Statement_of_Work_(Draft)_1.pdf
PDF 424 KB Posted
- Attached to
- Downhole Logging Consulting and Equipment Services Federal contract opportunity
- Solicitation number
- 140G0324Q0002
About this file
This statement of work outlines consulting services and equipment required by the California Water Science Center Research Drilling Program. The contractor shall provide a minimum of 90 magnetic rings and one magnetic sensor probe, along with onsite training for installation and use of the equipment at multiple well sites in the California Central Valley near Lost Hills. The magnetic rings and probe are used to precisely measure aquifer compaction through multi-level compaction well technology. Services are expected to begin on or around February 28, 2024 and last 30 days, with equipment delivery to the USGS in Las Vegas and training in California. The related pre-solicitation for downhole logging consulting and equipment services is being conducted by the Department of the Interior US Geological Survey Office of Acquisitions and Grants under solicitation number 140G0324Q0002.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF Work
Magnetic rings, sensor probe, design consultation and training for installation of magnetic ring extensometer sites in San Joaquin Valley, CA
I. General Information:
The California Water Science Center (CAWSC) Research Drilling Program (RDP) requires consulting services and equipment. Services will be on site in the California Central Valley and include instruction on installation of magnetic rings and the running of the downhole probe for measurements. Equipment are borehole magnetic rings and the downhole logging probe. These services and equipment are to be supplies and manufactured by the contractor. The equipment must be developed and deployed to measure aquifer‐system compaction and must be successfully deployed multi‐level compaction well (MLCW) technology that utilizes magnetic rings directly attached to the aquifer formation where the cumulative distances between successive rings can be precisely measured. The magnetic rings, magnetic sensor probe and other related equipment, along with consultation and training for the design, installation, and implementation of the technology is needed to meet the USGS mission and CAWSC project goals to provide data that will help water managers make more informed sustainable groundwater management decisions.
2. Quantities:
A minimum of 90 magnetic rings and 1 magnetic sensor probe plus a flat consulting fee for onsite training of installation and logging of completed extensometer. The magnetic sensor probe must be used for multiple MLCW installations.
3. When needed:
Expected start date is approximately February 28, 2024 and last roughly 30 days. However, award in advance is needed so travel plans can be made, equipment can be built and drilling site can be permitted.
4. Delivery
Hard products (probes, rings) should be delivered to USGS Research Drilling Program 3595 E Patrick Lane #100/200 Las Vegas NV. Technical assistance shall take place on the California Aqueduct near Lost Hills CA .Map attached below. Location: 35°34'52.21"N, 119°40'41.48"W.
File details come from the government source that posted it. Updated .