Statement of Work (SAP)_DT705A UPGRADE_v0.pdf

v1.2_FEBRUARY2021

PR NO.1301063920

PID NO: N66604-23-SIMACQ-NPT-15-0227

STATEMENT OF WORK

(SOW)

DT-705A UPGRADE

PR No. 1301063920

PID N66604-23-SIMACQ-NPT-15-0227

1.0 Background

The Fleet Sensors & Cables Engineering Branch (Code 1535) of the Sensors and Arrays Division (Code 153) of the Naval Undersea Warfare Center Division Newport serves as the Navy's Technical Design Agent (TDA), and In-Service Engineering Agent (ISEA) and assists with Acquisition Engineering Agent (AEA) activities for surface ship and submarine transducers, hydrophones, and sensor assemblies (collectively referred to as transducers). Code 1535 maintains the Navy's transducer inventory in large part by establishing contract vehicles to procure transducers that are delivered both to the stock system to support emergent fleet needs and to new construction shipyards for initial outfitting.

1.1 Places of Performance

All work will be performed at the contractor’s facility or a facility that the contractor specifically arranges.

1.2 Authorized Users

This contract is applicable to the Sensors and SONAR Department, Code 15, of the Naval Undersea Warfare Center Division Newport, RI.

1.3 Sponsors

• PMS 401 Submarine Acoustic Systems

1.4 Types of Funding

• Other Procurement, Navy (OPN)

2.0 Scope

This Statement of Work (SOW) defines the tasks required to upgrade DT-705A sensor assemblies to the latest DT-705A Production version per Engineering Change Proposal (ECP) 4117NE036. The Government will supply ten DT-705A sensor assemblies to Falmouth Scientific, Inc. as government furnished property (GFP). The DT-705A upgrade is required to provide the latest version of DT-705A sensors to support Fleet needs.

v1.2_FEBRUARY2021

PR NO.1301063920

PID NO: N66604-23-SIMACQ-NPT-15-0227

3.0 Applicable Documents

The contractor shall perform the tasking required in Section 4.0 in accordance with the below Applicable Documents. Additional specifications and standards applicable to this procurement are referenced in the Navy documents identified herein.

3.1 NAVSEA Drawing No. 53711- Critical Item Performance Specification (CIPS) for

7333534 Rev L, the DT-705A Sensor Assembly

3.2 NAVSEA Drawing 53711- Assembly, Top, DT-705A (Contains Engineering

7615410 Rev F, Change Proposal (ECP) 4117NE036).

4.0 Technical Requirements

This SOW defines the task to upgrade ten DT-705A sensor assemblies in accordance with (IAW) NAVSEA Drawing 53711-7615410 Rev F (contains Engineering Change Proposal (ECP)

4117NE036).

4.1 Ten DT-705A sensor assemblies will be provided as GFE, and shall be used to upgrade to

DT-705A sensor assemblies IAW NAVSEA Drawing 53711-7615410F (per ECP 4117NE036) and Critical Item Product Specification (CIPS) for the DT-705A Sensor Assembly, Drawing No. 53711 -7333534L.

4.1.1 Perform incoming inspection including production test.

4.1.2 Replace the conductivity cell.

4.1.3 Calibrate DT-705A Sensor Assembly.

4.1.4 The contractor shall perform the production tests identified in Critical Item Product

Specification (CIPS) for the DT-705A Sensor Assembly, Drawing No. 53711 -7333534L.

4.1.5 The contractor shall perform a twenty percent sample lot, production control radiated acoustic noise test, identified in Critical Item Product Specification (CIPS) for the DT- 705A Sensor Assembly, Drawing No. 53711 -7333534L.

4.1.6 Deliverables: The contractor shall deliver Production Acceptance Test and Inspection data per CDRL A001.The contractor shall develop a Certification Card for each upgraded DT-705A sensor assembly delivered as ready-for-issue (as shown in the DT-705A sensor assembly CIPS). The contractor shall deliver Certification Cards per CDRL A002.