Statement of work for WaterMist discrep.doc

DOC document 31 KB Posted

Attached to
CGC WEDGE WATER MIST SYSTEM RETROFIT Federal contract opportunity
Solicitation number
70Z08521PP45D6300
Issued by
Department of Homeland Security US Coast Guard

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work for USCGC WEDGE water mist system

Location of work to be performed:

USCGC CHENA (75307)

1900 Coast Guard Rd.

Demopolis, AL 36732 Period of Performance:

1st choice: week of 3 May 2021 2nd choice: week of 10 May 2021 Points of Contact:

Vessel: CGC WEDGE Derek Perendy, MKC

(715) 218-7762

Derek.M.Perendy@uscg.mil Product Line Support:

Justin Blais, LTJG

(410) 762-6950 justin.r.blais@uscg.mil Vessel Details:

USCGC CHENA is moored at above address with restricted access. Access to cutter is gained by establishing communications with vessel point of contact above.

Description of Problem:

While having annual system service of their Chemetron Water Mist system completed a faulty pressure switch was discovered. During follow up testing and verification a catastrophic failure of nitrogen discharge components resulted in un-repairable damage. Replacement components are no longer manufacture by Chemetron (out of business) and not supported by any other fire suppression system manufacture. Replacement of the old obsolete system with a new approved system is recommended.

Current System:

Chemetron Fire systems, Part# 10540060 Serial# 730750

Replacement System:

Marioff HI-FOG High-Pressure Water Mist System

Work to be performed:

1. Techs will travel to cutter and remove current installed system

2. provide, install, and test new Marioff HI-FOG High-Pressure Water Mist equipment in accordance with the latest edition editions of NFPA 70- National Electrical Code (NEC), NFPA 72-National Fire Alarm & Signaling Code and NFPA 750- Standard on Water Mist Fire Protection Systems, including standards (FM Global, ASME, ANSI, ASTM, IMO, & USCG) and listing requirements referenced therein.

3. Replace the currently installed Micro 1-EV Releasing Fire Alarm Controls with a new Kidde Fire Systems (KFS) Aegis-XLT Releasing Fire Alarm Panel.

File details come from the government source that posted it. Updated .