

PHONE NUMBER:

405-582-9768 / 852-9768

SIGNATURE:

//SIGNED//Mallory, Aaron D

DATE:

23079 - 20 MAR 2023

Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 22 Mar 2023

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20302301229-00

DATE INITIATED:

20 MAR 2023

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 Freight Classification Description 52.247-53 Marking of Shipments 47.305-10 Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

IAW BASIC CONTRACT FD20302301229-00

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 97X4930.FC04 643 47GT 15F16Z 01N000 00000 GGGTTT 503000 F03000 FSR: 013352 PSR: K31827

First Destination Transportation Account Code: FRS2

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA:

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 1680010773420RK

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): SW3210

Mark For: Account 09

Ship To (Address): DLA DISTRIBUTION DEPOT HILL

CML 385 519 8898

HILL AFB UT 84056-5734

84056 - 5734

USA

WPOD:

APOD:

BBP / CCP:

RIC: 1

Requisition Number:

Supplemental Address:

FMS Case:

7537 WARDLEIGH RD BLDG 849W

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

Page 1 of 2DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 22 Mar 2023

NAME

Carter, Glenn A

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-327-8309 / 497-8309

SIGNATURE

//SIGNED//Carter, Glenn A

DATE

20 MAR 2023

Page 2 of 2DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 22 Mar 2023