Statment of Work.pdf

Statement of Work (SOW) Horizontal Pivot Band Saw ONE (1) each

Background:

a. Requiring Organization Defense Distribution Depot Oklahoma City OK

b. History Machine is required to replace outdated machine currently in place.

c. Purpose of the Statement of Work (SOW):

Purchase new Horizontal Pivot Band Saw ONE (1) each.

1. Scope of Work to be Performed by Contractor:

The contractor shall provide all necessary labor and material to construct

ONE (1) new Horizontal Pivot Band Saw. All equipment furnished shall be new from the manufacturer’s most current production and meet current industry standards, and conform to the best quality of materials and workmanship.

Accessories not specifically mentioned herein, but necessary to furnish complete system ready for use, shall also be included and named. All transportation/shipping and installation shall be provided by the contractor.

The Horizontal Pivot Band Saw must be equivalent to or greater than the below listed salient characteristics.

2. Salient Characteristics:

• Rectangular Capacity: 0-12.75” W x 0-12.75” H

• Square Capacity: 0-12” (Square)

• Round Capacity: 0-12.75” (Diameter)

• Bar Feed: 0-24” (Stroke Air -4 Index)

• Motor: 3hp

• Operation Type: Automatic

• Power Source: Air

• Blade Size: 12,10” L x 1” H x .035 W

• Bundle cut capable: Yes

• Full Function Control Console

• Adjustable Vise main & feed

• 2 Hold down fixtures

• Carbide blade guides

• Adjustable feed rate

• Flood coolant system with washdown hose

• 220v 3ph electrical power source

• 24” Solid discharge table (bolts to saw)

• Adjustable clamping force

• Manual adjustment guide arm

• Variable speed blade with LED readout

• Manual blade tension

• Adjustable cutting pressure

• Blade brush

• Broken blade function

• Safety guards

Exterior color – Manufacturers Standard.

Warranty Coverage - Warranty coverage shall be manufacturer’s standard warranty but not less than one year parts and labor.

Operator, Parts and Service Manual(s) and Training – The contractor shall provide with delivery, one (1) complete set of manuals per Horizontal Pivot Band Saw.

3. Definitions of Terms and Abbreviations:

a. DDOO Defense Depot, Oklahoma City, OK

b. SOW Statement of Work

4. Description of Contractor’s Tasks:

Task 1: Fabricate and Deliver of ONE (1) each Horizontal Pivot Band Saw.

5. Certification and Acceptance:

Final acceptance of the Horizontal Pivot Band Saw will be performed by personnel at the receiving location.

6. Project Management Approach:

7. Performance and/or Delivery Schedule:

The contractor shall coordinate the delivery with POC listed below.

8. Shipping Location:

QTY: 1ea Defense Logistics Agency Defense Distribution Depot, Oklahoma City OK 3420 D Ave. Building 1 Door 80 Tinker AFB, OK 73145 ATTN: Tambren Ghoram @ 405-822-3822